jcarroll Posted February 16, 2020 Share Posted February 16, 2020 1 hour ago, Clayton said: Hello, I've noticed since adding a P2000 GPU to my UnRaid server (using it for Plex and handbrake) that I have a near 50/50 chance of my server booting if it's headless. I can plug in a monitor to the server and see where it stuck at if the WebGUI hasn't responded in some time after boot and it looks to always be stuck here. Not sure if there is a log or something else I can produce that gives better insight. I didn't have any issue until enabling this NVidia plugin and plex use of it. would anyone have any thoughts? im using unraid 6.8.2 I'm in the exact same boat with a P2000. Link to comment
j0nnymoe Posted February 16, 2020 Share Posted February 16, 2020 5 hours ago, jcarroll said: I'm in the exact same boat with a P2000. Only thing we can suggest is, trying another usb stick? reseat the GPU or use a different PCI-e slot? Link to comment
jcarroll Posted February 16, 2020 Share Posted February 16, 2020 7 hours ago, j0nnymoe said: Only thing we can suggest is, trying another usb stick? reseat the GPU or use a different PCI-e slot? It is directly tied to the nvidia install though. It boots first time, every time if it's not installed. Install it and I can't boot. Period. That, to me, seems like it's not a USB problem. I will try to reseat though. Link to comment
guyonphone Posted February 16, 2020 Share Posted February 16, 2020 (edited) Hello, I have been using this plugin for a while now, and it's always worked great until unRaid 6.8.0. I want to upgrade to 6.8.2, however when I open the plugin, it just sits at "Updating Available Builds" and never progresses. unraid-syslog-20200216-2053.zip Edited February 16, 2020 by guyonphone Link to comment
Conson Droppa Posted February 16, 2020 Share Posted February 16, 2020 2 hours ago, guyonphone said: Hello, I have been using this plugin for a while now, and it's always worked great until unRaid 6.8.0. I want to upgrade to 6.8.2, however when I open the plugin, it just sits at "Updating Available Builds" and never progresses. unraid-syslog-20200216-2053.zip 39.16 kB · 0 downloads piHole on your network? Link to comment
Clayton Posted February 16, 2020 Share Posted February 16, 2020 Not sure if I have been lucky so far but after posting my question about being able to boot headless with my P2000 GPU, I have been lucky 4 times in a row starting last night. I mentioned that I was using unraid 6.8.2 but I didn't say that I just updated to it. since the update I re-installed the plugin and so far it has been working. nock on wood but maybe the update fixed it... last night a parity check kicked off so im waiting for that to finish before I attempt another headless reboot. will update you if it continues to behave. Link to comment
guyonphone Posted February 17, 2020 Share Posted February 17, 2020 5 hours ago, rmeaux said: piHole on your network? I do have a piHole, and I did see some others having issues with that, but... I checked the query log, and refreshed after clicking on the plugin, and don't see the piHole blocking anything from "*digitalopenspaces.com". My unraid network settings, are not set to use the piHole for DNS. I have unRaid set to use 1.1.1.1 I disabled the piHole for 5 minutes, and tried, and had the same issue. Link to comment
zerolim1t Posted February 17, 2020 Share Posted February 17, 2020 what program can i use to convert files and use my nvidia card to convert a file? Link to comment
Marshalleq Posted February 17, 2020 Share Posted February 17, 2020 48 minutes ago, zerolim1t said: what program can i use to convert files and use my nvidia card to convert a file? Tdarr. Link to comment
j0nnymoe Posted February 17, 2020 Share Posted February 17, 2020 5 hours ago, guyonphone said: I do have a piHole, and I did see some others having issues with that, but... I checked the query log, and refreshed after clicking on the plugin, and don't see the piHole blocking anything from "*digitalopenspaces.com". My unraid network settings, are not set to use the piHole for DNS. I have unRaid set to use 1.1.1.1 I disabled the piHole for 5 minutes, and tried, and had the same issue. Have you changed anything else on your network? Link to comment
guyonphone Posted February 17, 2020 Share Posted February 17, 2020 44 minutes ago, j0nnymoe said: Have you changed anything else on your network? Not that I can tell, or am aware of. I can browse to https://lsio.ams3.digitaloceanspaces.com/ in a browser and I get an XML page. So I don't believe I am being blocked. Link to comment
j0nnymoe Posted February 17, 2020 Share Posted February 17, 2020 45 minutes ago, guyonphone said: Not that I can tell, or am aware of. I can browse to https://lsio.ams3.digitaloceanspaces.com/ in a browser and I get an XML page. So I don't believe I am being blocked. Have you had to change any MTU settings or anything? there's not really much else I can suggest looking at. All previous cases of this is there had been some change to a users network. 1 Link to comment
guyonphone Posted February 17, 2020 Share Posted February 17, 2020 (edited) 7 hours ago, j0nnymoe said: Have you had to change any MTU settings or anything? there's not really much else I can suggest looking at. All previous cases of this is there had been some change to a users network. Ah! Shoot, yes, you are right. I did change my MTU setting, to Jumbo frames a while back! I am using 10 gigabit so it's really been helping the speeds, and so far there hadn't been any negative consequences. I take it that's the cause? The thing that get's me here, MTU is Layer 2, I have a firewall. So when unRaid sends packets to my firewall, the MTU size is 9000, but the firewall should be tearing down those ethernet frames and rebuilding them to send to the cable modem at 1500 MTU with it's mac address, and in return the MTU size should be 1500 from the modem to firewall to unRAID on the return path. I guess I don't exactly get why this is hanging up this plugin. unRAID otherwise has perfectly fine access to the internet. Thanks! Edited February 17, 2020 by guyonphone Link to comment
surfshack66 Posted February 17, 2020 Share Posted February 17, 2020 Hello - So I have 2 GPUs in my server. 1 is dedicated to plex transcoding. I tried assigning the other to a VM but it crashed KVM. Has anyone else experienced this issue? Link to comment
sjaak Posted February 17, 2020 Share Posted February 17, 2020 34 minutes ago, surfshack66 said: Hello - So I have 2 GPUs in my server. 1 is dedicated to plex transcoding. I tried assigning the other to a VM but it crashed KVM. Has anyone else experienced this issue? i have 3 GPU and no problems at all. 1 for GUI boot (gt710), 1 for Plex (1050ti) and a Vega64 for the VM's (reset bug is still there). are you sure you didn't assigned the wrong one? Link to comment
surfshack66 Posted February 17, 2020 Share Posted February 17, 2020 (edited) On 2/17/2020 at 1:19 PM, sjaak said: i have 3 GPU and no problems at all. 1 for GUI boot (gt710), 1 for Plex (1050ti) and a Vega64 for the VM's (reset bug is still there). are you sure you didn't assigned the wrong one? Interesting. Also, I'm sure I didn't assign the wrong one. EDIT: Both cards the same. Not sure if that matters. Edited February 19, 2020 by surfshack66 Link to comment
jcarroll Posted February 18, 2020 Share Posted February 18, 2020 I'm still struggling to get Unraid to boot after installing this. I can provide whatever you need. Also willing to let someone remote in if that would help. I'd like to get my P2000 back to work. Link to comment
dlandon Posted February 21, 2020 Share Posted February 21, 2020 I am implementing Nvidia GPU support into my Zoneminder docker and having an issue with the driver version. I am installing cuda and cudnn version 10.2 and compiling support for the GPU in a module called 'opencv'. I do not have a Nvidia GPU so I depend on users to provide feedback. ndivia-smi reports driver version 440.40, but cuda wants to install nvidia utils for 440.33. I can get the compile to work by forcing cuda-10.2 to be installed. This is fine for the moment, but when I do an apt-get update, cuda wants to update the 440.33 driver which isn't installed, so it fails. I have no idea what triggers the 440.33 driver, when the 440.40 driver is installed. Any ideas on where I can go to get an answer? I can carry on this conversation via PM if desired. Link to comment
knutarn Posted February 22, 2020 Share Posted February 22, 2020 Hey! Way, is this show so many transcode? I play 2 movier on my plex now (same account) And how i know the gpu be use? Link to comment
Distinguished Posted February 22, 2020 Share Posted February 22, 2020 On 2/15/2020 at 8:54 PM, jcarroll said: I'm in the exact same boat with a P2000. Similarly, I'm running an Xeon E5-2648Lv2 on a Supermicro X9SRH-7F board and no matter what NVIDIA Unraid build I try, it will kernel panic with my Quadro P400 inserted. Also, it will kernel panic MOST times (90%+) on any build when the card is not even inserted. My processor has the VT-d instruction set and by all other metrics it looks like the Unraid Nvidia builds should work, but they won't. I always get one of two kernel panics after unpacking initramfs. Link to comment
jcarroll Posted February 22, 2020 Share Posted February 22, 2020 53 minutes ago, Distinguished said: Similarly, I'm running an Xeon E5-2648Lv2 on a Supermicro X9SRH-7F board and no matter what NVIDIA Unraid build I try, it will kernel panic with my Quadro P400 inserted. Also, it will kernel panic MOST times (90%+) on any build when the card is not even inserted. My processor has the VT-d instruction set and by all other metrics it looks like the Unraid Nvidia builds should work, but they won't. I always get one of two kernel panics after unpacking initramfs. 6.8.1 worked flawlessly. Is there a way to downgrade? Link to comment
Squid Posted February 22, 2020 Share Posted February 22, 2020 3 hours ago, jcarroll said: 6.8.1 worked flawlessly. Is there a way to downgrade? Just go to the plugin and select the appropriate version of unRaid nVidia from the dropdown. Link to comment
Stevefo Posted February 23, 2020 Share Posted February 23, 2020 How do I properly update Nvidia Unraid? I assume I should upgrade stock Unraid 6.8.1 to 6.8.2, then upgrade Nvidia Unraid from 6.8.1 to 6.8.2 Link to comment
Cessquill Posted February 23, 2020 Share Posted February 23, 2020 7 minutes ago, Stevefo said: How do I properly update Nvidia Unraid? I assume I should upgrade stock Unraid 6.8.1 to 6.8.2, then upgrade Nvidia Unraid from 6.8.1 to 6.8.2 No. Just go to the plugin and install Nvidia 6.8.2 - a full version of Unraid with extra drivers. 1 Link to comment
Recommended Posts