Kewjoe Posted September 24, 2021 Share Posted September 24, 2021 I'm using the cloudflare ddns docker. It was working fine, but i noticed today it was not updating my ip with cloudflare any longer. I get the following error in the logs: ERROR: Failed to update CloudFlare DNS record <redacted zone> from <redacted ip> to ;; connection timed out; no servers could be reached I've tried restarting the docker. All other dockers or anything else on my unraid server is not having any kind of connectivity issue. Quote Link to comment
jaylo123 Posted September 27, 2021 Share Posted September 27, 2021 Hi. The speedtest tracker container running v1.12.0 currently has a broken feature. The graphs don't change to anything other than the 7 day default view. I recently discovered that my 1Gbps line is performing fine for uploads (980Mbps) but downloads are ~90 to ~200Mbps. I wanted to look up my history to see when this happened so I can call my ISP. The historical data is there as I can see a median result over the lifetime of me running the container. The graphs just don't adjust. This is a known bug, and there is a fix in 1.12.2, but the container itself is still running 1.12.0. I couldn't tell from the github ticket whether or not it's actually released to anything other than the dev branch though. Quote Link to comment
jaylo123 Posted October 1, 2021 Share Posted October 1, 2021 (edited) On 9/27/2021 at 10:57 AM, Jason Harris said: Hi. The speedtest tracker container running v1.12.0 currently has a broken feature. The graphs don't change to anything other than the 7 day default view. I recently discovered that my 1Gbps line is performing fine for uploads (980Mbps) but downloads are ~90 to ~200Mbps. I wanted to look up my history to see when this happened so I can call my ISP. The historical data is there as I can see a median result over the lifetime of me running the container. The graphs just don't adjust. This is a known bug, and there is a fix in 1.12.2, but the container itself is still running 1.12.0. I couldn't tell from the github ticket whether or not it's actually released to anything other than the dev branch though. Update: This will, I assume, be fixed soon. But since I needed this sooner for my discussions with my ISP I made the following change to the "Repository" for the container in Unraid: Modified from henrywhitaker3/speedtest-tracker to henrywhitaker3/speedtest-tracker:dev (appended :dev to the end) Saved, restarted the container. It grabbed the dev branch, and confirmed, the graphs work again. Once the main branch is updated with the graph fix, I'll switch the repository back. As expected, all historical data is still there. *non-relevant information for the docker issue, but a use case for this docker* As it turns out, I've been losing ~7% of my download bandwidth since August 26th about every 3 days. Tech support is sending someone out to check my line and the main fiber panel at the end of my street Tuesday, October 5th. And a large part of that was due to this information. I didn't notice it before because it was slowly and slowly dropping. 45 day graph: I'm supposed to be getting ~950Mb/s down, I'm NOW getting ~36Mb/s down! Yikes! We both are wondering if I'll be at dial-up speeds by Tuesday... Time to bust out an old US Robotics 56.6... Edited October 1, 2021 by Jason Harris clarity Quote Link to comment
henryw3 Posted October 1, 2021 Share Posted October 1, 2021 Hey @Jason Harris yeah I need to move these changes into master but have been mad busy recently. Off the top of my head this fix is the only real difference between the 2 images at the moment so nothing else should break by using it 1 Quote Link to comment
BalloonPark Posted October 1, 2021 Share Posted October 1, 2021 On 4/17/2021 at 3:38 AM, AwesomeAustn said: I had the same issue. I just downloaded it from https://prometheus.io/download/ and copied the yaml file to the volume I mounted. I had Prometheus running previously, using this guide : https://unraid.net/blog/prometheus. I messed up something with my cache drive, and now I'm getting permission denied for the Prometheus appdata folder and cannot paste the .yml file into /appdata/prometheus/etc like I had done previously. Does anyone know how to restore permissions? I've tried uninstalling and reinstalling the Prometheus Docker container and Prometheus Node Exporter with no luck. Quote Link to comment
andrew207 Posted October 8, 2021 Share Posted October 8, 2021 (edited) Using Monica, the web server doesn't seem to bind appropriately: Monica v3.2.0 is set up, enjoy. Database ready.AH00558: apache2: Could not reliably determine the server's fully qualified domain name, using 127.0.0.1. Set the 'ServerName' directive globally to suppress this message (98)Address already in use: AH00072: make_sock: could not bind to address [::]:80 (98)Address already in use: AH00072: make_sock: could not bind to address 0.0.0.0:80 no listening sockets available, shutting down Nothing written to the "logs" folder in the default volume. In unraid UI, port 80 is mapped to an unused high port. I couldn't find any environment variables or volumeised config for changing port 80 to something else. Any ideas? Probably something silly! Edited October 8, 2021 by andrew207 Quote Link to comment
shwa87 Posted October 10, 2021 Share Posted October 10, 2021 idrac6 issue here. I am experiencing this issue as raised on github: Server disconnected : Code 1006 · Issue #34 · DomiStyle/docker-idrac6 · GitHub I tried searching the UR forums (this thread and the whole forum) and couldn't find any resolution. Maybe I missed it, and if I did, I apologize. Does anyone know what the solution is for this? Quote Link to comment
casperse Posted October 10, 2021 Share Posted October 10, 2021 Hi All I just experienced my Unraid system to be really unresponsive and some of my dockers stopped running. I found the reason - it was this docker: Seedsync Looks like this docker was created under the Selfhostersnets-template so hoping someone can help me? I did have the parameter set: --cpus=2 --memory=3G --log-opt max-size=50m --log-opt max-file=1 --restart unless-stopped --user 99:100 Anyone who can help me get this working? Quote Link to comment
zapp8rannigan Posted October 11, 2021 Share Posted October 11, 2021 Hi all, Hope i'm putting this in the right thread! Just started having problems with Komga today. Logs show: 21:10:38.293 [main] ERROR org.springframework.boot.SpringApplication - Application run failed Its been working fine, don't recall changing anything? Quote Link to comment
TheProfosist Posted October 14, 2021 Share Posted October 14, 2021 looking for some help with deemix docker. I cant delete or modify the files that it downloads via a Win10 computer over SMB complete details are over in this thread Quote Link to comment
TheProfosist Posted October 15, 2021 Share Posted October 15, 2021 (edited) 2 hours ago, TheProfosist said: looking for some help with deemix docker. I cant delete or modify the files that it downloads via a Win10 computer over SMB complete details are over in this thread resolved I needed to set umask for the docker. by default it is set to 0022 but unraid which is just root for delete/modify. 0002 worked for me some say to just use 0000 but I read that is more insecure an example of the dialog is in a previous resilio sync post A post explaining umask options https://www.cyberciti.biz/tips/understanding-linux-unix-umask-value-usage.html Edited October 15, 2021 by TheProfosist 1 Quote Link to comment
DanRegalia Posted October 18, 2021 Share Posted October 18, 2021 Just a quick question on the draw.io. I'm trying to set it up, but everytime I hit install (new app store, on 6.9.2). I show Draw.io, Network type Bridge, Shell command is Shell. Webui port is 3000, basically leaving it all as is. It's not working... I hit apply/done and it goes right back to the left side flyout install again asking me to install. I'm 100% sure it's me. Do I need to give it a new IP address, or it's own internal IP address? Pardon my stupidity if that's the case... but I'm guessing I would give it a custom/br0 address and let it get assigned via dhcp. But then I only have apply and reset available... not done... I feel like I'm missing something big here. lol. Quote Link to comment
casperse Posted October 18, 2021 Share Posted October 18, 2021 On 10/10/2021 at 7:43 PM, casperse said: Hi All I just experienced my Unraid system to be really unresponsive and some of my dockers stopped running. I found the reason - it was this docker: Seedsync Looks like this docker was created under the Selfhostersnets-template so hoping someone can help me? I did have the parameter set: --cpus=2 --memory=3G --log-opt max-size=50m --log-opt max-file=1 --restart unless-stopped --user 99:100 Anyone who can help me get this working? Can anyone share whats wrong with this docker template? I have installed it 3 times and after some time it just fills up the entire docker file and crashes everything There isnt any special fancy setup its pretty basic? maybee some logfile that isnt configured correctly? I did set all the special parameters and it still crashed Quote Link to comment
fatalicus Posted October 19, 2021 Share Posted October 19, 2021 Question about the Mango package: Does this package not contain the default downloader that Mango is supposed to have? I can for the life of me not find out how to get any downloader to work, without downloading, say the MangaDex, from the original creators plugin repo, which he says not to use and which hasn't been updated in quite a while. Quote Link to comment
Twinkie0101 Posted October 22, 2021 Share Posted October 22, 2021 Recently installed speedtest-tracker and tests run successfully, but have errors daily. Below is recent log entries: {"type":"log","timestamp":"2021-10-17T17:00:07Z","message":"Failed to resolve host name. Cancelling test suite.","level":"error"} {"type":"log","timestamp":"2021-10-17T19:00:06Z","message":"Error: [11] Cannot read from socket: Resource temporarily unavailable","level":"error"} {"type":"log","timestamp":"2021-10-18T00:00:07Z","message":"Failed to resolve host name. Cancelling test suite.","level":"error"} {"type":"log","timestamp":"2021-10-18T15:00:03Z","message":"Error: [104] Cannot read from socket: Connection reset by peer","level":"error"} {"type":"log","timestamp":"2021-10-18T16:00:08Z","message":"Error: [110] Cannot open socket: Timeout occurred in connect.","level":"error"} {"type":"log","timestamp":"2021-10-18T17:00:02Z","message":"Error: [104] Cannot read from socket: Connection reset by peer","level":"error"} {"type":"log","timestamp":"2021-10-18T23:00:05Z","message":"Error: [110] Cannot open socket: Timeout occurred in connect.","level":"error"} {"type":"log","timestamp":"2021-10-19T01:00:05Z","message":"Error: [0] Cannot read from socket: ","level":"error"} {"type":"log","timestamp":"2021-10-19T02:00:07Z","message":"Error: [110] Cannot open socket: Timeout occurred in connect.","level":"error"} {"type":"log","timestamp":"2021-10-19T22:00:05Z","message":"Error: [104] Cannot read from socket: Connection reset by peer","level":"error"} {"type":"log","timestamp":"2021-10-20T20:00:07Z","message":"Error: [110] Cannot open socket: Timeout occurred in connect.","level":"error"} {"type":"log","timestamp":"2021-10-20T21:00:03Z","message":"Error: [0] Cannot read from socket: ","level":"error"} {"type":"log","timestamp":"2021-10-21T14:00:03Z","message":"Error: [104] Cannot read from socket: Connection reset by peer","level":"error"} {"type":"log","timestamp":"2021-10-21T15:00:05Z","message":"Error: [110] Cannot open socket: Timeout occurred in connect.","level":"error"} {"type":"log","timestamp":"2021-10-21T20:00:07Z","message":"Error: [11] Cannot read from socket: Resource temporarily unavailable","level":"error"} {"type":"log","timestamp":"2021-10-21T21:00:06Z","message":"Error: [0] Cannot read from socket: ","level":"error"} {"type":"log","timestamp":"2021-10-21T22:00:03Z","message":"Error: [104] Cannot read from socket: Connection reset by peer","level":"error"} {"type":"log","timestamp":"2021-10-22T01:00:06Z","message":"Error: [11] Cannot read: Resource temporarily unavailable","level":"error"} Not really sure what is causing the issue so would appreciate any insight others may have. Here is my config: Quote Link to comment
TexasDave Posted October 26, 2021 Share Posted October 26, 2021 I am looking for some help in setting up AirConnect in unRAID. The docker seems to run fine but I am not seeing my two ChromeCast devices listed, just the native AirPlay app on my TV shows up on my clients. Where is the best place to get some help? Here? Or on the GitHub page? I kind of hate to post something on the GitHub as I am sure it is "pilot error" and nothing wrong with the docker.... Can anyone share how they have configured the docker in unRAID? Most posts I see see no changes are needed and it should run out of the box? I am betting it is my router that is causing the issue? I am on an ASUS RT-AC86U running Merlin. I do have "IGMP Snooping" snooping enabled. What port forwarding is needed and how do folks do this? Any pointers would be appreciated. Thanks! Quote Link to comment
razzam21 Posted November 19, 2021 Share Posted November 19, 2021 Ninja no longer working. The system did an update last night on the ninja invoice container and it will no longer start. I verified that that database it still up and running. The only show this standard_init_linux.go:211: exec user process caused "exec format error" each time you try and start the container. Quote Link to comment
whwunraid Posted December 1, 2021 Share Posted December 1, 2021 Scrutiny - Nice!!!! BUT Celsius - really dude, c'mon at least gives us the Fahrenheit option!? 😱 Quote Link to comment
Alfy1080 Posted December 10, 2021 Share Posted December 10, 2021 Hello. Sorry if i am posting in the wrong place, but is LDAPforPlex still being supported? I tried to wrap my head around it into making it work but so far i got nothing. I installed the container and provided the token, ID, server name during the setup and in order to test it I wanted to connect to it using Apache Directory Studio. I selected anonymous authentication as per the guide and while ADS connects succesfully to the LDAP server, i can not see anything in there. No schema, no tree, nothing. I also tested by configuring it as an LDAP provider for Emby but if i try to log in with the user's email or userID i get the invalid credentials error. Am I missing something or doing something wrong? Thank you in advance! Quote Link to comment
anti Posted December 13, 2021 Share Posted December 13, 2021 On 10/26/2021 at 7:37 AM, TexasDave said: I am looking for some help in setting up AirConnect in unRAID. The docker seems to run fine but I am not seeing my two ChromeCast devices listed, just the native AirPlay app on my TV shows up on my clients. Where is the best place to get some help? Here? Or on the GitHub page? I kind of hate to post something on the GitHub as I am sure it is "pilot error" and nothing wrong with the docker.... Can anyone share how they have configured the docker in unRAID? Most posts I see see no changes are needed and it should run out of the box? I am betting it is my router that is causing the issue? I am on an ASUS RT-AC86U running Merlin. I do have "IGMP Snooping" snooping enabled. What port forwarding is needed and how do folks do this? Any pointers would be appreciated. Thanks! before the update, it worked perfect for me then I had to update and break it ugh. I can't get it to work either with the newest update Quote Link to comment
mkono87 Posted December 13, 2021 Share Posted December 13, 2021 (edited) Trying to get invoiceninja working but when I load the ui I get Error: app is already configured, backup then delete the .env file to re-run the setu Cant find the .env in appdata. Where is it? Edited December 13, 2021 by mkono87 Quote Link to comment
eagle470 Posted December 17, 2021 Share Posted December 17, 2021 Is Selfhosters still supporting 'Searcharr'? I don't see it listed in this thread and development seems inactive. I would much prefer telegram over discord for privacy reasons. Quote Link to comment
ThatTallGuy21 Posted December 20, 2021 Share Posted December 20, 2021 Can someone tell me if the Cloudflare container is impacted by the Log4j vulnerability? Quote Link to comment
GoChris Posted December 21, 2021 Share Posted December 21, 2021 Getting this error on the discordbot now. Probably after a docker update? Not sure, I backup/restart everynight. "Error: Command '['/data/venv/bin/python', '-Im', 'ensurepip', '--upgrade', '--default-pip']' returned non-zero exit status 1." Solution? I did delete and re-create the container (kept appdata) Quote Link to comment
Evidenz Posted December 21, 2021 Share Posted December 21, 2021 24 minutes ago, GoChris said: Getting this error on the discordbot now. Probably after a docker update? Not sure, I backup/restart everynight. "Error: Command '['/data/venv/bin/python', '-Im', 'ensurepip', '--upgrade', '--default-pip']' returned non-zero exit status 1." Solution? I did delete and re-create the container (kept appdata) You are not alone. I have the same issue since the update and do not get the bot to run. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.