alturismo Posted March 10, 2020 Share Posted March 10, 2020 2 hours ago, JoeUnraidUser said: Could you create a separate post with the instructions? It would make it much easier for users to follow along. actually idk where to put a small tutorial about this feature, which subforum ? im pretty sure not allowed to create posts in announcements etc ... Quote Link to comment
_0m0t3ur Posted March 10, 2020 Share Posted March 10, 2020 (edited) 16 minutes ago, alturismo said: actually idk where to put a small tutorial about this feature, which subforum ? im pretty sure not allowed to create posts in announcements etc ... What about making a guide and posting it here: //home/community/guides/docker containers (https://forums.unraid.net/forum/71-docker-containers/) Edited March 10, 2020 by DoItMyselfToo Quote Link to comment
Lev Posted March 10, 2020 Share Posted March 10, 2020 @bonienlvery nice improvements and fixes. I always much appreciate this minor releases where the Ux gets a bit more polish 🥰 Flawless upgrade from 6.8.2. Everything in the logs and system behavior is as expected. 1 Quote Link to comment
Ryoko Posted March 10, 2020 Share Posted March 10, 2020 (edited) Smooth update on the Home server from 6.8.2->6.8.3. The new kernel fixed my nvme IO_PAGE_FAULT issue, which is awesome!! I was also able to easily get the AMD cache thing running on my VMs with a simple Edit->Update to each of them. Awesome work as always Limetech! EDIT/UPDATE: Work server also updated from 6.8.2->6.8.3 with no issues. Edited March 11, 2020 by ryoko227 updated Quote Link to comment
testdasi Posted March 10, 2020 Share Posted March 10, 2020 5 hours ago, alturismo said: actually idk where to put a small tutorial about this feature, which subforum ? im pretty sure not allowed to create posts in announcements etc ... Talk to SpaceInvader One and collab on a vid? 1 Quote Link to comment
MTA99 Posted March 10, 2020 Share Posted March 10, 2020 Upgraded from 6.8.2. ~24 hours uptime with no issues 👍 1 Quote Link to comment
BoxOfSnoo Posted March 10, 2020 Share Posted March 10, 2020 (edited) Tried to upgrade, but I get a blank dialog, and nothing displays. Rebooting but nothing is coming up. Edit: I did a hard powerdown and it came up at 6.8.2 again, and the update worked as it should. Pretty sure I have an array to repair now though. Edited March 10, 2020 by BoxOfSnoo Cold boot Quote Link to comment
testdasi Posted March 10, 2020 Share Posted March 10, 2020 Uneventful update from 6.8.2 2 Quote Link to comment
SpencerJ Posted March 11, 2020 Share Posted March 11, 2020 21 hours ago, alturismo said: actually idk where to put a small tutorial about this feature, which subforum ? im pretty sure not allowed to create posts in announcements etc ... https://forums.unraid.net/forum/69-guides/ here would be great! Quote Link to comment
tazman Posted March 11, 2020 Share Posted March 11, 2020 Upgrade from 6.7.2 -> 6.8.3 without problems. 1 Quote Link to comment
alturismo Posted March 11, 2020 Share Posted March 11, 2020 9 hours ago, SpencerJ said: https://forums.unraid.net/forum/69-guides/ here would be great! may take a look if its ok like this, if not let me know please. 2 Quote Link to comment
bubbaQ Posted March 12, 2020 Share Posted March 12, 2020 Had to downgrade back to Version 6.7.2 due to bug in turbo-write not working properly in 6.8.x Quote Link to comment
bonienl Posted March 12, 2020 Share Posted March 12, 2020 5 hours ago, bubbaQ said: Had to downgrade back to Version 6.7.2 due to bug in turbo-write not working properly in 6.8.x Can you make a bug report? Quote Link to comment
JorgeB Posted March 12, 2020 Share Posted March 12, 2020 49 minutes ago, bonienl said: 6 hours ago, bubbaQ said: Had to downgrade back to Version 6.7.2 due to bug in turbo-write not working properly in 6.8.x Can you make a bug report? It's not a bug, he's referring to the auto change from reconstruct write to r/m/w when there's multiple array disk activity, I did mention before that I would much prefer this would only happen when write mode was set to auto, never when set to reconstruct write. Quote Link to comment
bonienl Posted March 12, 2020 Share Posted March 12, 2020 1 hour ago, johnnie.black said: It's not a bug, he's referring to the auto change from reconstruct write to r/m/w when there's multiple array disk activity, I did mention before that I would much prefer this would only happen when write mode was set to auto, never when set to reconstruct write. But why the downgrade? Quote Link to comment
JorgeB Posted March 12, 2020 Share Posted March 12, 2020 3 minutes ago, bonienl said: But why the downgrade? Because that feature was only introduced on v6.8.0 Quote Link to comment
itimpi Posted March 12, 2020 Share Posted March 12, 2020 8 hours ago, johnnie.black said: It's not a bug, he's referring to the auto change from reconstruct write to r/m/w when there's multiple array disk activity, I did mention before that I would much prefer this would only happen when write mode was set to auto, never when set to reconstruct write. I would consider that it IS a bug if setting explicit reconstruct write in the Settings does not actually make it run exclusively in that mode. Like you I think this behaviour is not unreasonable if the (default) mode of Auto is selected, but I think it should not be the behaviour if a user has asked for an explicit behaviour. Quote Link to comment
testdasi Posted March 12, 2020 Share Posted March 12, 2020 +1 what itimpi said. Having the smart switch actually makes it very confusing to help with those "why is write so slow" questions. I also don't consider the smart switch being that smart because I have found switching to r/m/w actually make it worse than remaining in reconstruct with a small number of simultaneous activities. Quote Link to comment
JorgeB Posted March 12, 2020 Share Posted March 12, 2020 11 minutes ago, itimpi said: I would consider that it IS a bug if setting explicit reconstruct write in the Settings does not actually make it run exclusively in that mode. I won't call it a bug since @limetechdid it on purpose, but yeah, making a change so that behavior only takes place when "auto" is selected would IMHO be much better, especially since there's already the auto setting for so long and it does nothing. Quote Link to comment
bubbaQ Posted March 12, 2020 Share Posted March 12, 2020 39 minutes ago, testdasi said: +1 what itimpi said. Same here. Quote Link to comment
Mikael888 Posted March 12, 2020 Share Posted March 12, 2020 Hi, having problems updating from 6.6.1 . Getting this message from both the Update OS tool and from the Plugins menu: plugin: updating: unRAIDServer.plg plugin: downloading: https://s3.amazonaws.com/dnld.lime-technology.com/stable/unRAIDServer-6.8.3-x86_64.zip ... failed (File I/O error) plugin: wget: https://s3.amazonaws.com/dnld.lime-technology.com/stable/unRAIDServer-6.8.3-x86_64.zip download failure (File I/O error) It reaches 5% on the Zip download, and then this. Thank you Quote Link to comment
Squid Posted March 12, 2020 Share Posted March 12, 2020 8 minutes ago, Mikael888 said: Hi, having problems updating from 6.6.1 . Getting this message from both the Update OS tool and from the Plugins menu: plugin: updating: unRAIDServer.plg plugin: downloading: https://s3.amazonaws.com/dnld.lime-technology.com/stable/unRAIDServer-6.8.3-x86_64.zip ... failed (File I/O error) plugin: wget: https://s3.amazonaws.com/dnld.lime-technology.com/stable/unRAIDServer-6.8.3-x86_64.zip download failure (File I/O error) It reaches 5% on the Zip download, and then this. Thank you How much memory do you have? Quote Link to comment
Mikael888 Posted March 12, 2020 Share Posted March 12, 2020 3 minutes ago, Squid said: How much memory do you have? I have 8gb installed, and 75% usage with the array all up and running. Quote Link to comment
SliMat Posted March 12, 2020 Share Posted March 12, 2020 Not sure if this is a bug or not... so thought I'd ask... Just upgraded from 6.8.2 to 6.8.3 on a production server and everything seems to be working but the docker containers all show "version: not available"; When I first noticed this only a couple of containers showed not available, so I rebooted the machine again and now they all show this. The machine definitely has internet access as it is remote and I am connecting over the internet. Also, it hosts some webservers which are working OK... or at least the websites are showing OK. Thanks Quote Link to comment
bonienl Posted March 12, 2020 Share Posted March 12, 2020 Click on "Check for Updates" to get the up-to-date status. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.