cluengas Posted July 6, 2023 Share Posted July 6, 2023 Udated to UNRAID OS VERSION 6.12.2 without any issues! My Unraid server is not too complicated but I run 5 docker containers, 4 VMs, and I also use it as a local file server. Thanks!! C 1 Quote Link to comment
Featured Comment SpencerJ Posted July 7, 2023 Featured Comment Share Posted July 7, 2023 FYI for anyone running the Nvidia-plugin and having Docker instability: 2 Quote Link to comment
aetek5 Posted July 9, 2023 Share Posted July 9, 2023 Hi, I experience a weird behavior that after the update, my server disappears from the network. Like in my router I can't find my server connected to the network. I hooked the server to a monitor and keyboard but I only get a black screen and have to hard shutdown the server to reboot it. Anyone experience this behavior? ts140-diagnostics-20230709-1435.zip Quote Link to comment
Squid Posted July 9, 2023 Share Posted July 9, 2023 6 hours ago, aetek5 said: Hi, I experience a weird behavior that after the update, my server disappears from the network. Like in my router I can't find my server connected to the network. I hooked the server to a monitor and keyboard but I only get a black screen and have to hard shutdown the server to reboot it. You should enable the syslog server (mirror to flash) and when it happens again create a new thread in General Support and include your diagnostics and the resulting syslog file saved in /logs on the flash drive. You might also want to look at your system event log in the BIOS, because this is exactly how systems with ECC are supposed to react if an uncorrectable memory error happens -> effectively shut down to prevent data corruption from propagating. Quote Link to comment
aetek5 Posted July 9, 2023 Share Posted July 9, 2023 21 minutes ago, Squid said: You should enable the syslog server (mirror to flash) and when it happens again create a new thread in General Support and include your diagnostics and the resulting syslog file saved in /logs on the flash drive. You might also want to look at your system event log in the BIOS, because this is exactly how systems with ECC are supposed to react if an uncorrectable memory error happens -> effectively shut down to prevent data corruption from propagating. Thank you for the advice. I enabled syslog server mirror to flash and will create the thread. I will look into the event log in the bios but it didn't shut down. Server was still running but not interactable. But maybe the bios will have more info. Thank you so much. Quote Link to comment
jmbailey2000 Posted July 10, 2023 Share Posted July 10, 2023 (edited) EDIT: Never mind. Found stuff that said a reboot is the only way. Well, once again, wouldn't shut down after sitting for an hour and couldn't kill any process to make it complete, so force a reboot and now will sit around and wait 30 hours for a parity check to finish. Then 6.12.2 is gone. I came from 6.9.2 but am going to try and down grade to 6.11.5. Well, 6.12.2 has been a total disaster. I can't reboot the server without it failing shutdown, even trying to stop any open processes, etc. So every reboot causes a parity check. Once I let it finish the check, I found the docker.img file corrupt. Got that fixed, and now I find the /mnt/user folder is "missing" or labeled as ?user in MC. When I look at ls-l for the user folder is shows as "d???????" and all other fields for the listing as "?". I can't install any new dockers now even though I was able to install all previous dockers to rebuild the docker.img file. I want to downgrade but this missing /mnt/user file has me concerned because now docker what start because of missing path. What can I do to get it back, just recreate the folder under /mnt or is there something else that needs to be done to fix it. Edited July 11, 2023 by jmbailey2000 Quote Link to comment
Jambo Posted July 11, 2023 Share Posted July 11, 2023 15 hours ago, jmbailey2000 said: EDIT: Never mind. Found stuff that said a reboot is the only way. Well, once again, wouldn't shut down after sitting for an hour and couldn't kill any process to make it complete, so force a reboot and now will sit around and wait 30 hours for a parity check to finish. Then 6.12.2 is gone. I came from 6.9.2 but am going to try and down grade to 6.11.5. Well, 6.12.2 has been a total disaster. I can't reboot the server without it failing shutdown, even trying to stop any open processes, etc. So every reboot causes a parity check. Once I let it finish the check, I found the docker.img file corrupt. Got that fixed, and now I find the /mnt/user folder is "missing" or labeled as ?user in MC. When I look at ls-l for the user folder is shows as "d???????" and all other fields for the listing as "?". I can't install any new dockers now even though I was able to install all previous dockers to rebuild the docker.img file. I want to downgrade but this missing /mnt/user file has me concerned because now docker what start because of missing path. What can I do to get it back, just recreate the folder under /mnt or is there something else that needs to be done to fix it. I had the same issue and also downgraded to a previous version. I had to "edit" each docker container, resave it (Delete one character and add it back to unlock save button) and the container worked again. Everything works fine after downgrading to 6.11.4. Also found 6.12.1 to be a nightmare. Quote Link to comment
Niklas Posted July 11, 2023 Share Posted July 11, 2023 (edited) I used macvlan for years with Unraid. Now it just crashes and make my system unstable (tried it out for a couple of hours, bad mistake. CKSUM errors on cache while downloading and writing to cache, problems with docker disk img). What changed? Ipvlan works fine but I can't see the individual containers and usage in the router with that. Edited July 11, 2023 by Niklas Quote Link to comment
PeteAsking Posted July 14, 2023 Share Posted July 14, 2023 (edited) Was able to upgrade without any issues from 6.11.5 I think it was before. Edited July 14, 2023 by PeteAsking 1 Quote Link to comment
ljm42 Posted July 14, 2023 Share Posted July 14, 2023 If anyone is having issues with the array not stopping, there is a quick fix in https://forums.unraid.net/topic/141479-6122-array-stop-stuck-on-retry-unmounting-disk-shares/#comment-1283203 Unraid 6.12.3-rc3 has the fix built in, if you'd like to test it: 1 Quote Link to comment
BastianBayer Posted July 18, 2023 Share Posted July 18, 2023 I´ve got the Problem that the server won´t boot anymore after the update.. MSI Z590, 11700K. The Last line while booting sequenze befor the display blacks out and is bzfirmware checksum and than a Line that starts with i915 but its to fast i cant read the rest of the line. Has anyone a solution for that maybe just to boot in the gui to restore to 6.11.5 when everything worked perfectly? Quote Link to comment
JorgeB Posted July 18, 2023 Share Posted July 18, 2023 15 minutes ago, BastianBayer said: Line that starts with i915 Did you try this: https://docs.unraid.net/unraid-os/release-notes/6.12.0#crashes-related-to-i915-driver Quote Link to comment
OsoPolar Posted July 18, 2023 Share Posted July 18, 2023 (edited) HI Guys Having a nightmare i waited untill version 6.12.3 rolled ouit before updating. I stopped my VM's with VM manager and my Docker Continers manually took array offline. The used O/S updater everything went fine no errors reported or seen. On reboot no VM's no Containers showing what can i do to get them back ? bearcave-diagnostics-20230718-1653.zip Ignore added to general support Edited July 18, 2023 by OsoPolar Quote Link to comment
itimpi Posted July 18, 2023 Share Posted July 18, 2023 Does not (I think) explain your problem, but it looks like the Settings for the Parity Check Tuning plugin are a bit strange Could you go to the plugins settings under Settings->Scheduler, make a change and hit apply to write a new set. If you could then post diagnostics again I can check if they now look more like what I would expect. Quote Link to comment
OsoPolar Posted July 18, 2023 Share Posted July 18, 2023 Here you go bearcave-diagnostics-20230718-1741.zip Quote Link to comment
itimpi Posted July 18, 2023 Share Posted July 18, 2023 2 minutes ago, OsoPolar said: Here you go bearcave-diagnostics-20230718-1741.zip 114.52 kB · 0 downloads Thanks - the settings for the plugin now look sensible. I suspect the ones you had were a legacy from quite some time ago and you had not revisited the settings page to update them. the next thing to try and tidy is what is causing the invalid entry in the syslog of the form: Jul 18 17:16:11 Bearcave crond[1173]: failed parsing crontab for user root: 04*** /usr/local/emhttp/plugins/user.scripts/startCustom.php /boot/config/plugins/user.scripts/scripts/qBittorrent Mover/script > /dev/null 2>&1 To resolve this I would suggest you go into the console level and then post the output of running: cat /etc/cron.d/root and hopefully identify what has inserted the problem entries. i know this is not solving your current problem, but by getting these little things out of the way hopefully we have a cleaner syslog to help with diagnosing the main problem. Quote Link to comment
OsoPolar Posted July 18, 2023 Share Posted July 18, 2023 https://logs.notifiarr.com/?d8b6fdbdb5ed9a65#C6yg1537MFU5K4kCD176UXF9EypxygTjBcke2SDA42ot Quote Link to comment
itimpi Posted July 18, 2023 Share Posted July 18, 2023 2 minutes ago, OsoPolar said: https://logs.notifiarr.com/?d8b6fdbdb5ed9a65#C6yg1537MFU5K4kCD176UXF9EypxygTjBcke2SDA42ot Ok - that shows the invalid entry seems to be a User Script called 'qBittorrent Mover'. The fields at the start of the entry are meant to be space separated but the spaces seem to be absent. Not sure if this is a custom schedule you created or not? To get back to you original problem I do not see any obvious reason for you having issues at the moment, but having tidied up these 2 issues it might be worth rebooting to give you a cleaner starting position. Quote Link to comment
OsoPolar Posted July 18, 2023 Share Posted July 18, 2023 (edited) HI confused what you mean this is the file I used Trash guide from here Edited July 18, 2023 by OsoPolar Quote Link to comment
OsoPolar Posted July 18, 2023 Share Posted July 18, 2023 I have rebooted and nothing has changed the script looks correct from looking at the guides again bearcave-diagnostics-20230718-1754.zip Quote Link to comment
OsoPolar Posted July 18, 2023 Share Posted July 18, 2023 (edited) If use restore will it put everything back to normal ? Edited July 18, 2023 by OsoPolar Quote Link to comment
itimpi Posted July 18, 2023 Share Posted July 18, 2023 3 hours ago, OsoPolar said: HI confused what you mean this is the file I used Trash guide from here It is not the script that is the problem - it is the information about when it should be run. Quote Link to comment
OsoPolar Posted July 19, 2023 Share Posted July 19, 2023 Hi Please can you help me understand i followed the guide what do need to change ? Quote Link to comment
Kilrah Posted July 19, 2023 Share Posted July 19, 2023 There needs to be spaces between the characters of the schedule. Quote Link to comment
OsoPolar Posted July 19, 2023 Share Posted July 19, 2023 OK Fixed that HI I have added every docker back as suggested but none of the apps open from the web gui All of them are blank pages see image Here is a log just from one app Radarr https://paste.centos.org/view/8d8aea0a Quote Link to comment
Recommended Posts
Posted by SpencerJ,
0 reactions
Go to this post
Posted by SpencerJ,
2 reactions
Go to this post
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.