mmz06 Posted September 14, 2021 Share Posted September 14, 2021 (edited) 2 hours ago, francrouge said: Hi all Just a litlle question about the transcode folder. If i enable the igpu intel does the transcode folder works ? Because i don't see any files in my transcode folder when i'm transcoding movies thx Hi, This is the case for my configuration at least. i5 9600K with UHD630 De nada 🙂 Edited September 14, 2021 by mmz06 Quote Link to comment
furian Posted September 16, 2021 Share Posted September 16, 2021 no fix yet for the issues with 11th gen cpu's and unraid 6.10.0-rc1? Quote Link to comment
Cessquill Posted September 20, 2021 Share Posted September 20, 2021 Hi - I've posted on the Plex forums, but it might be an Unraid/Docker issue - not sure. Last week I... Installed a 500GB SSD specifically for Plex as its own Pool Created a pool, named it "plex", added the drive, formatted it as XFS and put an appdata folder on it Moved my "plexmediaserver" folder from "mnt/cache/appdata" to "mnt/plex/appdata" using MC (copied and then archived the original once all files present) Repointed my plexmediaserver's config and transcode settings from "mnt/cache/appdata..." to "mnt/plex/appdata..." All works except for streaming live TV to the Chromecast. Fine in browser, but casting gives “Sorry! Something went wrong” and have the following in the logs (amongst other things)... Sep 19, 2021 08:57:35.272 [0x145bdb10fb38] ERROR - [Transcoder] [mpeg2video @ 0x15177d248600] Invalid frame dimensions 0x0. Appreciate that this looks like a Plex issue, but checking in here just in case I've done something wrong or somebody else has the same issue. Could also be a coincidence that Chromecast support broke at the same time. Quote Link to comment
BigFam Posted September 20, 2021 Share Posted September 20, 2021 There seem to be a few things that are misconfigured if my understanding is correct (or could be what terms you are using). First, a "pool" is always cache, ie it will belong to the array (although you can configure the share to "prefer" the cache). To have Plex configuration and persistent storage installed on a dedicated SSD, I 4hink you need to format it outside the array and mount the disk using unassigned devices plugin.What is the reason for you configuration?There are numerous recommendations on how to configure Plex on unraid. Skickat från min iPhone med Tapatalk Quote Link to comment
BigFam Posted September 20, 2021 Share Posted September 20, 2021 Also, are you sure only Chromecast broke? Or is it all transcode playback that broke? The latter would indicate misconfiguration of the transcode folder as if Plex is unable to write to the location. Skickat från min iPhone med Tapatalk Quote Link to comment
BigFam Posted September 20, 2021 Share Posted September 20, 2021 When you moved folders using MC. Did you move share to share or file folder to file folder? You should NEVER move from share to file folder or vice versa. It's asking for trouble. Skickat från min iPhone med Tapatalk Quote Link to comment
trurl Posted September 20, 2021 Share Posted September 20, 2021 18 minutes ago, BigFam said: First, a "pool" is always cache, ie it will belong to the array (although you can configure the share to "prefer" the cache). No this is all wrong. Unraid 6.9+ allows multiple pools which you can name as you wish. A pool named "cache" is often kept from previous versions, but you don't have to, and you can have others that you name as you wish. And even when there was just cache, it never "belonged to the array". Only the disks in the parity array belong to the array. Cache and other pools do belong to user shares, as do the array data disks. Quote Link to comment
alturismo Posted September 20, 2021 Share Posted September 20, 2021 59 minutes ago, Cessquill said: All works except for streaming live TV to the Chromecast. Fine in browser, but casting gives “Sorry! Something went wrong” and have the following in the logs (amongst other things)... as it works in browser (which is usually also a transcode) the setup itself should be fine, this belongs more to the plex forums ... Quote Link to comment
BigFam Posted September 20, 2021 Share Posted September 20, 2021 12 minutes ago, trurl said: No this is all wrong. Unraid 6.9+ allows multiple pools which you can name as you wish. A pool named "cache" is often kept from previous versions, but you don't have to, and you can have others that you name as you wish. And even when there was just cache, it never "belonged to the array". Only the disks in the parity array belong to the array. Cache and other pools do belong to user shares, as do the array data disks. Thanks for stepping in and correcting my false claims. Sorry for any confusion. I learned a lot from my mistake... Quote Link to comment
Cessquill Posted September 20, 2021 Share Posted September 20, 2021 Cheers guys. Yes, other transcoding works fine - both with browser and Chromecast (although haven't tested exhaustively). And I'd added another pool with the intention of pulling all Plex activity off my Cache/regular docker pool. And moved it folder to folder (copy rather than move for safety). Used to have it on an unassigned device pre cache pools, and remembered access needed to be Slave Read/Write. Didn't know whether there were any similar requirements when running from an alternate location. Or whether I'd messed up permissions when copying over. Figured it was more of a Plex issue, but thought I'd try my luck here as support from Plex can be hit and miss. Thanks again. 1 Quote Link to comment
tooviral Posted September 22, 2021 Share Posted September 22, 2021 Hello, Tryin to repair the database and not sure how to stop plexmediaserver in the docker img. Tried "service plexmediaserver stop" doesn't work Any ideas? Quote Link to comment
Sap1ent Posted September 28, 2021 Share Posted September 28, 2021 On 9/22/2021 at 5:23 PM, tooviral said: Hello, Tryin to repair the database and not sure how to stop plexmediaserver in the docker img. Tried "service plexmediaserver stop" doesn't work Any ideas? I am also very keen to know this so I can try and repair the .db! Quote Link to comment
dirtymike0330 Posted September 28, 2021 Share Posted September 28, 2021 (edited) Hello! Just working on finishing up my migration from Windows PMS to unRAID. I have migrated my metadata and most of my media (several TB still transferring). I am moving over the following folders from my storage to unRAID share called "Media": 4K Movies, Videos, TV Shows, Exercise. I have setup the docker and had no problem accessing Plex, locally and remotely. On the web gui, I was able to the library paths to assign Movies and TV Shows (They still showed Windows drive letters). However, when I try to edit my libraries for Exercise and 4K Movies, no content is showing, although it is definitely on the share. Any thoughts? Solved: I just needed to move the paths up one level in the Plex docker settings. I had Movies pointing to /movies and TV pointing to /tv, but I moved them back up to Media so that Plex could then see my 4K Movies and Exercise folders as well for adding to the libraries. Edited September 29, 2021 by dirtymike0330 Solution Quote Link to comment
furian Posted September 29, 2021 Share Posted September 29, 2021 any clue on when the 11th gen cpu's are fully supported? i still get artifacts during transcoding of 2160p.. Quote Link to comment
gacpac Posted October 1, 2021 Share Posted October 1, 2021 Hey guys it's been couple times that my server has done this. Any thoughts? Normally I reboot the container Sent from my Pixel 2 XL using Tapatalk Quote Link to comment
capt.shitface Posted October 1, 2021 Share Posted October 1, 2021 On 9/29/2021 at 3:25 PM, furian said: any clue on when the 11th gen cpu's are fully supported? i still get artifacts during transcoding of 2160p.. I have the same problem, and recently i have been getting artifacts when i just transcode regular 1080p. I get white dots... see screenshot. I tried latest RC of unraid, but then i cant transcode at all. i have just hoped that there will be some plex-update. Anyone with the same problem? Any ideas? Unraid: 6.9.2 CPU: 11th Gen Intel® Core™ i5-11600K RAM: 32Gb ddr4 (transcode to ram) Quote Link to comment
arturovf Posted October 1, 2021 Share Posted October 1, 2021 2 hours ago, capt.shitface said: I have the same problem, and recently i have been getting artifacts when i just transcode regular 1080p. I get white dots... see screenshot. I tried latest RC of unraid, but then i cant transcode at all. i have just hoped that there will be some plex-update. Anyone with the same problem? Any ideas? Unraid: 6.9.2 CPU: 11th Gen Intel® Core™ i5-11600K RAM: 32Gb ddr4 (transcode to ram) It's a known problem and nobody knows for sure when it will be fixed. In plex forums they are testing a new improved transcoder with rocket lake support planned but still it will take some time to make it to normal releases, so we have no choice but wait Quote Link to comment
capt.shitface Posted October 1, 2021 Share Posted October 1, 2021 3 hours ago, arturovf said: It's a known problem and nobody knows for sure when it will be fixed. In plex forums they are testing a new improved transcoder with rocket lake support planned but still it will take some time to make it to normal releases, so we have no choice but wait Ok! Thank for answer! Do you know any active thread about the subject i can follow? I can only find a old closed one... Also, i didnt have the issue with white pixel before (atleast what im aware of) i think it was an update that broke it. I knew the problem with 4k HDR 10bit transcode. Quote Link to comment
Kishin Posted October 2, 2021 Share Posted October 2, 2021 (edited) Hello, since the last update, all TVs can't connect to my server. But PCs are fine. In my logs i have : "Critical: libusb_init failed" Any ideas or should i just roll back to previous version? Thanks. Edited October 2, 2021 by Kishin Quote Link to comment
tamito Posted October 2, 2021 Share Posted October 2, 2021 13 hours ago, Kishin said: Hello, since the last update, all TVs can't connect to my server. But PCs are fine. In my logs i have : "Critical: libusb_init failed" Any ideas or should i just roll back to previous version? Thanks. I also experience the same issue as you. All android device can't connect to plex. ios can. Quote Link to comment
Mogo Posted October 3, 2021 Share Posted October 3, 2021 2 hours ago, tamito said: I also experience the same issue as you. All android device can't connect to plex. ios can. It might be related to this article on the plex forums. https://forums.plex.tv/t/important-information-about-plex-for-smart-tvs-after-september-30-2021/746506 Basically it seems like some tv's lost support for secure connections. 1 Quote Link to comment
LFFPicard Posted October 3, 2021 Share Posted October 3, 2021 Hi Hi, Right I am getting a not authorized message when trying to access my server and my plex settings simply show it as unavailable or not there at all. I have tried a few fixes and nothing has worked and I fear I am making things worse. First a quick background as to what led to this. I had a power cut today, a rather bad powercut. BUT I have a UPS and this kept the server running and performed a graceful shutdown before the battery ran out. Once I was back up and running I noticed I had an email saying someone had logged into my Plex account. So I went and changed my password and ticked the box "Log out all devices" - I also noticed I had some docker updates, including Plex so I updated all the dockers. Now nothing seems to be working. I have tried a couple things. - Complete shutdown and reboot again - removing preferences.xml to try a warm reboot. - I logged out of all accounts when doing this and have not been presented with a setup screen when logging back in. - Adding the Plex_Claim key to the docker and restarting it. I done this within the 4minutes but that achieved nothing. I am now in the process of restoring my backed up appdata to see if that fixes it. Any ideas would be much appreciated, it is almost 3am and I am pulling my hair out here. Quote Link to comment
LFFPicard Posted October 3, 2021 Share Posted October 3, 2021 Update: An appdata restore made things worse... I now can not load Plex as I get the following: Quote Link to comment
Kishin Posted October 3, 2021 Share Posted October 3, 2021 4 hours ago, Mogo said: It might be related to this article on the plex forums. https://forums.plex.tv/t/important-information-about-plex-for-smart-tvs-after-september-30-2021/746506 Basically it seems like some tv's lost support for secure connections. Thanks it worked ! Quote Link to comment
LFFPicard Posted October 3, 2021 Share Posted October 3, 2021 Another update: After running another appdata restore to the week before has resolved the last issue I reported but I am still unable to get into my server as per my first post. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.