Lignumaqua Posted March 27, 2021 Share Posted March 27, 2021 Recently I've been getting the 'unRaid's built in FTP server is currently disabled, but users are defined' warning every day. I've tried adding it to the ignored list it but it doesn't help. So, I thought I'd try UNignoring it and then REignoring it. However the 'Monitor Warning/Error' button doesn't work. Looking in the browser console I can see why. There is an unescaped apostrophe which is breaking the JavaScript. This is the line: <input type="button" id="1360801943" value="Monitor Warning / Error" onclick="readdError("unRaid" s= built in ftp server is currently disabled, but users are defined",this.id);'<td> Looks like the apostrophe in the text unRaid's built in ftp server isn't being dealt with correctly which leads to an 'Uncaught SyntaxError' when the button is clicked. Quote Link to comment
Lignumaqua Posted March 29, 2021 Share Posted March 29, 2021 Looks like 'unRaid's built in FTP server is running' has the same problem. The 'Monitor Warning/Error' button doesn't work because of the single quote/apostrophe breaking the JavaScript. Any suggestions on how to fix this? Quote Link to comment
Squid Posted March 29, 2021 Author Share Posted March 29, 2021 3 minutes ago, Lignumaqua said: Looks like 'unRaid's built in FTP server is running' has the same problem. The 'Monitor Warning/Error' button doesn't work because of the single quote/apostrophe breaking the JavaScript. Any suggestions on how to fix this? If the error came up before the Update that fixed this (2021.03.14), then you need to delete ignoreList.json from /config/plugins/fix.common.problems on the flash drive Quote Link to comment
isrdude Posted March 29, 2021 Share Posted March 29, 2021 I have a backup server that doesn't have any cache at all. However, Fix Common Problems keeps telling me that I need to download SSD Trim? Any clues??? Thanks in advance Quote Link to comment
Lignumaqua Posted March 30, 2021 Share Posted March 30, 2021 12 hours ago, Squid said: If the error came up before the Update that fixed this (2021.03.14), then you need to delete ignoreList.json from /config/plugins/fix.common.problems on the flash drive Thanks, but I've tried that. In fact I deleted everything and started again. Still has this problem I'm afraid, the single quotes in these two error fields break the JavaScript 'Monitor Warning/Error' buttons. Version installed is 2021.03.24 Quote Link to comment
Squid Posted March 30, 2021 Author Share Posted March 30, 2021 17 hours ago, isrdude said: I have a backup server that doesn't have any cache at all. However, Fix Common Problems keeps telling me that I need to download SSD Trim? Any clues??? Thanks in advance I would need to see your diagnostics Quote Link to comment
isrdude Posted March 30, 2021 Share Posted March 30, 2021 (edited) Hi Squid! Thanks for looking at this in advance. This just came up out of no where. Never had a cache drive or SSD on this unit. I added the plugin and the warning went away. So you could see it, I removed the plug in and now the warning is back. Strangely, my primary unit, that does have a SSD cache hasn't had this pop up tower2-diagnostics-20210330-1507.zip Edited March 30, 2021 by isrdude Quote Link to comment
bombz Posted March 31, 2021 Share Posted March 31, 2021 (edited) On 3/25/2021 at 9:33 AM, trurl said: It shouldn't be difficult to know whether or not you have a plugin installed. Look on the Plugins page. What do you get from the command line with this? ls -lah /boot/config/plugins/*.plg Hello see attached I should be able to delete the .txz and plex should disappear However, in the past when I have done this. Unraid GUI still shows plex as installed within the 'settings' page. Any thoughts? Edited March 31, 2021 by bombz Quote Link to comment
Squid Posted March 31, 2021 Author Share Posted March 31, 2021 4 hours ago, bombz said: I should be able to delete the .txz and plex should disappear You also have to reboot. If it reappears after that, then post your entire diagnostics file Quote Link to comment
trurl Posted March 31, 2021 Share Posted March 31, 2021 5 hours ago, bombz said: delete the .txz You have to delete the .plg or it will attempt to download the .txz again. Probably wouldn't succeed in this case but in general you delete the .plg file and it won't be reinstalled after rebooting. Quote Link to comment
Squid Posted March 31, 2021 Author Share Posted March 31, 2021 There is no plg showing in that list. Quote Link to comment
Lignumaqua Posted March 31, 2021 Share Posted March 31, 2021 On 3/29/2021 at 11:59 PM, Lignumaqua said: Thanks, but I've tried that. In fact I deleted everything and started again. Still has this problem I'm afraid, the single quotes in these two error fields break the JavaScript 'Monitor Warning/Error' buttons. Version installed is 2021.03.24 FYI - I was able to fix this (well, mask it really, I didn't fix the root problem) by editing the two addWarning() strings in tests.php to remove the apostrophes, and deleting ignoreList.json again. The strings now read 'The unRaid built in FTP server is currently disabled, but users are defined' and 'The unRaid built in ftp server is currently running'. The buttons now work as expected. Any other error strings with apostrophes likely still have the same problem. Quote Link to comment
bombz Posted March 31, 2021 Share Posted March 31, 2021 6 hours ago, Squid said: You also have to reboot. If it reappears after that, then post your entire diagnostics file OK. I will let you know next time I cycle the array :-) Cheers! Quote Link to comment
CorneliousJD Posted April 1, 2021 Share Posted April 1, 2021 On 3/29/2021 at 12:41 PM, Squid said: If the error came up before the Update that fixed this (2021.03.14), then you need to delete ignoreList.json from /config/plugins/fix.common.problems on the flash drive Ok, so I came to post about this (FTP server running). I deleted the /boot/config/plugins/fix.common.problems/ignoreList.json file completely, rescanned and saw that error, ignored it, resacnned again and it's still showing up like this (listed both as an active one, and an ignored one) Version: 2021.03.30a Quote Link to comment
Lignumaqua Posted April 1, 2021 Share Posted April 1, 2021 3 hours ago, CorneliousJD said: Ok, so I came to post about this (FTP server running). I deleted the /boot/config/plugins/fix.common.problems/ignoreList.json file completely, rescanned and saw that error, ignored it, resacnned again and it's still showing up like this (listed both as an active one, and an ignored one) Version: 2021.03.30a Yes, see my post above. This had been working fine but broke when the single quotes were replaced with ' in mid March. Unfortunately some (all?) browsers treat this as a quote which breaks the Javascript. I had to edit the strings in tests.php to remove the apostrophes before I could get it to work. I'm sure Squid will post an update. Quote Link to comment
NAS Posted April 2, 2021 Share Posted April 2, 2021 Suggestion for Update Assistant part of Fix Common Problems. Check all users for any instances of screen running. Quote Link to comment
JonathanM Posted April 2, 2021 Share Posted April 2, 2021 34 minutes ago, NAS said: Suggestion for Update Assistant part of Fix Common Problems. Check all users for any instances of screen running. How would any user except root run screen? Quote Link to comment
Lignumaqua Posted April 2, 2021 Share Posted April 2, 2021 21 hours ago, Lignumaqua said: I'm sure Squid will post an update. And he has! 😃 Thanks Squid, all your hard work is much appreciated. Quote Link to comment
racingsquirrel Posted April 6, 2021 Share Posted April 6, 2021 I'm getting a template URL warning about my zigbee2mqtt docker. It seems that it is checking the opposite templates for the 2 available zigbee2mqtt images. As per the image below, the original one I was using is named zigbee2mqtt and was the image on selfhosters' repository. It is checking against digiblur's repository. This seems to be confirmed by reinstalling the selfhoster image as zigbee2mqtt_test and then the digiblur image as zigbee2mqtt_digiblur. Quote Link to comment
Squid Posted April 6, 2021 Author Share Posted April 6, 2021 16 minutes ago, racingsquirrel said: I'm getting a template URL warning about my zigbee2mqtt docker. It seems that it is checking the opposite templates for the 2 available zigbee2mqtt images. As per the image below, the original one I was using is named zigbee2mqtt and was the image on selfhosters' repository. It is checking against digiblur's repository. This seems to be confirmed by reinstalling the selfhoster image as zigbee2mqtt_test and then the digiblur image as zigbee2mqtt_digiblur. I know. Talking with the guys on which one of them to remove. 1 Quote Link to comment
grasfer Posted April 10, 2021 Share Posted April 10, 2021 Setting up of authorized keys possibly found in go file It is recommended to not set up authorized keys for you server via go, but rather like THIS THIS link links to a empty doc file https://wiki.unraid.net/Unraid_OS_6.9.0#SSH_Improvements Quote Link to comment
trurl Posted April 10, 2021 Share Posted April 10, 2021 4 hours ago, grasfer said: Setting up of authorized keys possibly found in go file It is recommended to not set up authorized keys for you server via go, but rather like THIS THIS link links to a empty doc file https://wiki.unraid.net/Unraid_OS_6.9.0#SSH_Improvements Moved here: https://wiki.unraid.net/Manual/Release_Notes/Unraid_OS_6.9.0#SSH_Improvements Quote Link to comment
Squid Posted April 10, 2021 Author Share Posted April 10, 2021 4 hours ago, trurl said: Moved here: https://wiki.unraid.net/Manual/Release_Notes/Unraid_OS_6.9.0#SSH_Improvements Fixed Also on today's update, a new warning will be issued under 2 circumstances: The string xmrig is found in your go file, or a process named xmrig is running. If it's found in your go file, then most likely your entire system has been compromised and a hacker has edited your go file to automatically install xmrig on every boot If it's a process, two scenarios exist You're purposely running it. In which case this warning is safe to ignore You've possibly installed a compromised container via a random dockerHub search that is masking the fact that it's installing xmrig as it's primary purpose. For reference, xmrig is mining software, and since malware, viruses, ransomware etc are now passe, Compromising a system to instead mine for bitcoin is the hack of choice. Quote Link to comment
Einsteinjr Posted April 11, 2021 Share Posted April 11, 2021 Long time user of this plugin and have run into an issue after updating to the latest UNRAID version (6.9.2). For some reason, the plugin thinks I have multiple NICs installed in my system and reports the following error: eth1 and eth2 both have IP addresses on the 192.168.3.0 network. This is rarely a valid configuration Neither eth1 or eth2 show up in ifconfig nor in the Settings page (just eth0). At one point, I did install a 10Gb NIC but have since removed it over a year ago. Not sure why the plugin would still think it's the case. Current plugin version: 2021.04.10 Quote Link to comment
Squid Posted April 11, 2021 Author Share Posted April 11, 2021 Create a new thread in general support and include your diagnostics Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.