jowi Posted May 18, 2018 Share Posted May 18, 2018 1 minute ago, Taddeusz said: I like the new Docker console option but it would be nice to make the shell it launches selectable. Most, if not all, Docker images I've had to go into have bash installed. Bash is much preferred to the bare "sh". +1 Quote Link to comment
bonienl Posted May 18, 2018 Share Posted May 18, 2018 3 minutes ago, Taddeusz said: I like the new Docker console option but it would be nice to make the shell it launches selectable. Most, if not all, Docker images I've had to go into have bash installed. Bash is much preferred to the bare "sh". Many containers do not have 'bash' included, while most do have 'sh' included. You can type 'bash' once the console is opened. Make a feature request to have this selectable by container. Quote Link to comment
perhansen Posted May 19, 2018 Share Posted May 19, 2018 Just updated my main server from 6.5.1 and my backup server from 6.5.2-rc2. Both went just fine. Thanks for all the hard work limetech and team has put in it. Its much appreciated. Sent from my iPhone using Tapatalk Quote Link to comment
witalit Posted May 20, 2018 Share Posted May 20, 2018 Thanks guys for all your hard work. Quote Link to comment
slade4g63 Posted May 22, 2018 Share Posted May 22, 2018 Any chance for Zfs array options soon? Quote Link to comment
JonathanM Posted May 22, 2018 Share Posted May 22, 2018 4 hours ago, slade4g63 said: Any chance for Zfs array options soon? No. There already exists a user created zfs plugin, the chances of native support are pretty much none at the moment. Quote Link to comment
Altheran Posted May 23, 2018 Share Posted May 23, 2018 On 5/16/2018 at 7:06 PM, PR. said: All updated ok, maybe this update will solve my random crashes!? Look at C-States in the BIOS, I had hard lockups (Physical hard reboot) then I disables C-States in my Bios, stable since. Quote Link to comment
fersal Posted May 25, 2018 Share Posted May 25, 2018 6.3.5 -> 6.5.2 looks good, so far no issues. Quote Link to comment
Matt_G Posted May 26, 2018 Share Posted May 26, 2018 On 5/22/2018 at 10:18 AM, slade4g63 said: Any chance for Zfs array options soon? Doubt that will ever happen as a native implementation. The Linux kernel is licensed under the GNU General Public License version 2. (GPL-2.0) OpenZFS is licensed under the Common Development and Distribution License. (CDDL) The two just aren't compatible with each other. Quote Link to comment
optiman Posted May 26, 2018 Share Posted May 26, 2018 (edited) Will the new LSI SAS 9400-16i sata card work with this new version of unraid? Drivers included or I would have to manually install them? update: nevermind, that card is not on the compatibility list. Will the LSI 9305-16i be supported soon? otherwise I will have to go with the LSI 9305-24i Edited May 26, 2018 by Switchblade Quote Link to comment
ClunkClunk Posted May 26, 2018 Share Posted May 26, 2018 6.5.2 has been great. I'm really enjoying the ability to drop in to a Docker container's shell right from the GUI. I didn't realize how useful that feature would be! Quote Link to comment
spl147 Posted May 26, 2018 Share Posted May 26, 2018 6.5.2 has been great. I'm really enjoying the ability to drop in to a Docker container's shell right from the GUI. I didn't realize how useful that feature would be!Only if it worked in safari, it would be nice yesSent from my iPhone using Tapatalk Pro Quote Link to comment
wgstarks Posted May 26, 2018 Share Posted May 26, 2018 21 minutes ago, spl147 said: Only if it worked in safari, it would be nice yes Sent from my iPhone using Tapatalk Pro We can always hope that Apple will fix Safari. Firefox works great in the meantime. Quote Link to comment
spl147 Posted May 26, 2018 Share Posted May 26, 2018 We can always hope that Apple will fix Safari. Firefox works great in the meantime.Yea.... im using the latest technology preview, still don’t workSent from my iPhone using Tapatalk Pro Quote Link to comment
JustinAiken Posted May 26, 2018 Share Posted May 26, 2018 Coming up on 5 days of uptime with 6.5.2, no issues so far Quote Link to comment
jowi Posted May 27, 2018 Share Posted May 27, 2018 No problems here, but i noticed that sometimes the array does not spin down. I've set it to 2 hours, but sometimes it just stays up. I'm not sure if this is 6.5.2 related or a common v6 issue? I did not had this problem with V5 (been running V6 for a month or so now). (inotifywait doesn't show any activity) Quote Link to comment
bitcore Posted May 27, 2018 Share Posted May 27, 2018 (edited) Hmm, could we get things like this to be a link to either the relevant page or a hashtag anchor of the configuration section? https://i.imgur.com/sxeCHgA.png (unraid screenshot after install) Upgrade appears to have gone smoothly for me. Thank you! Edited May 27, 2018 by bitcore Quote Link to comment
Tybio Posted May 27, 2018 Share Posted May 27, 2018 5 hours ago, jowi said: No problems here, but i noticed that sometimes the array does not spin down. I've set it to 2 hours, but sometimes it just stays up. I'm not sure if this is 6.5.2 related or a common v6 issue? I did not had this problem with V5 (been running V6 for a month or so now). (inotifywait doesn't show any activity) I've been fighting a similar problem, disks spinning up with no modification to files. I'm running cache_dirs and used to be able to have disks spun down for days/weeks. Now I've just given in and gone with it and have them all spinning all the time as they were in constant flux with no real activity. It would be VERY nice to have unraid it's self help out with tracking disk spin-up, as that is one of the primary reasons for unraid over traditional raid. It is very frustrating to troubleshoot this, and with Docker & VMs being more a core offering...the "It's the addons" line is holding less and less water :). To be clear, I'm not upset or angry, just poking fun. I'm a huge fan of unraid and have used it for over 8 and will continue to use it...would just like some more help in this area from the devs as even an advanced user can't track what reads are spinning up disks so we can trace them back. Is it a cache miss on a directory list? Is it an inspection of a file? I know this is complex stuff, and I'm not asking for an easy button....but right now, my toolbox is empty on how to address this. 1 Quote Link to comment
michael123 Posted May 27, 2018 Share Posted May 27, 2018 23 hours ago, Switchblade said: Will the new LSI SAS 9400-16i sata card work with this new version of unraid? Drivers included or I would have to manually install them? update: nevermind, that card is not on the compatibility list. Will the LSI 9305-16i be supported soon? otherwise I will have to go with the LSI 9305-24i I believe it was said here it is supported, but I went with the Adaptec 1000 2288400-R (1000-16i ) Quote Link to comment
ovcrash Posted May 28, 2018 Share Posted May 28, 2018 On 5/26/2018 at 12:52 PM, spl147 said: Only if it worked in safari, it would be nice yes Sent from my iPhone using Tapatalk Pro I have a mac with Safari and it works fine. I have Safari 11.1 on macOS 10.13.4 (High Sierra). Quote Link to comment
wgstarks Posted May 28, 2018 Share Posted May 28, 2018 2 hours ago, ovcrash said: I have a mac with Safari and it works fine. I have Safari 11.1 on macOS 10.13.4 (High Sierra). My guess, you don't have SSH enabled in settings>identification. It's my understanding that Safari doesn't handle web sockets properly on secure web pages. Quote Link to comment
spl147 Posted May 28, 2018 Share Posted May 28, 2018 I have a mac with Safari and it works fine. I have Safari 11.1 on macOS 10.13.4 (High Sierra).Is your webgui password protected? It works fine on mine to without a passwordSent from my iPhone using Tapatalk Pro Quote Link to comment
CRD Posted May 28, 2018 Share Posted May 28, 2018 Upgraded with no major issues from 6.3.x, my preclear plugin no longer works. Will check out the preclear thread. Thank you all for the hard work. Quote Link to comment
Hoopster Posted May 28, 2018 Share Posted May 28, 2018 2 hours ago, CRD said: Upgraded with no major issues from 6.3.x, my preclear plugin no longer works. Will check out the preclear thread. Thank you all for the hard work. There are issues with the preclear plugin and the latest versions of unRAID. It is highly recommended that you remove the preclear plugin. See the post below for recommendations for upgrading from 6.3.x to 6.5.x. Note in particular this line from the Before you upgrade from 6.3.5 section. - You must uninstall Advanced Buttons (see this) and the Preclear plugin (see this, this, this, this, this, this). Consider uninstalling unmenu (see this), the Pipework docker (see this), and any other plugins you no longer use. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.