WannabeMKII Posted February 19, 2018 Share Posted February 19, 2018 Over the weekend, I changed from a Xeon Windows machine running Plex and an N54L running unraid with the data, to moving everything to unraid on the Xeon. All generally went smoothly, but Plex seems to be using quite a bit of CPU. I've taken screenshots of what I can find and hoping someone can offer a bit of guidance on what is causing this? I see the scanner run periodically to increase CPU usage, but then drops when done. Also, when Plex isn't using that much CPU, the CPU generally sits about 2%. Any ideas? Quote Link to comment
WannabeMKII Posted February 19, 2018 Share Posted February 19, 2018 As an additional screenshot, I restarted the Plex docker at 12:34 and this is the outcome. Quote Link to comment
deusxanime Posted February 20, 2018 Share Posted February 20, 2018 Did a recent container upgrade also update or upgrade python or maybe something else? I use a Plex agent & scanner plug-in for anime (ASS/HAMA) that is written in python and suddenly it stopped working correctly. I have not changed/updated the plug-in for months, so there shouldn't have been any changes to the plug-in code itself. One thing it does is pull down an xml from github and now that part is throwing an error as of yesterday. Creating: /tmp/anime-list-corrections.xml Error downloading ScudLee's file mod from local/GitHub 'http://rawgit.com/Dingmatt/AMSA/master/Plug-in%20Support/Data/com.plexapp.agents.amsa/DataItems/anime-list-corrections.xml', Exception: '<urlopen error [SSL: CERTIFICATE_VERIFY_FAILED] certificate verify failed (_ssl.c:590)>' Creating: /tmp/ASS-tmp-anime-list-master.xml Error parsing ScudLee's file mod content, Exception: '<urlopen error [SSL: CERTIFICATE_VERIFY_FAILED] certificate verify failed (_ssl.c:590)>' I've dug through the code/py file some and it is using urlopen(URL).read() to try to grab the xml file. The creator isn't sure the cause, so trying to cover all bases to see where it stems from. Plex forums link in case there is any interest. Quote Link to comment
clowrym Posted February 20, 2018 Share Posted February 20, 2018 On 2/16/2018 at 9:06 PM, aptalca said: According to the log, the server is up and running. Check your connection and/or the plex media server log in the config folder interestingly enough, I had switched back to the plex official docker, which worked fine. After reading your post & switched back with no issues. Going to test a couple server reboots and see if the issue persists. Quote Link to comment
Jobine Posted February 21, 2018 Share Posted February 21, 2018 Hi, I installed the Plex version of Limewire. how can I replace it with the one of LinuxServer without loosing my database ? Thank, Quote Link to comment
trurl Posted February 21, 2018 Share Posted February 21, 2018 22 minutes ago, Jobine said: Hi, I installed the Plex version of Limewire. how can I replace it with the one of LinuxServer without loosing my database ? Thank, Might be useful to backup your plex appdata. Then, In the Dashboard, click on the docker, select Edit, and change the Repository to linuxserver/plex Quote Link to comment
Jobine Posted February 21, 2018 Share Posted February 21, 2018 What's the version of linuxserver/Plex ? Version 1.11.3.4803 ? Thank, Quote Link to comment
saarg Posted February 21, 2018 Share Posted February 21, 2018 The latest available after you restart the container as it fetches updates on restart. Quote Link to comment
Jobine Posted February 21, 2018 Share Posted February 21, 2018 Are you sure, because following the installation, I'm in version 1.10.1.4602 and they tell me to update. Quote Link to comment
trurl Posted February 21, 2018 Share Posted February 21, 2018 11 minutes ago, Jobine said: Are you sure, because following the installation, I'm in version 1.10.1.4602 and they tell me to update. Post your docker run Quote Link to comment
H2O_King89 Posted February 22, 2018 Share Posted February 22, 2018 Are we going to be able to use dedicated gpus soon? Sent from my iPhone using Tapatalk Pro Quote Link to comment
saarg Posted February 22, 2018 Share Posted February 22, 2018 5 hours ago, H2O_King89 said: Are we going to be able to use dedicated gpus soon? Sent from my iPhone using Tapatalk Pro Ask Plex. Quote Link to comment
sch1308 Posted February 22, 2018 Share Posted February 22, 2018 My plex seems to be on a loop and never loads the webui, I have included diagnostics for unraid and the logs from plex. unraid-diagnostics-20180222-1809.zip Plex Media Server.log Quote Link to comment
aptalca Posted February 23, 2018 Share Posted February 23, 2018 2 hours ago, sch1308 said: My plex seems to be on a loop and never loads the webui, I have included diagnostics for unraid and the logs from plex. unraid-diagnostics-20180222-1809.zip Plex Media Server.log You have a corrupt database. Google how to restore plex database from a backup. You may have an app (like plexemail) that connects to the plex database, or maybe you accessed the plex database with an sqlite editor while plex was running and the database got corrupted. Quote Link to comment
boianski Posted February 23, 2018 Share Posted February 23, 2018 I would like your guys input on what I suspect is a simple fix, total noob here. I am trying to set an unassigned device in this case a SSD, to serve as my music drive for my Plex server. I am not able to find the drive path within Plex and I am unsure how to fix it.. I have attached pics of my settings, please if anyone could help it would be tremendous. Quote Link to comment
wgstarks Posted February 23, 2018 Share Posted February 23, 2018 (edited) 15 minutes ago, boianski said: I would like your guys input on what I suspect is a simple fix Looks like you didn’t set a container path when you set the path to your music share. Just click the edit button for that path and add a container path something like /music. Then you will see /music within the app. Also make sure you set the path as RW Slave. Edited February 23, 2018 by wgstarks Quote Link to comment
boianski Posted February 23, 2018 Share Posted February 23, 2018 (edited) 7 minutes ago, wgstarks said: Looks like you didn’t set a container path when you set the path to your music share. Just click the edit button for that path and add a container path something like /music. Then you will see /music within the app. Also make sure you set the path as RW Slave. :facepalm thank you Edited February 23, 2018 by boianski Quote Link to comment
H2O_King89 Posted February 23, 2018 Share Posted February 23, 2018 On 2/22/2018 at 12:56 AM, saarg said: Ask Plex. plex can but it's something with unraid? drivers? Quote Link to comment
trurl Posted February 23, 2018 Share Posted February 23, 2018 5 hours ago, H2O_King89 said: plex can but it's something with unraid? drivers? Is this what your looking for? Quote Link to comment
Hoopster Posted February 23, 2018 Share Posted February 23, 2018 (edited) 2 hours ago, trurl said: Is this what your looking for? I believe @H2O_King89 wants to know if/when discrete graphics cards may be supported for transcoding in Linux/unRAID/Plex docker. The instructions I provided in the post you referenced deal with enabling a CPU-Integrated graphics processor with Quick Sync Video support for transcoding purposes. On some systems a discrete NVIDIA GPU can be used for hardware encoding, but, not on unRAID/Plex docker. The Plex "Using Hardware-Accelerated Streaming" page says this about decoding: On Linux, hardware-accelerated decoding is not supported on NVIDIA GPUs. Intel Quick Sync is required for hardware-accelerated decoding. And this about encoding: Windows and Linux devices using NVIDIA GeForce graphic cards are limited to hardware-accelerated encoding of 2 videos at a time. This is a driver limitation from NVIDIA. This would seem to indicate that encoding with an NVIDIA GPU is possible on Linux, but, it does not work in unRAID/Plex docker. Edited February 23, 2018 by Hoopster 1 Quote Link to comment
CHBMB Posted February 23, 2018 Share Posted February 23, 2018 That's probably because there's no native drivers for Geforce in unRAID. Only way I can see it even being possible is to do something like I do with the DVB builds and recompile unRAID with Nvidea drivers included. Quote Link to comment
H2O_King89 Posted February 24, 2018 Share Posted February 24, 2018 yup my 4930K can't transcode 4k and would like to my extra 980. Looking hard at upgrading to AMD 7551P if discrete support doesn't come. Quote Link to comment
ffhelllskjdje Posted February 25, 2018 Share Posted February 25, 2018 (edited) I'm Getting a "Conversion failed. Transcoder crashed or failed to start up" error. The file is just a mkv movie But...only on the my Apple TV 4k, if I play the same file in the plex app on my Mac it works fine, if I play the same file on my iphone it plays fine. It's only the appletv that is not working, anyone know whats up with that? Edited February 25, 2018 by ffhelllskjdje Quote Link to comment
WannabeMKII Posted March 1, 2018 Share Posted March 1, 2018 On 19/02/2018 at 12:17 PM, WannabeMKII said: Over the weekend, I changed from a Xeon Windows machine running Plex and an N54L running unraid with the data, to moving everything to unraid on the Xeon. All generally went smoothly, but Plex seems to be using quite a bit of CPU. I've taken screenshots of what I can find and hoping someone can offer a bit of guidance on what is causing this? I see the scanner run periodically to increase CPU usage, but then drops when done. Also, when Plex isn't using that much CPU, the CPU generally sits about 2%. Any ideas? Is anyone able to help with this, as it still appears to be happening? Quote Link to comment
guyonphone Posted March 3, 2018 Share Posted March 3, 2018 (edited) Hello, I am interested in using "Lock for Plex" https://forestfirefly.github.io/lockforplex/ I have installed the plugin but I get errors during the installation of the install.sh script because the docker doesn't seem to be to keen on the use of sudo. I tried removing the sudo commands from the install.sh script, but that didn't seem to resolve the issue either. The plugin is available in plex but the locking just doesn't appear to work. Additionally the file wants to restart the service "plexmediaserver" but that doesn't appear to work inside the docker, as it appears some other modification was made, and I don't know enough linux to determine what that is. Here is the contents of the install.sh script I am trying to run. #!/bin/bash # Init FILE="/tmp/out.$$" GREP="/bin/grep" #.... # Make sure only root can run our script if [[ $EUID -ne 0 ]]; then echo "This script must be run as root" 1>&2 exit 1 fi cd "/config/Library/Application Support/Plex Media Server/Plug-ins" sudo chown -R plex:plex Lock_for_Plex.bundle cd "/config/Library/Application Support/Plex Media Server/Plug-ins/Lock_for_Plex.bundle/Contents/Resources/lock_support/" sudo a+x lock.sh sudo a+x unlock.sh sudo a+x sqlite3 service plexmediaserver restart Any help is appreciated. Edited March 3, 2018 by guyonphone Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.