Vr2Io Posted October 1, 2018 Share Posted October 1, 2018 18 minutes ago, Can0nfan said: I think I finally figured out the issue here @limetech on my server 'unRAIDPro' that this user/ permissions issue was happening on. my setup that i had this issue on was unRAIDPlus VM with NFS mounts to unRAIDPro's /mnt/user/Media unRAIDPlus unassigned devices SMB mount to unRAIDPro /mnt/user/Media I unmounted the SMB from unassigned devices and mounted as NFS and I have a solid 6 hours of uptime (previous record was 2hrs 45min before the user folder permissions issue) never had an issue access same share via SMB and NFS prior to 6.6 so looks like a new bug I will submit it as a bug report Seems good, I haven't NFS issue, my NFS share point exactly no SMB share enable. Quote Link to comment
Can0n Posted October 1, 2018 Share Posted October 1, 2018 (edited) 8 minutes ago, Benson said: Seems good, I haven't NFS issue, my NFS share point exactly no SMB share enable. yeah looks like others have found NFS itself is crashing. remove any SMB shares from unassigned devices if there is also a NFS mount to same share i have to use SMB as NFS doesnt run well on all my clients. SMB does for those that NFS doesnt Edited October 1, 2018 by Can0nfan update info Quote Link to comment
Vr2Io Posted October 1, 2018 Share Posted October 1, 2018 5 minutes ago, Can0nfan said: yeah looks like others have found NFS itself is crashing. looks like under Settings->NFS and setting Tunable (fuse_remember): to 0 should alleviate the issue but also remove any SMB shares from unassigned devices if there is also a NFS mount to same share Thsoe are Unraid user/disk share, not sure have different or not FYR. Quote Link to comment
Can0n Posted October 1, 2018 Share Posted October 1, 2018 4 hours ago, Benson said: Thsoe are Unraid user/disk share, not sure have different or not FYR. @limetech NFS is still crashing.....lasted 11hrs this time this is killing the user folder for some reason....i hope you and the team can find out whats causing this and get it fixed ASAP its very annoying Sep 30 23:23:56 Thor kernel: ------------[ cut here ]------------Sep 30 23:23:56 Thor kernel: nfsd: non-standard errno: -103 Sep 30 23:23:56 Thor kernel: WARNING: CPU: 1 PID: 6507 at fs/nfsd/nfsproc.c:817 nfserrno+0x44/0x4a [nfsd] Sep 30 23:23:56 Thor kernel: Modules linked in: xt_nat macvlan xt_CHECKSUM iptable_mangle ipt_REJECT ebtable_filter ebtables ip6table_filter ip6_tables vhost_net tun vhost tap ipt_MASQUERADE iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 iptable_filter ip_tables nf_nat arc4 ecb md4 sha512_ssse3 sha512_generic cmac cifs ccm xfs nfsd lockd grace sunrpc md_mod i915 i2c_algo_bit iosf_mbi drm_kms_helper drm intel_gtt agpgart syscopyarea sysfillrect sysimgblt fb_sys_fops x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel pcbc aesni_intel aes_x86_64 crypto_simd cryptd mpt3sas glue_helper alx intel_cstate intel_uncore intel_rapl_perf ahci raid_class libahci scsi_transport_sas mxm_wmi i2c_i801 mdio i2c_core video wmi mlx4_core backlight thermal Sep 30 23:23:56 Thor kernel: button acpi_pad pcc_cpufreq fan Sep 30 23:23:56 Thor kernel: CPU: 1 PID: 6507 Comm: nfsd Not tainted 4.18.10-unRAID #2 Sep 30 23:23:56 Thor kernel: Hardware name: MSI MS-7978/H170 GAMING M3 (MS-7978), BIOS C.B0 01/25/2018 Sep 30 23:23:56 Thor kernel: RIP: 0010:nfserrno+0x44/0x4a [nfsd] Sep 30 23:23:56 Thor kernel: Code: c0 48 83 f8 22 75 e2 80 3d b3 06 01 00 00 bb 00 00 00 05 75 17 89 fe 48 c7 c7 3b 9a 47 a0 c6 05 9c 06 01 00 01 e8 3b ed bd e0 <0f> 0b 89 d8 5b c3 48 83 ec 18 31 c9 ba ff 07 00 00 65 48 8b 04 25 Sep 30 23:23:56 Thor kernel: RSP: 0018:ffffc9000377bdc0 EFLAGS: 00010282 Sep 30 23:23:56 Thor kernel: RAX: 0000000000000000 RBX: 0000000005000000 RCX: 0000000000000007 Sep 30 23:23:56 Thor kernel: RDX: 0000000000000000 RSI: ffff88086dc56470 RDI: ffff88086dc56470 Sep 30 23:23:56 Thor kernel: RBP: ffffc9000377be10 R08: 0000000000000003 R09: ffffffff8220d400 Sep 30 23:23:56 Thor kernel: R10: 0000000000000445 R11: 0000000000015a7c R12: ffff880845a49c08 Sep 30 23:23:56 Thor kernel: R13: 000000001373b000 R14: ffff880845a49d68 R15: 0000000000000005 Sep 30 23:23:56 Thor kernel: FS: 0000000000000000(0000) GS:ffff88086dc40000(0000) knlGS:0000000000000000 Sep 30 23:23:56 Thor kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 Sep 30 23:23:56 Thor kernel: CR2: 000055d8c34aa2f8 CR3: 0000000001e0a002 CR4: 00000000003626e0 Sep 30 23:23:56 Thor kernel: DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 Sep 30 23:23:56 Thor kernel: DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Sep 30 23:23:56 Thor kernel: Call Trace: Sep 30 23:23:56 Thor kernel: nfsd_open+0x15e/0x17c [nfsd] Sep 30 23:23:56 Thor kernel: nfsd_read+0x45/0xec [nfsd] Sep 30 23:23:56 Thor kernel: nfsd3_proc_read+0x95/0xda [nfsd] Sep 30 23:23:56 Thor kernel: nfsd_dispatch+0xb4/0x169 [nfsd] Sep 30 23:23:56 Thor kernel: svc_process+0x4b5/0x666 [sunrpc] Sep 30 23:23:56 Thor kernel: ? nfsd_destroy+0x48/0x48 [nfsd] Sep 30 23:23:56 Thor kernel: nfsd+0xeb/0x142 [nfsd] Sep 30 23:23:56 Thor kernel: kthread+0x10b/0x113 Sep 30 23:23:56 Thor kernel: ? kthread_flush_work_fn+0x9/0x9 Sep 30 23:23:56 Thor kernel: ret_from_fork+0x35/0x40 Sep 30 23:23:56 Thor kernel: ---[ end trace cd5759a6b02d0b74 ]--- Sep 30 23:44:16 Thor sshd[22182]: SSH: Server;Ltype: Version;Remote: 10.0.0.10-65250;Protocol: 2.0;Client: OpenSSH_7.7 Sep 30 23:44:16 Thor sshd[22182]: SSH: Server;Ltype: Kex;Remote: 10.0.0.10-65250;Enc: [email protected];MAC: <implicit>;Comp: none [preauth] Sep 30 23:44:16 Thor sshd[22182]: SSH: Server;Ltype: Authname;Remote: 10.0.0.10-65250;Name: root [preauth] Sep 30 23:44:20 Thor sshd[22182]: Accepted password for root from 10.0.0.10 port 65250 ssh2 Sep 30 23:46:53 Thor emhttpd: req (7): startState=STARTED&cmdStop=Stop&csrf_token=****************&csrf_token=**************** Sep 30 23:46:53 Thor emhttpd: Spinning up all drives... Sep 30 23:46:53 Thor emhttpd: shcmd (151): /usr/sbin/hdparm -S0 /dev/sdo Sep 30 23:46:53 Thor kernel: mdcmd (48): nocheck Sep 30 23:46:53 Thor kernel: md: nocheck_array: check not active Sep 30 23:46:53 Thor kernel: mdcmd (49): spinup 0 Sep 30 23:46:53 Thor kernel: mdcmd (50): spinup 1 Sep 30 23:46:53 Thor kernel: mdcmd (51): spinup 2 Sep 30 23:46:53 Thor kernel: mdcmd (52): spinup 3 Sep 30 23:46:53 Thor kernel: mdcmd (53): spinup 4 Sep 30 23:46:53 Thor kernel: mdcmd (54): spinup 5 Sep 30 23:46:53 Thor kernel: mdcmd (55): spinup 6 Sep 30 23:46:53 Thor kernel: mdcmd (56): spinup 7 Sep 30 23:46:53 Thor kernel: mdcmd (57): spinup 8 Sep 30 23:46:53 Thor kernel: mdcmd (58): spinup 9 Sep 30 23:46:53 Thor kernel: mdcmd (59): spinup 10 Sep 30 23:46:53 Thor kernel: mdcmd (60): spinup 29 Sep 30 23:46:53 Thor root: Sep 30 23:46:53 Thor root: /dev/sdo: Sep 30 23:46:53 Thor root: setting standby to 0 (off) Sep 30 23:46:53 Thor emhttpd: shcmd (152): /usr/sbin/hdparm -S0 /dev/sdn Sep 30 23:46:53 Thor root: Sep 30 23:46:53 Thor root: /dev/sdn: Sep 30 23:46:53 Thor root: setting standby to 0 (off) Sep 30 23:46:54 Thor emhttpd: Stopping services... Sep 30 23:46:54 Thor emhttpd: shcmd (154): /etc/rc.d/rc.libvirt stop Sep 30 23:46:54 Thor root: Domain e04658c0-5265-ce54-594e-60ed11278970 is being shutdown Sep 30 23:46:54 Thor root: Quote Link to comment
WonkoTheSane Posted October 1, 2018 Share Posted October 1, 2018 +1 for NFS issues since 6.6.0 See my post here: Quote Link to comment
kizer Posted October 2, 2018 Share Posted October 2, 2018 Not sure what happened, but went from 6.6 rc1 to 6.6.1 and it totally blew out my SSD drive. I had corruption errors out the gazoooo and many many many Read-only messages when I attempted to delete files. Luckily I was able to simply unassigned my SSD drive, fire up Unassigned Devices, format my drive to BTRS then bring it back online. I re-loaded a previous backup from Squids Backup/Restore app and did some App installing to get back to where I was. Normally on every update I manually shutdown all my dockers and then shut down the array then simply hit reboot or shutdown and watch the screen as it comes up. I'm guessing maybe the docker hung and went crazy on my files. I didn't save any logs or pull a diagnostic file. However who knows what happened, but just want others to know shut things down and play it smart and back things up before leaping each time. Quote Link to comment
Harro Posted October 2, 2018 Share Posted October 2, 2018 Installed 6.6.1 no problems but I have my parity check set for once a year on the 1st. I set this because I had been adding larger drives the last few months and just rebuilding drives. My last drive rebuild was done on Sept. 29th and once Oct. 1st came I noticed I was doing a parity check and yet the schedule still has my check at Jan. 1st. No big deal but don't want to torture my drives any more than necessary. Just thought I would add this to the thread and see if any one else has had this happen. 1 Quote Link to comment
KernelG Posted October 3, 2018 Share Posted October 3, 2018 (edited) Another unscheduled parity check here w/6.6.1. I have it set Custom: 07:00, Wednesday of the first week in Mar, Jun, Sep, and Dec. It started up this morning at 7, which is all correct except for the month. I toggled a couple of the variables and re-Apply'd. (EDIT: I changed the time to 10:00, saved, and it just started up again at 10 even though it's still the wrong month. So it doesn't seem to be a saved data format issue.) Aside from this, it's been very smooth sailing. The new UI looks great on a color calibrated display. Edited October 3, 2018 by KernelG Quote Link to comment
Ryonez Posted October 3, 2018 Share Posted October 3, 2018 Can't see it in this release, but can we have this hot-fix merged with the next release please? Docker sometimes erroneously pick up extra parameters as a possible "Bash command execution or redirection", and prevents it from starting. The hotfix Squid wrote corrects it. Quote Link to comment
Squid Posted October 3, 2018 Share Posted October 3, 2018 29 minutes ago, Ryonez said: Can't see it in this release, but can we have this hot-fix merged with the next release please? Already is merged Quote Link to comment
Ryonez Posted October 3, 2018 Share Posted October 3, 2018 Just now, Squid said: Already is merged Oh, sorry, didn't see it in the update notes. Is it in 6.6.1, or should I wait for the next release? Quote Link to comment
Squid Posted October 3, 2018 Share Posted October 3, 2018 1 minute ago, Ryonez said: Oh, sorry, didn't see it in the update notes. Is it in 6.6.1, or should I wait for the next release? 6.6.2 (or whatever the next release is named) Quote Link to comment
Ryonez Posted October 3, 2018 Share Posted October 3, 2018 Just now, Squid said: 6.6.2 (or whatever the next release is named) Gotcha, thank you very much. Quote Link to comment
jpowell8672 Posted October 4, 2018 Share Posted October 4, 2018 (edited) Updated from 6.6 rc4 to 6.6.1 no problem. I have noticed a text problem on the upper top right where it say's "Uptime x minutes" the bottom 1/3rd is covered so you can't see it. Also on the Dashboard Apps section the second line of text on any apps that have more than one line is cutoff about 1/3rd on the bottom of second line of text. My monitor resolution is 4k. Thanks for all your hard work guy's! Edited October 4, 2018 by jpowell8672 Added another fix needed Quote Link to comment
Symon Posted October 4, 2018 Share Posted October 4, 2018 As a Threadripper (1950) user, the update went through without any issues but according to CPU-Z in Windows 10, my CPU performance in the VM went significantly down. I opened an seprate topic for this as may just misconfigured something... Quote Link to comment
wdelarme Posted October 4, 2018 Share Posted October 4, 2018 On 9/28/2018 at 11:10 AM, limetech said: If there's an issue with some basic functionality which worked in previous release but does not work in current release, please post a Bug Report. I had this issue but just changed to intel nic from realtek and everything works fine now Quote Link to comment
Tophicles Posted October 5, 2018 Share Posted October 5, 2018 I also had the NFS issue. Rolled back to 6.5.3 for now. Swanky GUI changes though! :) Quote Link to comment
archedraft Posted October 5, 2018 Share Posted October 5, 2018 Updated my server last week from 6.5. Everything is functioning as it was before (server, dockers and VMs). Thanks! P.S. loving the new look! Quote Link to comment
ixnu Posted October 6, 2018 Share Posted October 6, 2018 I had the NFS issue too. My SMB and NFS shares disappeared after 4 days. I had friends over to watch a movie and quickly rebooted and did not save logs. Rolled back to 6.5.3 Quote Link to comment
sarf Posted October 6, 2018 Share Posted October 6, 2018 Hi all, any one having issues shutting down VM's? They simply hang and never complete. The only way to shut them down is to force stop. I had to roll back to 6.5.3 unfortunately... Quote Link to comment
MadeOfCard Posted October 6, 2018 Share Posted October 6, 2018 Is there any way to contribute to the front end? I would love to make this responsive. Sent from my iPhone using Tapatalk 2 Quote Link to comment
Dazog Posted October 6, 2018 Share Posted October 6, 2018 2 hours ago, MadeOfCard said: Is there any way to contribute to the front end? I would love to make this responsive. Sent from my iPhone using Tapatalk I would submit pull requests here: https://github.com/limetech/webgui See if they want to use em 2 Quote Link to comment
eybox Posted October 9, 2018 Share Posted October 9, 2018 On 10/6/2018 at 11:20 PM, MadeOfCard said: Is there any way to contribute to the front end? I would love to make this responsive. Sent from my iPhone using Tapatalk yeah, I was asking myself the same thing a while back.... I would love to contribute to this btw, updated my server yesterday from 6.6. Everything is functioning as it was before (server, dockers, VMs, etc). Thanks! Quote Link to comment
majorspawn Posted October 10, 2018 Share Posted October 10, 2018 is there any way to revert to the old gui look? im so use to the old one..... Quote Link to comment
itimpi Posted October 10, 2018 Share Posted October 10, 2018 52 minutes ago, majorspawn said: is there any way to revert to the old gui look? im so use to the old one..... Not unless you want to revert to the previous Unraid release? you might want to check out the different themes? The Azure one for instance is closer to the old style. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.