Michelle Bausager Posted March 28, 2021 Share Posted March 28, 2021 (edited) Quick and maybe a stupid question. I just migrated from Binhex-Plex to Linuxserver.io, because of hardware transcoding. I know Binhex has one for plexpass, for HW-transcoding, as far as I know. But that just confuses me & SpaceinvaderOne made a video using linuxservers docker, so for me, is was a good place to start. But my question is, does the hardware transcode option only visible if you have a PlexPass? I can se my options for transcoding is different from the one he(SpaceinvaderOne) has in his video, using the same docker. Or have I made a mistake when I migrated? Edit: Nvm, it all looks fine, except the settings. But when I press play nothing happens. It's seems a mistake have been made :E Edited March 28, 2021 by Michelle Bausager Quote Link to comment
ConnerVT Posted March 28, 2021 Share Posted March 28, 2021 The Plex application requires a PlexPass to enable HW transcoding, regardless of what platform you are using. Quote Link to comment
Michelle Bausager Posted March 28, 2021 Share Posted March 28, 2021 (edited) 30 minutes ago, ConnerVT said: The Plex application requires a PlexPass to enable HW transcoding, regardless of what platform you are using. Yes, but I would like to see the grayed-option before I buy. My question boils down to; is it greyed-out or not visible before the purchase? Edit: It's not visible. Now to figure out why the migration didn't work :E Edited March 28, 2021 by Michelle Bausager New Info Quote Link to comment
ConnerVT Posted March 28, 2021 Share Posted March 28, 2021 Unsure - Been a long time since before I bought my PlexPass. A good question to ask on the Plex support forum, as it is an issue with the Plex application itself. 1 Quote Link to comment
Schicksal Posted March 28, 2021 Share Posted March 28, 2021 Hi, i have one question. Is it possible to delete the ports for DLNA of this docker without any issue, if i don‘t uses DLNA? Or is it also used for something internal? i need the 1900 for something else. Quote Link to comment
Yekul Posted March 28, 2021 Share Posted March 28, 2021 Hrm, anyone else having issues HW transcoding 4k HEVC HDR content? My 4K HEVC content is hardware transcoding perfectly on my intel 10400, but throw HDR into the mix and it just reverts back to software. I have the HDR tone mapping option enabled of course. Quote Link to comment
Yekul Posted March 28, 2021 Share Posted March 28, 2021 26 minutes ago, coblck said: Fine with my i5 7400 Yeah suspecting it may be an issue with 10000 series? I dunno, have to spend some time getting logs for it I guess. Could have sworn I was watching a video file with it transcoding perfectly fine just the other day though, wonder if I can downgrade easily from latest version to test that theory... Quote Link to comment
coblck Posted March 28, 2021 Share Posted March 28, 2021 Did notice there is an update on my docker waiting but not updated yet maybe be worth rolling back see if OK Quote Link to comment
Yekul Posted March 28, 2021 Share Posted March 28, 2021 12 minutes ago, coblck said: Did notice there is an update on my docker waiting but not updated yet maybe be worth rolling back see if OK Hrm thought this would be easy, but can't find a place anywhere in the linuxserver.io package to enter the tag so guessing I need to manually add it as a new variable, anyone more knowledgeable than myself mind sharing how to set the specific tag to use please? Quote Link to comment
Yekul Posted March 28, 2021 Share Posted March 28, 2021 Nevermind figured it out! And indeed, everything is working perfectly again on the older image. I swapped back to 'version-1.22.0.4163-d8c4875dd' with linuxserver.io image and that did the trick for me. Unsure if it's just me, but might be worth mentioning to save some people headaches should it be an actual issue. Quote Link to comment
Arcaeus Posted April 1, 2021 Share Posted April 1, 2021 Hello all, posting here if anyone else runs into this issue. Saw there was an update to Unraid 6.9.1 this morning. Update installed with no issue and restarted my server. On reboot, my Plex container was not started (should be auto-start). When I went to start it, it just gave me the "execution error: bad parameter" error. I tried editing the docker settings, and when I went back to the Docker tab, Plex was gone. This was odd as it was working perfectly last night. I tried to add the container again from my previous image but kept getting this error: I searched for "nvidia driver" and installed this one as it seemed like the previous "Unraid Nvidia" plugin that I had downloaded before wasn't there anymore (see screenshot). Once that finished installing, I re-added the container from my previous image and it fired up no problem. Hope this helps. Quote Link to comment
Taddeusz Posted April 1, 2021 Share Posted April 1, 2021 I updated to the latest version today after I was notified by Plex that a new "everyone" version was available. Now when I go to settings I get the error "server settings are unavailable". I followed the instructions and deleted the login information from my Preferences.xml file. But then it wouldn't let me claim my server. Rather than going to the login it just says "server settings are unavailable". I was finally able to log my server back in by using the PLEX_CLAIM Docker variable. It still won't let me get to my settings though. Any ideas? Quote Link to comment
resuarez Posted April 1, 2021 Share Posted April 1, 2021 29 minutes ago, Taddeusz said: I updated to the latest version today after I was notified by Plex that a new "everyone" version was available. Now when I go to settings I get the error "server settings are unavailable". I followed the instructions and deleted the login information from my Preferences.xml file. But then it wouldn't let me claim my server. Rather than going to the login it just says "server settings are unavailable". I was finally able to log my server back in by using the PLEX_CLAIM Docker variable. It still won't let me get to my settings though. Any ideas? I am having the same problem Checking the logs, I get: Plex Plug-in [com.plexapp.system]: error while loading shared libraries: libpython2.7.so.1.0: cannot open shared object file: No such file or directory Plex Plug-in [com.plexapp.system]: error while loading shared libraries: libpython2.7.so.1.0: cannot open shared object file: No such file or directory /usr/lib/plexmediaserver/Plex Relay: error while loading shared libraries: libcurl.so: cannot open shared object file: No such file or directory Quote Link to comment
Octa Posted April 1, 2021 Share Posted April 1, 2021 29 minutes ago, resuarez said: I am having the same problem Checking the logs, I get: Plex Plug-in [com.plexapp.system]: error while loading shared libraries: libpython2.7.so.1.0: cannot open shared object file: No such file or directory Plex Plug-in [com.plexapp.system]: error while loading shared libraries: libpython2.7.so.1.0: cannot open shared object file: No such file or directory /usr/lib/plexmediaserver/Plex Relay: error while loading shared libraries: libcurl.so: cannot open shared object file: No such file or directory Exactly the same issue here Quote Link to comment
wgstarks Posted April 1, 2021 Share Posted April 1, 2021 1 hour ago, Taddeusz said: I updated to the latest version today after I was notified by Plex that a new "everyone" version was available. What version is it? Just want to make sure i don't do the same. Quote Link to comment
Frostbite2600 Posted April 1, 2021 Share Posted April 1, 2021 42 minutes ago, resuarez said: I am having the same problem Checking the logs, I get: Plex Plug-in [com.plexapp.system]: error while loading shared libraries: libpython2.7.so.1.0: cannot open shared object file: No such file or directory Plex Plug-in [com.plexapp.system]: error while loading shared libraries: libpython2.7.so.1.0: cannot open shared object file: No such file or directory /usr/lib/plexmediaserver/Plex Relay: error while loading shared libraries: libcurl.so: cannot open shared object file: No such file or directory Same issue here, running latest version of UnRaid and Plex. Same exact errors in the logs, cannot access Plex remotely or access the server settings. Only local network users are able to play files from Plex. Quote Link to comment
Taddeusz Posted April 1, 2021 Share Posted April 1, 2021 4 minutes ago, wgstarks said: What version is it? Just want to make sure i don't do the same. I have no idea. I was going in to verify the new version number but can’t see it because of this issue. Quote Link to comment
Octa Posted April 1, 2021 Share Posted April 1, 2021 Well it seems its a Plex issue rather than linuxserver.io, see here https://forums.plex.tv/t/server-settings-are-unavailable-ubuntu-20-04-1-22-1-4271/706327 For now, edit the container with the previous version in repository: linuxserver/plex:version-1.22.1.4228-724c56e62 And also dont forget to set the VERSION env to 1.22.1.4228 Quote Link to comment
Frostbite2600 Posted April 1, 2021 Share Posted April 1, 2021 5 minutes ago, Octa said: Well it seems its a Plex issue rather than linuxserver.io, see here https://forums.plex.tv/t/server-settings-are-unavailable-ubuntu-20-04-1-22-1-4271/706327 For now, edit the container with the previous version in repository: linuxserver/plex:version-1.22.1.4228-724c56e62 And also dont forget to set the VERSION env to 1.22.1.4228 Perfect, that fixed it. Thanks for the work around! Quote Link to comment
rsuplido Posted April 1, 2021 Share Posted April 1, 2021 (edited) According here, fix is out under public: https://forums.plex.tv/t/server-settings-are-unavailable-ubuntu-20-04-1-22-1-4271/706327/52 Right now, change VERSION from: latest to: public and it should work Edited April 1, 2021 by rsuplido Quote Link to comment
wgstarks Posted April 2, 2021 Share Posted April 2, 2021 1.22.1.4274 has been pushed out. Hopefullylly it will be available soon. Quote Link to comment
jackfalveyiv Posted April 2, 2021 Share Posted April 2, 2021 I'm having an issue with Plex, and I don't know whether or not it is this docker. I am unable to play certain movies on my server, and this seems to have started a few weeks ago. Without rhyme or reason, certain files will not play on my server locally, but they will remotely for some users, but not all. This seems to be regardless of codec, resolution or source, as I would pull multiple variations of the same movie file and yet they still would not play. The odd thing about this is that some, but not all, of my remote users are able to stream the file without a problem, and when I stream the file from a friends' Plex server, the same file that I have on mine, it streams without a problem. I'm unsure if there is a permissions issue or maybe a problem with my hardware transcoding. I am using a GTX 3070 for hardware transcoding and trying to direct play/direct stream this file on Samsung TV, Apple TV, Roku, iOS and Chrome Browser clients and none are playing the file in question. I have attempted the codec deletion method but that didn't fix anything. I have tried reaching out in another thread here and on the Plex forums but have come up short. I'll upload my current Plex logs and my server diagnostics, but could use a hand diagnosing whatever this problem is. PlexLogs.zip trescommas-diagnostics-20210401-2001.zip Quote Link to comment
rsuplido Posted April 2, 2021 Share Posted April 2, 2021 (edited) 1.22.2.4276 is out and all is back to normal. Edited April 2, 2021 by rsuplido Quote Link to comment
trurl Posted April 2, 2021 Share Posted April 2, 2021 1 hour ago, wgstarks said: 1.22.1.4274 has been pushed out. Hopefullylly it will be available soon. Assuming you are using "latest", all you have to do is restart the container and it will get the latest. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.