NserUame Posted May 31, 2022 Share Posted May 31, 2022 Hello, Recently updated the container and hardware transcoding no longer works. Nothing shows on the dashboard or when using smi in the console. No settings were changed in the docker itself, still has runtime enabled as well as the gpuid. In plex itself the hardware acceleration box has been checked. Any idea what might be causing this? Kind of kicking myself as I didn't even mean to update the plex docker. Quote Link to comment
dchamb Posted May 31, 2022 Share Posted May 31, 2022 15 minutes ago, NserUame said: Hello, Recently updated the container and hardware transcoding no longer works. Nothing shows on the dashboard or when using smi in the console. No settings were changed in the docker itself, still has runtime enabled as well as the gpuid. In plex itself the hardware acceleration box has been checked. Any idea what might be causing this? Kind of kicking myself as I didn't even mean to update the plex docker. Which version of unRAID? I haven't been able to get it to work on anything after 6.9.2 Quote Link to comment
NserUame Posted June 1, 2022 Share Posted June 1, 2022 44 minutes ago, dchamb said: Which version of unRAID? I haven't been able to get it to work on anything after 6.9.2 6.10.0-rc8 It was working up until today when I updated the container itself. Quote Link to comment
redboneps Posted June 2, 2022 Share Posted June 2, 2022 Got the latest update and the now getting: Got exception from request handler: std::bad_cast Anyone else seeing this? After all the streaming they have added and now this, I am ready to leave Plex for good. Quote Link to comment
DisposableHero Posted June 2, 2022 Share Posted June 2, 2022 On 5/29/2022 at 7:05 AM, ctexy said: I updated this docker today, and now I can no longer access media. Note: This issue probably has nothing to do with this docker, but I'd just appreciate a heads up as to where to start looking! Plex starts as normal, and is accessible via the web ui on both local and remote devices. However, my media (one called tv, the other called movies) doesn't show anything. Instead I see "Something went wrong An unexpected error occurred." on both. This is when clicking "library" or "recommended" on each source. This was working fine until I checked it today, and I haven't updated anything else other than the community applications and unassigned devices plugins on unraid aside from that. I tried rebooting the server and restarting plex too. Any advice appreciated! I'm sure this is something simple. Thank you! just updated the docker this morning and ran into the same issue.. "Something went wrong" I have been running 6.10.1 since it came out without issues so something must have gone wrong with the docker update. Quote Link to comment
DisposableHero Posted June 2, 2022 Share Posted June 2, 2022 1 hour ago, DisposableHero said: just updated the docker this morning and ran into the same issue.. "Something went wrong" I have been running 6.10.1 since it came out without issues so something must have gone wrong with the docker update. fixed it by repairing the database Quote Link to comment
knalbone Posted June 3, 2022 Share Posted June 3, 2022 Is it possible to stop the plex media server service within this container while it is running? My db is corrupt and I'd like to repair it using the built in SQLite binary, but need the service to be stopped first. Quote Link to comment
Cessquill Posted June 3, 2022 Share Posted June 3, 2022 26 minutes ago, knalbone said: Is it possible to stop the plex media server service within this container while it is running? My db is corrupt and I'd like to repair it using the built in SQLite binary, but need the service to be stopped first. The two posts above yours describe how to stop the container, and scan/repair the database. Quote Link to comment
knalbone Posted June 3, 2022 Share Posted June 3, 2022 1 hour ago, Cessquill said: The two posts above yours describe how to stop the container, and scan/repair the database. Thanks and sorry for not reading. Quote Link to comment
tucansam Posted June 13, 2022 Share Posted June 13, 2022 (edited) Gang, I am going to be upgrading from an i7-2600 to an i7-9700F. I'm upgrading a couple of other systems too, and will have a GTX 1050ti laying around unused. From the standpoint of Plex transcoding, 1080p and possibly 4k, will the 1050ti have an appreciable impact in helping, or is the 9700F sufficient enough on its own? I have several family members who stream 1080p content and often share my 10mbps upstream connection, so I have streams limited to 3-4mbps. As such, as soon as I get three or more transcoding, my i7-2600 pegs. I know the 9700F is a huge upgrade, I'm just wondering if the 1050ti is worth hanging onto and putting in my unraid server for Plex. If so, I'm not sure how to enable its use in the docker container. Thanks. Edited June 13, 2022 by tucansam Quote Link to comment
alturismo Posted June 13, 2022 Share Posted June 13, 2022 2 hours ago, tucansam said: From the standpoint of Plex transcoding, 1080p and possibly 4k, will the 1050ti have an appreciable impact in helping, or is the 9700F sufficient enough on its own? you know the "F" versions dont have a igpu included ? so you loose the igpu hardware transcoding then ... a 9700 would be better therefore then a 1050ti (which is limited to 3 transcodes max afaik) Quote Link to comment
tucansam Posted June 13, 2022 Share Posted June 13, 2022 6 hours ago, alturismo said: you know the "F" versions dont have a igpu included ? so you loose the igpu hardware transcoding then ... a 9700 would be better therefore then a 1050ti (which is limited to 3 transcodes max afaik) Thank you. Yes, I have an old pcie-1x NVS200 to use as a video card in that server, unless the 1050ti would be the better option. Was just trying to figure out if the 9700 would be better served by giving it a higher-end video card. Quote Link to comment
ConnerVT Posted June 13, 2022 Share Posted June 13, 2022 Let's not overthink this one. A i7-9700F + GTX1050ti > i7-2600 + iGPU. By a significant amount. Especially if you have the hardware in hand. For all hardware transcoding, Plex Pass is required. Install the NVidia plugin. Follow the excellent directions in the plugin's support thread. Enjoy videos. As for 4K to 1080 transcoding, it is always a bad idea, no matter what hardware you are using. I've yet to come across anyone who does so without issues. Quote Link to comment
pnbrooks Posted June 15, 2022 Share Posted June 15, 2022 Hi All, So, I've just noticed sort of a weird problem, and, since I'm not sure how to search for the answer, I figured I'd raise it here. Went to access Plex today, and my libraries weren't available under my main, admin account, but I was still connected to the server. Updated the docker and Unraid to the latest versions, no luck. For science, I made a new managed account while logged in as the admin. I then accessed Plex via the new managed account. The managed account has full access to all my libraries. I'm assuming this is some sort of permissions problem with the docker update last night (6/14/2022), but I'm really at a loss. Has anyone else experienced this? Has anyone got any idea of how I can get my regular account to work properly again? I can get logs if you need them, but I wasn't sure which ones might be helpful. Thanks in advance for your help! Quote Link to comment
chris_netsmart Posted June 18, 2022 Share Posted June 18, 2022 I hope that someone can help I just rollback my unraid server to 6.9 to get someone else to work, but in doing so, my plex server is now showing my the following error when I try to start it my question is: if I create a new Plex container and copied in my old Plex container files and folders then would this resolve the issue ? or is there a easier way to resolve this ? I also attached my log file from the container PlexLog.txt Quote Link to comment
pnbrooks Posted June 18, 2022 Share Posted June 18, 2022 Hey Chris, That should work, yeah. What I would recommend, however (and what worked for me), was to move from the Linux Server repository to the Binhex-Plex repository. I just used the same mappings and settings on both dockers, deleted the Linux docker, and was back up and running within a half an hour. I hope this helps. Quote Link to comment
DavidNguyen Posted June 26, 2022 Share Posted June 26, 2022 This has probably been asked before, but upon searching it seems that the situation keeps changing. Using my Ryzen 2400G, I'm trying to get hw transcoding working with the container, and in theory it should really work. ich777's Jellyfin container utilises the iGPU, and mauimauer has a working container on dockerhub. Is there any way for this function to be merged into lsio? Quote Link to comment
Retched1 Posted June 26, 2022 Share Posted June 26, 2022 (edited) On 5/25/2022 at 2:23 AM, goodyear said: Latest Linuxserver Plex container release introduces permission errors in unRAID (maybe related to 6.10?). Upgraded to 6.10.1 a few days ago with no major issues, Plex was working fine last night, and this morning Plex from Linuxserver stopped working with permission errors: ****** PLEX MEDIA SERVER CRASHED, CRASH REPORT WRITTEN: /config/Library/Application Support/Plex Media Server/Crash Reports/1.26.2.5797-5bd057d2b/PLEX MEDIA SERVER/48e796f0-ca99-405e-6d6b99b6-b191e5f8.dmp Starting Plex Media Server. libc++abi: terminating with uncaught exception of type std::runtime_error: Codecs: Initialize: 'boost::filesystem::create_directory: Permission denied: "/config/Library/Application Support/Plex Media Server/Codecs/994f4ee-4302-linux-x86_64"' I have containers on auto-update, and the Plex container updated during the night, so I rolled back to version 1.26.1 (edited repository to linuxserver/plex:1.26.1) and no more errors. Question is if this is an issue on Linuxserver's Plex latest release, or if 6.10 introduced something which breaks new releases? EDIT: Reddit made me aware that the error was local, ran the following as a user script and it solved the permission issue, will check back if it reappears: #!/bin/sh for dir in "/mnt/user/appdata/plex/" do `echo $dir` `chmod -R ug+rw,ug+X,o-rwx $dir` chown -R nobody:users $dir done This fixed this for me. After Unraid updated to 6.10.3. plex blew up (linuxserver build), same permissions error. plex log ***** PLEX MEDIA SERVER CRASHED, CRASH REPORT WRITTEN: /config/Library/Application Support/Plex Media Server/Crash Reports/1.27.1.5916-6b0e31a64/PLEX MEDIA SERVER/d8e7a7b9-9c5f-44c4-0b0ab38c-bc4b6eac.dmp Warning:/config/Library/Application Support/Plex Media Server/Crash Reports/1.27.1.5916-6b0e31a64 is not found or not a directory. Starting Plex Media Server. libc++abi: terminating with uncaught exception of type std::runtime_error: Codecs: Initialize: 'boost::filesystem::create_directory: Permission denied: "/config/Library/Application Support/Plex Media Server/Codecs/d53cb63-4323-linux-x86_64"' ****** PLEX MEDIA SERVER CRASHED, CRASH REPORT WRITTEN: /config/Library/Application Support/Plex Media Server/Crash Reports/1.27.1.5916-6b0e31a64/PLEX MEDIA SERVER/294892d2-f0ad-4821-cfce8ba1-9b610837.dmp Warning:/config/Library/Application Support/Plex Media Server/Crash Reports/1.27.1.5916-6b0e31a64 is not found or not a directory. Starting Plex Media Server. libc++abi: terminating with uncaught exception of type std::runtime_error: Codecs: Initialize: 'boost::filesystem::create_directory: Permission denied: "/config/Library/Application Support/Plex Media Server/Codecs/d53cb63-4323-linux-x86_64"' ****** PLEX MEDIA SERVER CRASHED, CRASH REPORT WRITTEN: /config/Library/Application Support/Plex Media Server/Crash Reports/1.27.1.5916-6b0e31a64/PLEX MEDIA SERVER/12cbb93b-0e16-4a1b-7e945588-80593f08.dmp Warning:/config/Library/Application Support/Plex Media Server/Crash Reports/1.27.1.5916-6b0e31a64 is not found or not a directory. Starting Plex Media Server. libc++abi: terminating with uncaught exception of type std::runtime_error: Codecs: Initialize: 'boost::filesystem::create_directory: Permission denied: "/config/Library/Application Support/Plex Media Server/Codecs/d53cb63-4323-linux-x86_64"' ****** PLEX MEDIA SERVER CRASHED, CRASH REPORT WRITTEN: /config/Library/Application Support/Plex Media Server/Crash Reports/1.27.1.5916-6b0e31a64/PLEX MEDIA SERVER/f4f53198-318d-4f74-ab9f29a2-83e66ae8.dmp Warning:/config/Library/Application Support/Plex Media Server/Crash Reports/1.27.1.5916-6b0e31a64 is not found or not a directory. Starting Plex Media Server. libc++abi: terminating with uncaught exception of type std::runtime_error: Codecs: Initialize: 'boost::filesystem::create_directory: Permission denied: "/config/Library/Application Support/Plex Media Server/Codecs/d53cb63-4323-linux-x86_64"' ****** PLEX MEDIA SERVER CRASHED, CRASH REPORT WRITTEN: /config/Library/Application Support/Plex Media Server/Crash Reports/1.27.1.5916-6b0e31a64/PLEX MEDIA SERVER/cb745128-fe3f-4c35-28a8abaf-68b40732.dmp Warning:/config/Library/Application Support/Plex Media Server/Crash Reports/1.27.1.5916-6b0e31a64 is not found or not a directory. Starting Plex Media Server. libc++abi: terminating with uncaught exception of type std::runtime_error: Codecs: Initialize: 'boost::filesystem::create_directory: Permission denied: "/config/Library/Application Support/Plex Media Server/Codecs/d53cb63-4323-linux-x86_64"' ****** PLEX MEDIA SERVER CRASHED, CRASH REPORT WRITTEN: /config/Library/Application Support/Plex Media Server/Crash Reports/1.27.1.5916-6b0e31a64/PLEX MEDIA SERVER/a9def54c-8084-41be-25acc19b-e2ff0d55.dmp Warning:/config/Library/Application Support/Plex Media Server/Crash Reports/1.27.1.5916-6b0e31a64 is not found or not a directory. Starting Plex Media Server. Edited June 26, 2022 by Retched1 Quote Link to comment
ashman70 Posted June 29, 2022 Share Posted June 29, 2022 (edited) For some reason my Plex docker will not start now, this is the output whenI try to start it. Not sure why it is saying unknown paramater 'Nvidia' I've had a p2000 card in my server working with Plex just fine for ages. I managed to get Plex running by removing the Nvidia parameters and am currently using Quicksync, just not sure what happened to the Nvidia plugin or driver? Any help would be appreciated. Managed to get the Nvidia driver reinstalled and everything is back to norma, was just spooked as this has never happened to me in using unRAID for 6 years and at least four with this P2000. Edited June 30, 2022 by ashman70 Quote Link to comment
BigDanT Posted July 1, 2022 Share Posted July 1, 2022 (edited) Hi All, Is it me or has something started cause the plex db to corrupt on a regular basis ?? I have to either repair or use a backup almost weekly now. I have all of my meta and app data on a separate SSD (Using unassigned devices) & reference it using "appdata: /mnt/disks/plexssd/" in the docker settings and im on version 6.10.3 of unraid. I do use Plex meta manager, but i dont think its that. I turned off nightly docker updates to weekly in case that was the issue, but the DB still corrupts on a weekly basis, sometimes within hours of my repairing it! Is it just me or have others started noticing this behavior ?? Edited July 1, 2022 by BigDanT Quote Link to comment
OrneryTaurus Posted July 2, 2022 Share Posted July 2, 2022 On 6/29/2022 at 10:13 AM, ashman70 said: For some reason my Plex docker will not start now, this is the output whenI try to start it. Not sure why it is saying unknown paramater 'Nvidia' I've had a p2000 card in my server working with Plex just fine for ages. I managed to get Plex running by removing the Nvidia parameters and am currently using Quicksync, just not sure what happened to the Nvidia plugin or driver? Any help would be appreciated. Managed to get the Nvidia driver reinstalled and everything is back to norma, was just spooked as this has never happened to me in using unRAID for 6 years and at least four with this P2000. I had the same thing happen when I went from 6.10.1 to 6.10.3 - The nvidia plugin had to be deleted and re-installed. once that was done, I would get this error. An extra reboot (likely so the NVidia driver can load properly) fixed it and I was able to re-add the Plex docker container from the old template. Quote Link to comment
Big Dan T Posted July 6, 2022 Share Posted July 6, 2022 (edited) Friday I fixed my DB. Tonight it corrupted again 6 days later !! Any help would be greatly received ? I used to run my Plex server on an intel nuc windows machine for like 3 years solid and never had these types of issues. would love to know if it’s my unraid set or a bug in unraid or the docker or something I’m doing with either backups or PMM ? Help ! Thanks Edited July 6, 2022 by Big Dan T Quote Link to comment
TrondHjertager Posted July 13, 2022 Share Posted July 13, 2022 I am in the process of creating a backup-scheme for all my servers and data, but when it comes to plex I am not sure what would be the best way. I was thinking of maybe using rsync and just copy everything to my backup server. But I se that my metadata-folder is 22Gb and hundreds of thousands (if not millions) of tiny files. I guess this is just things like thumbnails etc? Is this something that I need to backup? If I need to do a disaster recovery I would like to get my plex up and running with all the userdata and watchprogress etc, but I don't have any problems re-downloading things like thumbnails and other non-essential data. I have a 1gbit internet connection and a beefy server. My total appdata/plex folder is 33GB. 22GB of this is the /appdata/plex/Library/Application Support/Plex Media Server/Metadata folder. Can I just exclude this folder from the backup without breaking it? Quote Link to comment
alturismo Posted July 13, 2022 Share Posted July 13, 2022 49 minutes ago, TrondHjertager said: Can I just exclude this folder from the backup without breaking it? yep Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.