Ginfrecss Posted January 13, 2020 Share Posted January 13, 2020 22 minutes ago, trurl said: Post diagnostics Yes, sorry. Here are the diagnostics. tower-diagnostics-20200113-1821.zip Quote Link to comment
BRiT Posted January 13, 2020 Share Posted January 13, 2020 Upgraded from 6.8.0 a few days back without issue -- still have WSDD disabled, have not tried to see if it's still a CPU HOG or not. Quote Link to comment
sparkus Posted January 14, 2020 Share Posted January 14, 2020 (edited) Tried to update today, got what I think is the same error as @fatalfurry above. Fell back to backup 6.8.0 and it booted without issue. diagnostics attached. tower-diagnostics-20200113-1708.zip Edited January 14, 2020 by sparkus tagged fatalfurry correctly. Quote Link to comment
BRiT Posted January 14, 2020 Share Posted January 14, 2020 43 minutes ago, SpecFroce said: WSDD? @BRiT This bug where WSDD for Samba Discovery pegs 1 CPU core at 100%: Quote Link to comment
Ginfrecss Posted January 14, 2020 Share Posted January 14, 2020 2 hours ago, Ginfrecss said: Ok thx ! I did this and it reported 0 errors / issues. I doubt it's the problem ? Using the same USB as in 6.8.0 and I did not have that issue. Quote Link to comment
poniz Posted January 14, 2020 Share Posted January 14, 2020 updated without issues, no far so good. Thank you guys for all the hard work. Quote Link to comment
rbroberts Posted January 14, 2020 Share Posted January 14, 2020 Upgrade seemed to work, but... system won't boot, it's in a loop boot: Undef symbol FAIL: openConsole Failed to load libutil.c32 Failed to load COM32 file menu.c32 boot: ... I'm going to go with the assumption that my USB stick is corrupt and hope to recover. But...any suggestions or insights are appreciated. Quote Link to comment
rbroberts Posted January 14, 2020 Share Posted January 14, 2020 5 minutes ago, rbroberts said: I'm going to go with the assumption that my USB stick is corrupt and hope to recover. But...any suggestions or insights are appreciated. Well, that's disappointing. I just pulled the USB stick and and ran chkdsk on it from my Windows 10 laptop; chkdsk reports it is just fine. Quote Link to comment
rbroberts Posted January 14, 2020 Share Posted January 14, 2020 Okay, so...in spite of the BIOS boot menu having the USB stick as the first choice, it seems to be dropping all the way down to PXE boot which is where that message is coming from. So it looks like the upgrade somehow made the USB stick unbootable. Is there a standard way to recover from that? Quote Link to comment
Frank1940 Posted January 14, 2020 Share Posted January 14, 2020 17 minutes ago, rbroberts said: Is there a standard way to recover from that? try running makebootable again would be my first choice. Quote Link to comment
ken-ji Posted January 14, 2020 Share Posted January 14, 2020 Uneventful update from 6.8.0. Keep up the good work! Quote Link to comment
testdasi Posted January 14, 2020 Share Posted January 14, 2020 Same, uneventful update from 6.8.0. Quote Link to comment
rbroberts Posted January 14, 2020 Share Posted January 14, 2020 8 hours ago, Frank1940 said: try running makebootable again would be my first choice. No joy on that. make_bootable.bat ran normally, looks like it worked, but it's going into exactly the same loop. Based on this page: https://wiki.unraid.net/Files_on_v6_boot_drive, I can't see anything obvious I'm missing, the files in syslinux look normal. menu.c32 is there. I've not no clue at this point. D:\>dir Volume in drive D is UNRAID Volume Serial Number is 1EC4-B638 Directory of D:\ 01/11/2020 03:17 AM 7,483,392 bzfirmware 01/11/2020 03:17 AM 4,682,400 bzimage 01/13/2018 01:23 AM <DIR> EFI 01/13/2020 09:55 PM <DIR> config 01/11/2020 03:22 AM 65 bzfirmware.sha256 01/11/2020 03:22 AM 65 bzimage.sha256 01/11/2020 03:17 AM 9,515,008 bzmodules 01/11/2020 03:22 AM 65 bzmodules.sha256 01/13/2020 09:54 PM <DIR> syslinux 01/03/2017 01:42 AM <DIR> custom 04/13/2017 05:14 AM 14,322 readvz 10/21/2019 08:42 AM <DIR> logs 01/13/2020 09:54 PM <DIR> previous 01/11/2020 03:22 AM 129,684,628 bzroot 01/11/2020 03:19 AM 71,207,536 bzroot-gui 01/11/2020 03:22 AM 65 bzroot-gui.sha256 01/11/2020 03:22 AM 65 bzroot.sha256 01/11/2020 03:17 AM 1,760 make_bootable.bat 01/11/2020 03:17 AM 3,291 make_bootable_linux 10/21/2018 02:14 AM <DIR> preclear_reports 01/11/2020 03:17 AM 2,428 make_bootable_mac 01/11/2020 03:17 AM 150,024 memtest 01/11/2020 03:17 AM 14,391 changes.txt 01/11/2020 03:17 AM 7,975 license.txt 01/11/2020 03:17 AM 492 syslinux.cfg- 18 File(s) 222,767,972 bytes 7 Dir(s) 31,198,527,488 bytes free D:\syslinux>dir Volume in drive D is UNRAID Volume Serial Number is 1EC4-B638 Directory of D:\syslinux 12/17/2016 08:19 PM <DIR> . 12/17/2016 08:19 PM <DIR> .. 01/12/2018 11:23 PM 122,308 ldlinux.c32 01/12/2018 11:23 PM 186,500 libcom32.c32 01/12/2018 11:23 PM 24,148 libutil.c32 01/12/2018 11:23 PM 1,767 make_bootable_mac.sh 01/12/2018 11:23 PM 10,772 mboot.c32 01/12/2018 11:23 PM 447 mbr.bin 01/12/2018 11:23 PM 26,596 menu.c32 01/12/2018 11:23 PM 238,836 syslinux 01/12/2018 11:23 PM 492 syslinux.cfg 01/12/2018 11:23 PM 243,712 syslinux.exe 01/12/2018 11:23 PM 1,654 make_bootable_linux.sh 01/12/2018 11:23 PM 272,848 syslinux_linux 12 File(s) 1,130,080 bytes 2 Dir(s) 31,198,527,488 bytes free Quote Link to comment
JorgeB Posted January 14, 2020 Share Posted January 14, 2020 7 minutes ago, rbroberts said: No joy on that. make_bootable.bat ran normally, looks like it worked, but it's going into exactly the same loop. Backup config folder from flash then recreate it with the USB tool or manually, finally restore config folder. Quote Link to comment
sonofdbn Posted January 14, 2020 Share Posted January 14, 2020 Is anyone else experiencing slower copy speeds? Previously I was on 6.5.3 and upgraded to 6.7.2, but went back to 6.5.3 because copying speeds from my SSD cache drive to the array went down substantially: from about 74 MB/s to 52 MB/s. Now I've upgraded from 6.5.3 to 6.8.1 and unfortunately am experiencing the same slow copy speeds (in fact possibly even slightly slower). Quote Link to comment
mwoods98 Posted January 14, 2020 Share Posted January 14, 2020 I have a quick question: To be cautious as a lot of us have invested lots of time in our Unraid setups and configuration, what would be the best suggestion to backup unraid before attempting an upgrade? Just in case something goes wrong. Also, are there any suggestions on running chkdsk or anything before attempting the update? Thanks Quote Link to comment
wgstarks Posted January 14, 2020 Share Posted January 14, 2020 1 minute ago, mwoods98 said: I have a quick question: To be cautious as a lot of us have invested lots of time in our Unraid setups and configuration, what would be the best suggestion to backup unraid before attempting an upgrade? Just in case something goes wrong. Also, are there any suggestions on running chkdsk or anything before attempting the update? Thanks I just download a backup of flash. That contains everything you need to revert to the current OS if you can’t access the webUI after an upgrade. Quote Link to comment
mwoods98 Posted January 14, 2020 Share Posted January 14, 2020 3 minutes ago, wgstarks said: I just download a backup of flash. That contains everything you need to revert to the current OS if you can’t access the webUI after an upgrade. @wgstarks Would that be as simple as just browsing to the flash drive and just copying everything over? to a backup folder? Quote Link to comment
itimpi Posted January 14, 2020 Share Posted January 14, 2020 21 minutes ago, mwoods98 said: @wgstarks Would that be as simple as just browsing to the flash drive and just copying everything over? to a backup folder? The easier way is click on the flash drive on the Main tab and select the Backup option. 1 1 Quote Link to comment
wgstarks Posted January 14, 2020 Share Posted January 14, 2020 4 minutes ago, mwoods98 said: @wgstarks Would that be as simple as just browsing to the flash drive and just copying everything over? to a backup folder? Main>flash>flash backup. There will probably be a short delay while the zip is created. 1 Quote Link to comment
limetech Posted January 14, 2020 Author Share Posted January 14, 2020 3 minutes ago, mwoods98 said: @wgstarks Would that be as simple as just browsing to the flash drive and just copying everything over? to a backup folder? It's as simple as browsing to Flash page via Main and clicking Flash Backup button. This downloads a zip file containing everything on your usb flash boot device. You can then use this file to feed into the USB Creator tool. 1 1 Quote Link to comment
hpka Posted January 14, 2020 Share Posted January 14, 2020 A few days in: No issues with upgrade or in the days since. I had no issues with 6.8.0 either. Quote Link to comment
klevans69 Posted January 14, 2020 Share Posted January 14, 2020 OK. 6.8.1 won't boot unless I use safe mode. Unraid has been stable for me for 12 years. How do I fix or downgrade back to 6.8.0? Quote Link to comment
Squid Posted January 14, 2020 Share Posted January 14, 2020 8 minutes ago, klevans69 said: 6.8.1 won't boot unless I use safe mode. Which tells you that its a plugin interfering (probably way out of date or something) 9 minutes ago, klevans69 said: How do I fix What's the contents of /config/plugins on the flash drive? 9 minutes ago, klevans69 said: downgrade back to 6.8.0? Tools - Upgrade OS will allow you to downgrade Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.