Badboy Posted December 21, 2018 Share Posted December 21, 2018 Hi, Switched to Emby from Plex. I like their design concepts a little better, Plex has been a little glitchy as of late. I already bought a lifetime license a few years ago., so going to try again. The issue I have is I would like to offer Emby remotely to a couple people. What is the easiest way to get SSL working with it? I have Let's Encrypt on the server for local network connections. Anyway to incorporate that into Emby? Thanks Quote Link to comment
strike Posted December 21, 2018 Share Posted December 21, 2018 Sure, if you're using LSIO's let's encrypt container which also has nginx you could just reverse proxy emby. All you need is either an own domain name or a free dynamic DNS service like duckdns. It's pretty easy to set up. Or you can also check out the new container by @Djoss nginx proxy manager which is supposed to be even easier to set up. If you're not comfortable with reverse proxy there is a way to set up just SSL with your LE certificate, but I couldn't tell you how to do it. I know I've seen it somewhere on google though. Quote Link to comment
Badboy Posted December 21, 2018 Share Posted December 21, 2018 3 minutes ago, strike said: Sure, if you're using LSIO's let's encrypt container which also has nginx you could just reverse proxy emby. All you need is either an own domain name or a free dynamic DNS service like duckdns. It's pretty easy to set up. Or you can also check out the new container by @Djoss nginx proxy manager which is supposed to be even easier to set up. If you're not comfortable with reverse proxy there is a way to set up just SSL with your LE certificate, but I couldn't tell you how to do it. I know I've seen it somewhere on google though. I have the linuxserver/letsencrypt docker of Let's Encrypt. I was just reading about the nginx proxy manager. It suppose to be pretty easy. Might give that ago. Thanks for the reply, much appreciated! Quote Link to comment
dmacias Posted December 21, 2018 Share Posted December 21, 2018 (edited) 17 hours ago, Badboy said: I have the linuxserver/letsencrypt docker of Let's Encrypt. I was just reading about the nginx proxy manager. It suppose to be pretty easy. Might give that ago. Thanks for the reply, much appreciated! I just forward port 8920 to my let's encrypt docker and added this to the nginx default site ### Emby Server Configuration server { listen 8920 ssl http2; server_name dynamic_server.com; ssl on; ssl_certificate /config/keys/letsencrypt/fullchain.pem; ssl_certificate_key /config/keys/letsencrypt/privkey.pem; ssl_dhparam /config/nginx/dhparams.pem; ssl_ciphers ECDH+AESGCM:ECDH+AES256:ECDH+AES128:DH+3DES:!ADH:!AECDH:!MD5; ssl_prefer_server_ciphers on; ssl_protocols TLSv1 TLSv1.1 TLSv1.2; ssl_session_cache shared:SSL:10m; ssl_session_timeout 5m; add_header Strict-Transport-Security "max-age=31536000" always; server_tokens off; proxy_ssl_verify off; proxy_ssl_session_reuse on; proxy_ssl_protocols TLSv1 TLSv1.1 TLSv1.2; proxy_cache off; proxy_store off; location / { proxy_pass https://emby_ip_address:8920; include /config/nginx/proxy.conf; # proxy_set_header Host $host; # proxy_set_header X-Forwarded-Proto $scheme; proxy_intercept_errors on; proxy_set_header Upgrade $http_upgrade; proxy_set_header Connection "Upgrade"; } } ### End Emby Server Configuration I added the path /mnt/cache/appdata/letsencrypt/keys/letsencrypt/ to /keys in the Emby docker and under Advanced settings/custom ssl certificate I added /keys/privkey.pfx. I also added the Emby logs path to the letsencrypt docker, then added a filter to fail2ban for Emby Edited December 22, 2018 by dmacias Quote Link to comment
Badboy Posted December 21, 2018 Share Posted December 21, 2018 3 minutes ago, dmacias said: I just forward port 8920 to my let's encrypt docker and added this to the nginx default site ### Emby Server Configurationserver { listen 8920 ssl http2; server_name father.onthewifi.com; ssl on; ssl_certificate /config/keys/letsencrypt/fullchain.pem; ssl_certificate_key /config/keys/letsencrypt/privkey.pem; ssl_dhparam /config/nginx/dhparams.pem; ssl_ciphers ECDH+AESGCM:ECDH+AES256:ECDH+AES128:DH+3DES:!ADH:!AECDH:!MD5; ssl_prefer_server_ciphers on; ssl_protocols TLSv1 TLSv1.1 TLSv1.2; ssl_session_cache shared:SSL:10m; ssl_session_timeout 5m; add_header Strict-Transport-Security "max-age=31536000" always; server_tokens off; proxy_ssl_verify off; proxy_ssl_session_reuse on; proxy_ssl_protocols TLSv1 TLSv1.1 TLSv1.2; proxy_cache off; proxy_store off; location / { proxy_pass https://192.168.60.86:8920; include /config/nginx/proxy.conf; # proxy_set_header Host $host; # proxy_set_header X-Forwarded-Proto $scheme; proxy_intercept_errors on; proxy_set_header Upgrade $http_upgrade; proxy_set_header Connection "Upgrade"; }}### End Emby Server Configuration I added the path /mnt/cache/appdata/letsencrypt/keys/letsencrypt/ to /keys in the Emby docker and under Advanced settings/custom ssl certificate I added /keys/privkey.pfx. I also added the Emby logs path to the letsencrypt docker, then added a filter to fail2ban for Emby Thank you, go grab a domain and give it a go. Quote Link to comment
Lebowski Posted January 12, 2019 Share Posted January 12, 2019 If anyone needed help with hardware transcode, i have a guide here: Quote Link to comment
Napper198 Posted January 17, 2019 Share Posted January 17, 2019 Just for documentation: after updating my instance, it immediately stopped itself after successful start with error Failed to initialize CoreCLR, HRESULT: 0x80004005 Running Docker Safe New Perms fixed this Quote Link to comment
vurt Posted January 18, 2019 Share Posted January 18, 2019 In case anyone's setup is broken: https://emby.media/community/index.php?/topic/21888-emby-for-kodi/page-17#entry680481 1 Quote Link to comment
Uroth Posted January 27, 2019 Share Posted January 27, 2019 Hello, is there a way to downgrade to the old version(Before 4.xxxx)? This new dumpster fire of an update is crap and I would like to go back to the old version. Transcoding is locked to premium users and the view for mixed content is messed up so it shows all newly added episodes of a tv-series instead of grouping it up. Like this: I use mixed content since I want Cartoon series and Movies and Animations to share the same library. Quote Link to comment
ken-ji Posted January 27, 2019 Share Posted January 27, 2019 You can edit the docker so that the repository is changed from emby/embyserver:latest to emby/embyserver:3.5.3.0 (which is the previous stable version) 1 Quote Link to comment
Uroth Posted January 28, 2019 Share Posted January 28, 2019 Thank you, that worked. Guess I will stay on this version forever now. Quote Link to comment
blaine07 Posted February 7, 2019 Share Posted February 7, 2019 I was playing with this the other day and was accessing it through my reverse proxy. Under NO circumstances could I get it to REQUIRE me logged in. Didn't matter what device, I went to its HTTP address and was instantly on dashboard with ADMIN rights to add/delete at will. Does the update that I see today address or fix that issue? I had one account, admin account, and it DOES have a password. Ideas? Quote Link to comment
buzzra Posted February 7, 2019 Share Posted February 7, 2019 Is there anyway to see what changes are in each of these docker updates? I have done all of them, and the version number on the server management dashboard has not changed since v4.0.1.0. buzz Quote Link to comment
JonathanM Posted February 7, 2019 Share Posted February 7, 2019 33 minutes ago, buzzra said: Is there anyway to see what changes are in each of these docker updates? I have done all of them, and the version number on the server management dashboard has not changed since v4.0.1.0. buzz Remember that a docker is a sort of mini virtual machine, much of the updates are to keep the base OS inside the container up to date. Quote Link to comment
buzzra Posted February 9, 2019 Share Posted February 9, 2019 On 2/7/2019 at 1:47 PM, jonathanm said: Remember that a docker is a sort of mini virtual machine, much of the updates are to keep the base OS inside the container up to date. I understand that, but you didn't answer the question. I would still like to see a change log of what was updated. Does such a thing exist, and if not, why? buzz Quote Link to comment
CHBMB Posted February 9, 2019 Share Posted February 9, 2019 5 minutes ago, BRiT said: Lazy Devs. It's an enormous amount of work to log each change, it's just not feasible. @BRiT Unless you want to volunteer to do ours matey? 😜 Quote Link to comment
BRiT Posted February 9, 2019 Share Posted February 9, 2019 3 minutes ago, CHBMB said: It's an enormous amount of work to log each change, it's just not feasible. @BRiT Unless you want to volunteer to do ours matey? 😜 Of course not. I'm a Lazy Dev. I forget that not many folks around this forum is aware of that knee-jerk reaction joke. It shows up all the time on the graphical/game related forums. Frankly, developers' time is better spent developing than it is documenting, unless it's a fundamental breaking change that requires manual steps to adjust. Quote Link to comment
CHBMB Posted February 9, 2019 Share Posted February 9, 2019 Of course not. I'm a Lazy Dev. I forget that not many folks around this forum is aware of that knee-jerk reaction joke. It shows up all the time on the graphical/game related forums. Frankly, developers' time is better spent developing than it is documenting, unless it's a fundamental breaking change that requires manual steps to adjust.Oh I got the joke, meant to quote the person above, although my offer stands@BRiT I'd love to work with you!Sent from my Mi A1 using Tapatalk Quote Link to comment
tjb_altf4 Posted February 10, 2019 Share Posted February 10, 2019 On 1/29/2019 at 5:10 AM, Uroth said: Thank you, that worked. Guess I will stay on this version forever now. Take a look at jellyfin, its a project forked from emby 3.5.2. If your not happy with the direction emby has taken, this is a good alternative. Quote Link to comment
deaerator Posted February 11, 2019 Share Posted February 11, 2019 With the new Unraid-Nvidia Plugin for leveraging GPU Acceleration, Currently I want to use it on Emby since it can Decode/Encode out of the box with the latest FFMPEG. But I am having trouble with playback. Every 5-7 seconds the it will stop playback for milliseonds making it real annoying. How do I troubleshoot this. Emby Logs attached. Log.txt Transcoder log.txt Quote Link to comment
BRiT Posted February 11, 2019 Share Posted February 11, 2019 Post in the emby forums. They likely have better support for that specific situation. Quote Link to comment
David Bott Posted March 2, 2019 Share Posted March 2, 2019 WARNING!!!!! I am Premiere Lifetime Member and I went into Emby Version 4.0.2.0 and went into Movies in my web browser. In looking at the list of movies I had seen a lot of cover art was not showing up for some reason. So I went back one screen and I clicked on the 3 dots and selected Refresh Metadata and selected to REPLACE ALL METADATA and checked the box to Replace all the Images. At that point it just went through and deleted everything! GONE! Nothing! All deleted! Posted on the Emby site about this and this was the reply... "Ok it looks like you did actually use the delete media function, and for whatever reason it may have gone up an extra level when deleting the movie folder. I will have to add more logging to confirm this. I believe we have noticed this issue being associated with the database upgrade from 3.5, but it does not occur on newly created libraries. It is already resolved for the next release so that it will not happen again. I apologize for the disruption. Luke" Over 1000 movies GONE! Seeing that unRAID has NO WAY to recover deleted files....Emby just toasted me! (Along with unRAID not having a snapshot backup system and being just parity. I have been a unRAIND user for a very long time. First time I lost everything. Now I am looking for a solution that could have saved me with such a large BUG. Quote Link to comment
ashman70 Posted March 2, 2019 Share Posted March 2, 2019 I am sorry to hear about this but it is not an unRAID issue. You should have backups of your data for situations like this, you cannot blame unRAID. Sure it would be nice if unRAID had snapshot capability but you are aware it does not, so you can't rely on it. I have close to 10,000 movies in my collection and I have them on two different servers and backed up to a third that I keep offline. I realize not everyone can afford to to do this, but if your data is important to you, then you have to think about a backup strategy. Perhaps it is also time to look at Plex unless you don't like it, I have been using it for years without issues. Quote Link to comment
strike Posted March 2, 2019 Share Posted March 2, 2019 5 minutes ago, David Bott said: Seeing that unRAID has NO WAY to recover deleted files....Emby just toasted me! (Along with unRAID not having a snapshot backup system and being just parity. I'm sorry this happened to you, but what you're saying is simply not true. Unraid can perfectly recover deleted files IF you have the recycle bin plugin installed and running. Also, unraid does have snapshot capability, you just have to use BTRFS, then you can snapshot all you want. And if you're a regular user of this forum you should have seen users mention over and over again that Unraid IS NOT A REPLACEMENT FOR BACKUPS. Now, that being said you might be lucky and MAYBE can recover your files. MAYBE... Several users have accidentally deleted files and been able to recover them using UFS explorer: https://www.ufsexplorer.com/ this is probably your best bet. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.