[Support] binhex - DelugeVPN


8746 posts in this topic Last Reply

Recommended Posts

I can not acces the webui.

Read all the possible FAQs.

 

Heres the log:

ErrorWarningSystemArrayLogin


VPN_PORT=443
VPN_PROTOCOL=udp
VPN_PROV=custom
VPN_REMOTE=ams-193.whiskergalaxy.com
VPN_USER=********
_='[debug] Environment variables defined as follows'
[debug] Directory listing of files in /config/openvpn as follows

2020-07-29 14:21:36,290 DEBG 'watchdog-script' stderr output:
dos2unix: converting file /config/core.conf to Unix format...

2020-07-29 14:21:36,292 DEBG 'watchdog-script' stdout output:
[debug] Waiting for valid IP address from tunnel...

2020-07-29 14:21:36,295 DEBG 'start-script' stdout output:
total 8
drwxrwxr-x 1 nobody users 0 Jul 29 14:21 .
drwxrwxr-x 1 nobody users 32 Jul 29 14:21 ..
-rwxrwxr-x 1 nobody users 23 Jul 29 14:19 credentials.conf
-rwxrwxr-x 1 nobody users 2975 Jul 29 14:21 Windscribe-Amsterdam-Tulip.ovpn

2020-07-29 14:21:36,355 DEBG 'start-script' stdout output:
[debug] Contents of ovpn file /config/openvpn/Windscribe-Amsterdam-Tulip.ovpn as follows...

2020-07-29 14:21:36,360 DEBG 'start-script' stdout output:
remote ams-193.whiskergalaxy.com 443
client
dev tun

p

nobind
auth-user-pass credentials.conf

resolv-retry infinite

auth SHA512
cipher AES-256-CBC
comp-lzo
verb 2
mute-replay-warnings
remote-cert-tls server
persist-key

key-direction 1
<ca>
-----BEGIN CERTIFICATE-----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-----END CERTIFICATE-----
</ca>
<tls-auth>
-----BEGIN OpenVPN Static key V1-----
5801926a57ac2ce27e3dfd1dd6ef8204
2d82bd4f3f0021296f57734f6f1ea714
a6623845541c4b0c3dea0a050fe6746c
b66dfab14cda27e5ae09d7c155aa554f
399fa4a863f0e8c1af787e5c602a801d
3a2ec41e395a978d56729457fe6102d7
d9e9119aa83643210b33c678f9d4109e
3154ac9c759e490cb309b319cf708cae
83ddadc3060a7a26564d1a24411cd552
fe6620ea16b755697a4fc5e6e9d0cfc0
c5c4a1874685429046a424c026db672e
4c2c492898052ba59128d46200b40f88
0027a8b6610a4d559bdc9346d33a0a6b
08e75c7fd43192b162bfd0aef0c716b3
1584827693f676f9a5047123466f0654
eade34972586b31c6ce7e395f4b478cb
-----END OpenVPN Static key V1-----
</tls-auth>
2020-07-29 14:21:36,373 DEBG 'start-script' stdout output:
[info] Default route for container is 172.17.0.1

2020-07-29 14:21:36,376 DEBG 'start-script' stdout output:
[info] Adding 209.222.18.222 to /etc/resolv.conf

2020-07-29 14:21:36,382 DEBG 'start-script' stdout output:
[info] Adding 84.200.69.80 to /etc/resolv.conf

2020-07-29 14:21:36,386 DEBG 'start-script' stdout output:
[info] Adding 37.235.1.174 to /etc/resolv.conf

2020-07-29 14:21:36,389 DEBG 'start-script' stdout output:
[info] Adding 1.1.1.1 to /etc/resolv.conf

2020-07-29 14:21:36,392 DEBG 'start-script' stdout output:
[info] Adding 209.222.18.218 to /etc/resolv.conf

2020-07-29 14:21:36,395 DEBG 'start-script' stdout output:
[info] Adding 37.235.1.177 to /etc/resolv.conf

2020-07-29 14:21:36,399 DEBG 'start-script' stdout output:
[info] Adding 84.200.70.40 to /etc/resolv.conf

2020-07-29 14:21:36,403 DEBG 'start-script' stdout output:
[info] Adding 1.0.0.1 to /etc/resolv.conf

2020-07-29 14:21:36,456 DEBG 'start-script' stdout output:
[debug] Show name servers defined for container

2020-07-29 14:21:36,456 DEBG 'start-script' stdout output:
nameserver 209.222.18.222
nameserver 84.200.69.80
nameserver 37.235.1.174
nameserver 1.1.1.1
nameserver 209.222.18.218
nameserver 37.235.1.177
nameserver 84.200.70.40
nameserver 1.0.0.1

2020-07-29 14:21:36,456 DEBG 'start-script' stdout output:
[debug] Show name resolution for VPN endpoint ams-193.whiskergalaxy.com

2020-07-29 14:21:36,479 DEBG 'start-script' stdout output:
;; ->>HEADER<<- opcode: QUERY, rcode: NOERROR, id: 55276
;; flags: qr rd ra ; QUERY: 1, ANSWER: 1, AUTHORITY: 0, ADDITIONAL: 0
;; QUESTION SECTION:
;; ams-193.whiskergalaxy.com. IN A

;; ANSWER SECTION:
ams-193.whiskergalaxy.com. 300 IN A 84.17.46.2

;; AUTHORITY SECTION:

;; ADDITIONAL SECTION:

;; Query time: 21 msec
;; SERVER: 1.1.1.1
;; WHEN: Wed Jul 29 14:21:36 2020
;; MSG SIZE rcvd: 84

2020-07-29 14:21:36,480 DEBG 'start-script' stdout output:
[debug] Show contents of hosts file

2020-07-29 14:21:36,480 DEBG 'start-script' stdout output:
127.0.0.1 localhost
::1 localhost ip6-localhost ip6-loopback
fe00::0 ip6-localnet
ff00::0 ip6-mcastprefix
ff02::1 ip6-allnodes
ff02::2 ip6-allrouters
172.17.0.2 54508df6b423
84.17.46.2 ams-193.whiskergalaxy.com

2020-07-29 14:21:36,484 DEBG 'start-script' stdout output:
[debug] Docker interface defined as eth0

2020-07-29 14:21:36,487 DEBG 'start-script' stdout output:
[debug] Docker IP defined as 172.17.0.2

2020-07-29 14:21:36,490 DEBG 'start-script' stdout output:
[debug] Docker netmask defined as 255.255.0.0

2020-07-29 14:21:36,498 DEBG 'start-script' stdout output:
[info] Docker network defined as 172.17.0.0/16

2020-07-29 14:21:36,501 DEBG 'start-script' stdout output:
[info] Adding 192.168.178.0/24 as route via docker eth0

2020-07-29 14:21:36,502 DEBG 'start-script' stdout output:
[info] ip route defined as follows...
--------------------

2020-07-29 14:21:36,503 DEBG 'start-script' stdout output:
default via 172.17.0.1 dev eth0
172.17.0.0/16 dev eth0 proto kernel scope link src 172.17.0.2
192.168.178.0/24 via 172.17.0.1 dev eth0

2020-07-29 14:21:36,503 DEBG 'start-script' stdout output:
--------------------
[debug] Modules currently loaded for kernel

2020-07-29 14:21:36,506 DEBG 'start-script' stdout output:
Module Size Used by
xt_nat 16384 5
veth 20480 0
vhost_net 24576 0
tun 36864 1 vhost_net
vhost 32768 1 vhost_net
tap 20480 1 vhost_net
kvm_intel 196608 0
kvm 380928 1 kvm_intel
xt_CHECKSUM 16384 0
ipt_REJECT 16384 0
ip6table_mangle 16384 1
ip6table_nat 16384 1
nf_nat_ipv6 16384 1 ip6table_nat
iptable_mangle 16384 1
ip6table_filter 16384 1
ip6_tables 24576 3 ip6table_filter,ip6table_nat,ip6table_mangle
ipt_MASQUERADE 16384 6
iptable_filter 16384 1
iptable_nat 16384 1
nf_nat_ipv4 16384 2 ipt_MASQUERADE,iptable_nat
nf_nat 24576 3 nf_nat_ipv6,nf_nat_ipv4,xt_nat
ip_tables 24576 3 iptable_filter,iptable_nat,iptable_mangle
xfs 663552 2
md_mod 49152 2
bonding 110592 0
x86_pkg_temp_thermal 16384 0
intel_powerclamp 16384 0
coretemp 16384 0
crct10dif_pclmul 16384 0
crc32_pclmul 16384 0
crc32c_intel 24576 0
ghash_clmulni_intel 16384 0
pcbc 16384 0
aesni_intel 200704 0
aes_x86_64 20480 1 aesni_intel
crypto_simd 16384 1 aesni_intel
cryptd 20480 3 crypto_simd,ghash_clmulni_intel,aesni_intel
glue_helper 16384 1 aesni_intel
r8169 69632 0
wmi_bmof 16384 0
i2c_i801 24576 0
i2c_core 40960 1 i2c_i801
intel_cstate 16384 0
intel_uncore 102400 0
intel_rapl_perf 16384 0
realtek 20480 0
pcc_cpufreq 16384 0
video 40960 0
button 16384 0
thermal 20480 0
fan 16384 0
mpt3sas 229376 4
backlight 16384 1 video
wmi 20480 1 wmi_bmof
raid_class 16384 1 mpt3sas
scsi_transport_sas 32768 1 mpt3sas

2020-07-29 14:21:36,510 DEBG 'start-script' stdout output:
iptable_mangle 16384 1
ip_tables 24576 3 iptable_filter,iptable_nat,iptable_mangle

2020-07-29 14:21:36,511 DEBG 'start-script' stdout output:
[info] iptable_mangle support detected, adding fwmark for tables

2020-07-29 14:21:36,541 DEBG 'start-script' stdout output:
[info] iptables defined as follows...
--------------------

2020-07-29 14:21:36,542 DEBG 'start-script' stdout output:
-P INPUT DROP
-P FORWARD ACCEPT
-P OUTPUT DROP
-A INPUT -i tun0 -j ACCEPT
-A INPUT -s 172.17.0.0/16 -d 172.17.0.0/16 -j ACCEPT
-A INPUT -i eth0 -p udp -m udp --sport 443 -j ACCEPT
-A INPUT -i eth0 -p tcp -m tcp --dport 8112 -j ACCEPT
-A INPUT -i eth0 -p tcp -m tcp --sport 8112 -j ACCEPT
-A INPUT -s 192.168.178.0/24 -i eth0 -p tcp -m tcp --dport 58846 -j ACCEPT
-A INPUT -p icmp -m icmp --icmp-type 0 -j ACCEPT
-A INPUT -i lo -j ACCEPT
-A OUTPUT -o tun0 -j ACCEPT
-A OUTPUT -s 172.17.0.0/16 -d 172.17.0.0/16 -j ACCEPT
-A OUTPUT -o eth0 -p udp -m udp --dport 443 -j ACCEPT
-A OUTPUT -o eth0 -p tcp -m tcp --dport 8112 -j ACCEPT
-A OUTPUT -o eth0 -p tcp -m tcp --sport 8112 -j ACCEPT
-A OUTPUT -d 192.168.178.0/24 -o eth0 -p tcp -m tcp --sport 58846 -j ACCEPT
-A OUTPUT -p icmp -m icmp --icmp-type 8 -j ACCEPT
-A OUTPUT -o lo -j ACCEPT

2020-07-29 14:21:36,543 DEBG 'start-script' stdout output:
--------------------

2020-07-29 14:21:36,543 DEBG 'start-script' stdout output:
[debug] OpenVPN command line:- /usr/bin/openvpn --daemon --reneg-sec 0 --mute-replay-warnings --auth-nocache --setenv VPN_PROV 'custom' --setenv DEBUG 'true' --setenv VPN_DEVICE_TYPE 'tun0' --setenv VPN_REMOTE 'ams-193.whiskergalaxy.com' --script-security 2 --writepid /root/openvpn.pid --remap-usr1 SIGHUP --log-append /dev/stdout --pull-filter ignore 'up' --pull-filter ignore 'down' --pull-filter ignore 'route-ipv6' --pull-filter ignore 'ifconfig-ipv6' --pull-filter ignore 'tun-ipv6' --pull-filter ignore 'persist-tun' --pull-filter ignore 'reneg-sec' --remote 84.17.46.2 443 udp --remote-random --up /root/openvpnup.sh --up-delay --up-restart --keepalive 10 60 --auth-user-pass credentials.conf --cd /config/openvpn --config '/config/openvpn/Windscribe-Amsterdam-Tulip.ovpn'

2020-07-29 14:21:36,544 DEBG 'start-script' stdout output:
[info] Starting OpenVPN...

2020-07-29 14:21:36,559 DEBG 'start-script' stdout output:
Wed Jul 29 14:21:36 2020 WARNING: file 'credentials.conf' is group or others accessible


2020-07-29 14:21:36,559 DEBG 'start-script' stdout output:
Wed Jul 29 14:21:36 2020 OpenVPN 2.4.7 [git:makepkg/2b8aec62d5db2c17+] x86_64-pc-linux-gnu [SSL (OpenSSL)] [LZO] [LZ4] [EPOLL] [PKCS11] [MH/PKTINFO] [AEAD] built on Feb 19 2019
Wed Jul 29 14:21:36 2020 library versions: OpenSSL 1.1.1b 26 Feb 2019, LZO 2.10

2020-07-29 14:21:36,560 DEBG 'start-script' stdout output:
Wed Jul 29 14:21:36 2020 NOTE: the current --script-security setting may allow this configuration to call user-defined scripts

2020-07-29 14:21:36,560 DEBG 'start-script' stdout output:
[info] OpenVPN started

2020-07-29 14:21:36,560 DEBG 'start-script' stdout output:
[debug] Waiting for valid IP address from tunnel...
Wed Jul 29 14:21:36 2020 Outgoing Control Channel Authentication: Using 512 bit message hash 'SHA512' for HMAC authentication
Wed Jul 29 14:21:36 2020 Incoming Control Channel Authentication: Using 512 bit message hash 'SHA512' for HMAC authentication

2020-07-29 14:21:36,561 DEBG 'start-script' stdout output:
Wed Jul 29 14:21:36 2020 TCP/UDP: Preserving recently used remote address: [AF_INET]84.17.46.2:443
Wed Jul 29 14:21:36 2020 UDP link local: (not bound)
Wed Jul 29 14:21:36 2020 UDP link remote: [AF_INET]84.17.46.2:443

2020-07-29 14:21:36,637 DEBG 'start-script' stdout output:
Wed Jul 29 14:21:36 2020 VERIFY OK: depth=1, C=CA, ST=ON, L=Toronto, O=Windscribe Limited, OU=Operations, CN=Windscribe Node CA

2020-07-29 14:21:36,638 DEBG 'start-script' stdout output:
Wed Jul 29 14:21:36 2020 VERIFY KU OK
Wed Jul 29 14:21:36 2020 Validating certificate extended key usage
Wed Jul 29 14:21:36 2020 ++ Certificate has EKU (str) TLS Web Server Authentication, expects TLS Web Server Authentication
Wed Jul 29 14:21:36 2020 VERIFY EKU OK
Wed Jul 29 14:21:36 2020 VERIFY OK: depth=0, C=CA, ST=ON, O=Windscribe Limited, OU=Operations, CN=Windscribe Node Server 4096

2020-07-29 14:21:36,717 DEBG 'start-script' stdout output:
Wed Jul 29 14:21:36 2020 WARNING: 'link-mtu' is used inconsistently, local='link-mtu 1602', remote='link-mtu 1550'

Wed Jul 29 14:21:36 2020 WARNING: 'cipher' is used inconsistently, local='cipher AES-256-CBC', remote='cipher AES-256-GCM'

Wed Jul 29 14:21:36 2020 WARNING: 'auth' is used inconsistently, local='auth SHA512', remote='auth [null-digest]'


2020-07-29 14:21:36,718 DEBG 'start-script' stdout output:
Wed Jul 29 14:21:36 2020 Control Channel: TLSv1.2, cipher TLSv1.2 ECDHE-RSA-AES256-GCM-SHA384, 4096 bit RSA
Wed Jul 29 14:21:36 2020 [Windscribe Node Server 4096] Peer Connection Initiated with [AF_INET]84.17.46.2:443

2020-07-29 14:21:37,884 DEBG 'start-script' stdout output:
Wed Jul 29 14:21:37 2020 AUTH: Received control message: AUTH_FAILED

2020-07-29 14:21:37,884 DEBG 'start-script' stdout output:
Wed Jul 29 14:21:37 2020 SIGTERM[soft,auth-failure] received, process exiting

 

Link to post
  • Replies 8.7k
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Popular Posts

OK guys, multi remote endpoint support is now in for this image please pull down the new image (this change will be rolled out to all my vpn images shortly).   What this means is that the im

There has been an issue raised on GitHub related to tracker announce request IP leakage under certain circumstances, after careful review of iptables i have tightened up the rules to prevent this. A n

I wanted to summarize how I got Mullvad working with DelugeVPN as I had to piece together several "solutions" from different comments in this thread and there was some incorrect info; likely old.

Posted Images

34 minutes ago, 1q8448q1 said:

I can not acces the webui.

Read all the possible FAQs.

 

Heres the log:


ErrorWarningSystemArrayLogin


VPN_PORT=443
VPN_PROTOCOL=udp
VPN_PROV=custom
VPN_REMOTE=ams-193.whiskergalaxy.com
VPN_USER=********
_='[debug] Environment variables defined as follows'
[debug] Directory listing of files in /config/openvpn as follows

2020-07-29 14:21:36,290 DEBG 'watchdog-script' stderr output:
dos2unix: converting file /config/core.conf to Unix format...

2020-07-29 14:21:36,292 DEBG 'watchdog-script' stdout output:
[debug] Waiting for valid IP address from tunnel...

2020-07-29 14:21:36,295 DEBG 'start-script' stdout output:
total 8
drwxrwxr-x 1 nobody users 0 Jul 29 14:21 .
drwxrwxr-x 1 nobody users 32 Jul 29 14:21 ..
-rwxrwxr-x 1 nobody users 23 Jul 29 14:19 credentials.conf
-rwxrwxr-x 1 nobody users 2975 Jul 29 14:21 Windscribe-Amsterdam-Tulip.ovpn

2020-07-29 14:21:36,355 DEBG 'start-script' stdout output:
[debug] Contents of ovpn file /config/openvpn/Windscribe-Amsterdam-Tulip.ovpn as follows...

2020-07-29 14:21:36,360 DEBG 'start-script' stdout output:
remote ams-193.whiskergalaxy.com 443
client
dev tun

p

nobind
auth-user-pass credentials.conf

resolv-retry infinite

auth SHA512
cipher AES-256-CBC
comp-lzo
verb 2
mute-replay-warnings
remote-cert-tls server
persist-key

key-direction 1
<ca>
-----BEGIN CERTIFICATE-----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-----END CERTIFICATE-----
</ca>
<tls-auth>
-----BEGIN OpenVPN Static key V1-----
5801926a57ac2ce27e3dfd1dd6ef8204
2d82bd4f3f0021296f57734f6f1ea714
a6623845541c4b0c3dea0a050fe6746c
b66dfab14cda27e5ae09d7c155aa554f
399fa4a863f0e8c1af787e5c602a801d
3a2ec41e395a978d56729457fe6102d7
d9e9119aa83643210b33c678f9d4109e
3154ac9c759e490cb309b319cf708cae
83ddadc3060a7a26564d1a24411cd552
fe6620ea16b755697a4fc5e6e9d0cfc0
c5c4a1874685429046a424c026db672e
4c2c492898052ba59128d46200b40f88
0027a8b6610a4d559bdc9346d33a0a6b
08e75c7fd43192b162bfd0aef0c716b3
1584827693f676f9a5047123466f0654
eade34972586b31c6ce7e395f4b478cb
-----END OpenVPN Static key V1-----
</tls-auth>
2020-07-29 14:21:36,373 DEBG 'start-script' stdout output:
[info] Default route for container is 172.17.0.1

2020-07-29 14:21:36,376 DEBG 'start-script' stdout output:
[info] Adding 209.222.18.222 to /etc/resolv.conf

2020-07-29 14:21:36,382 DEBG 'start-script' stdout output:
[info] Adding 84.200.69.80 to /etc/resolv.conf

2020-07-29 14:21:36,386 DEBG 'start-script' stdout output:
[info] Adding 37.235.1.174 to /etc/resolv.conf

2020-07-29 14:21:36,389 DEBG 'start-script' stdout output:
[info] Adding 1.1.1.1 to /etc/resolv.conf

2020-07-29 14:21:36,392 DEBG 'start-script' stdout output:
[info] Adding 209.222.18.218 to /etc/resolv.conf

2020-07-29 14:21:36,395 DEBG 'start-script' stdout output:
[info] Adding 37.235.1.177 to /etc/resolv.conf

2020-07-29 14:21:36,399 DEBG 'start-script' stdout output:
[info] Adding 84.200.70.40 to /etc/resolv.conf

2020-07-29 14:21:36,403 DEBG 'start-script' stdout output:
[info] Adding 1.0.0.1 to /etc/resolv.conf

2020-07-29 14:21:36,456 DEBG 'start-script' stdout output:
[debug] Show name servers defined for container

2020-07-29 14:21:36,456 DEBG 'start-script' stdout output:
nameserver 209.222.18.222
nameserver 84.200.69.80
nameserver 37.235.1.174
nameserver 1.1.1.1
nameserver 209.222.18.218
nameserver 37.235.1.177
nameserver 84.200.70.40
nameserver 1.0.0.1

2020-07-29 14:21:36,456 DEBG 'start-script' stdout output:
[debug] Show name resolution for VPN endpoint ams-193.whiskergalaxy.com

2020-07-29 14:21:36,479 DEBG 'start-script' stdout output:
;; ->>HEADER<<- opcode: QUERY, rcode: NOERROR, id: 55276
;; flags: qr rd ra ; QUERY: 1, ANSWER: 1, AUTHORITY: 0, ADDITIONAL: 0
;; QUESTION SECTION:
;; ams-193.whiskergalaxy.com. IN A

;; ANSWER SECTION:
ams-193.whiskergalaxy.com. 300 IN A 84.17.46.2

;; AUTHORITY SECTION:

;; ADDITIONAL SECTION:

;; Query time: 21 msec
;; SERVER: 1.1.1.1
;; WHEN: Wed Jul 29 14:21:36 2020
;; MSG SIZE rcvd: 84

2020-07-29 14:21:36,480 DEBG 'start-script' stdout output:
[debug] Show contents of hosts file

2020-07-29 14:21:36,480 DEBG 'start-script' stdout output:
127.0.0.1 localhost
::1 localhost ip6-localhost ip6-loopback
fe00::0 ip6-localnet
ff00::0 ip6-mcastprefix
ff02::1 ip6-allnodes
ff02::2 ip6-allrouters
172.17.0.2 54508df6b423
84.17.46.2 ams-193.whiskergalaxy.com

2020-07-29 14:21:36,484 DEBG 'start-script' stdout output:
[debug] Docker interface defined as eth0

2020-07-29 14:21:36,487 DEBG 'start-script' stdout output:
[debug] Docker IP defined as 172.17.0.2

2020-07-29 14:21:36,490 DEBG 'start-script' stdout output:
[debug] Docker netmask defined as 255.255.0.0

2020-07-29 14:21:36,498 DEBG 'start-script' stdout output:
[info] Docker network defined as 172.17.0.0/16

2020-07-29 14:21:36,501 DEBG 'start-script' stdout output:
[info] Adding 192.168.178.0/24 as route via docker eth0

2020-07-29 14:21:36,502 DEBG 'start-script' stdout output:
[info] ip route defined as follows...
--------------------

2020-07-29 14:21:36,503 DEBG 'start-script' stdout output:
default via 172.17.0.1 dev eth0
172.17.0.0/16 dev eth0 proto kernel scope link src 172.17.0.2
192.168.178.0/24 via 172.17.0.1 dev eth0

2020-07-29 14:21:36,503 DEBG 'start-script' stdout output:
--------------------
[debug] Modules currently loaded for kernel

2020-07-29 14:21:36,506 DEBG 'start-script' stdout output:
Module Size Used by
xt_nat 16384 5
veth 20480 0
vhost_net 24576 0
tun 36864 1 vhost_net
vhost 32768 1 vhost_net
tap 20480 1 vhost_net
kvm_intel 196608 0
kvm 380928 1 kvm_intel
xt_CHECKSUM 16384 0
ipt_REJECT 16384 0
ip6table_mangle 16384 1
ip6table_nat 16384 1
nf_nat_ipv6 16384 1 ip6table_nat
iptable_mangle 16384 1
ip6table_filter 16384 1
ip6_tables 24576 3 ip6table_filter,ip6table_nat,ip6table_mangle
ipt_MASQUERADE 16384 6
iptable_filter 16384 1
iptable_nat 16384 1
nf_nat_ipv4 16384 2 ipt_MASQUERADE,iptable_nat
nf_nat 24576 3 nf_nat_ipv6,nf_nat_ipv4,xt_nat
ip_tables 24576 3 iptable_filter,iptable_nat,iptable_mangle
xfs 663552 2
md_mod 49152 2
bonding 110592 0
x86_pkg_temp_thermal 16384 0
intel_powerclamp 16384 0
coretemp 16384 0
crct10dif_pclmul 16384 0
crc32_pclmul 16384 0
crc32c_intel 24576 0
ghash_clmulni_intel 16384 0
pcbc 16384 0
aesni_intel 200704 0
aes_x86_64 20480 1 aesni_intel
crypto_simd 16384 1 aesni_intel
cryptd 20480 3 crypto_simd,ghash_clmulni_intel,aesni_intel
glue_helper 16384 1 aesni_intel
r8169 69632 0
wmi_bmof 16384 0
i2c_i801 24576 0
i2c_core 40960 1 i2c_i801
intel_cstate 16384 0
intel_uncore 102400 0
intel_rapl_perf 16384 0
realtek 20480 0
pcc_cpufreq 16384 0
video 40960 0
button 16384 0
thermal 20480 0
fan 16384 0
mpt3sas 229376 4
backlight 16384 1 video
wmi 20480 1 wmi_bmof
raid_class 16384 1 mpt3sas
scsi_transport_sas 32768 1 mpt3sas

2020-07-29 14:21:36,510 DEBG 'start-script' stdout output:
iptable_mangle 16384 1
ip_tables 24576 3 iptable_filter,iptable_nat,iptable_mangle

2020-07-29 14:21:36,511 DEBG 'start-script' stdout output:
[info] iptable_mangle support detected, adding fwmark for tables

2020-07-29 14:21:36,541 DEBG 'start-script' stdout output:
[info] iptables defined as follows...
--------------------

2020-07-29 14:21:36,542 DEBG 'start-script' stdout output:
-P INPUT DROP
-P FORWARD ACCEPT
-P OUTPUT DROP
-A INPUT -i tun0 -j ACCEPT
-A INPUT -s 172.17.0.0/16 -d 172.17.0.0/16 -j ACCEPT
-A INPUT -i eth0 -p udp -m udp --sport 443 -j ACCEPT
-A INPUT -i eth0 -p tcp -m tcp --dport 8112 -j ACCEPT
-A INPUT -i eth0 -p tcp -m tcp --sport 8112 -j ACCEPT
-A INPUT -s 192.168.178.0/24 -i eth0 -p tcp -m tcp --dport 58846 -j ACCEPT
-A INPUT -p icmp -m icmp --icmp-type 0 -j ACCEPT
-A INPUT -i lo -j ACCEPT
-A OUTPUT -o tun0 -j ACCEPT
-A OUTPUT -s 172.17.0.0/16 -d 172.17.0.0/16 -j ACCEPT
-A OUTPUT -o eth0 -p udp -m udp --dport 443 -j ACCEPT
-A OUTPUT -o eth0 -p tcp -m tcp --dport 8112 -j ACCEPT
-A OUTPUT -o eth0 -p tcp -m tcp --sport 8112 -j ACCEPT
-A OUTPUT -d 192.168.178.0/24 -o eth0 -p tcp -m tcp --sport 58846 -j ACCEPT
-A OUTPUT -p icmp -m icmp --icmp-type 8 -j ACCEPT
-A OUTPUT -o lo -j ACCEPT

2020-07-29 14:21:36,543 DEBG 'start-script' stdout output:
--------------------

2020-07-29 14:21:36,543 DEBG 'start-script' stdout output:
[debug] OpenVPN command line:- /usr/bin/openvpn --daemon --reneg-sec 0 --mute-replay-warnings --auth-nocache --setenv VPN_PROV 'custom' --setenv DEBUG 'true' --setenv VPN_DEVICE_TYPE 'tun0' --setenv VPN_REMOTE 'ams-193.whiskergalaxy.com' --script-security 2 --writepid /root/openvpn.pid --remap-usr1 SIGHUP --log-append /dev/stdout --pull-filter ignore 'up' --pull-filter ignore 'down' --pull-filter ignore 'route-ipv6' --pull-filter ignore 'ifconfig-ipv6' --pull-filter ignore 'tun-ipv6' --pull-filter ignore 'persist-tun' --pull-filter ignore 'reneg-sec' --remote 84.17.46.2 443 udp --remote-random --up /root/openvpnup.sh --up-delay --up-restart --keepalive 10 60 --auth-user-pass credentials.conf --cd /config/openvpn --config '/config/openvpn/Windscribe-Amsterdam-Tulip.ovpn'

2020-07-29 14:21:36,544 DEBG 'start-script' stdout output:
[info] Starting OpenVPN...

2020-07-29 14:21:36,559 DEBG 'start-script' stdout output:
Wed Jul 29 14:21:36 2020 WARNING: file 'credentials.conf' is group or others accessible


2020-07-29 14:21:36,559 DEBG 'start-script' stdout output:
Wed Jul 29 14:21:36 2020 OpenVPN 2.4.7 [git:makepkg/2b8aec62d5db2c17+] x86_64-pc-linux-gnu [SSL (OpenSSL)] [LZO] [LZ4] [EPOLL] [PKCS11] [MH/PKTINFO] [AEAD] built on Feb 19 2019
Wed Jul 29 14:21:36 2020 library versions: OpenSSL 1.1.1b 26 Feb 2019, LZO 2.10

2020-07-29 14:21:36,560 DEBG 'start-script' stdout output:
Wed Jul 29 14:21:36 2020 NOTE: the current --script-security setting may allow this configuration to call user-defined scripts

2020-07-29 14:21:36,560 DEBG 'start-script' stdout output:
[info] OpenVPN started

2020-07-29 14:21:36,560 DEBG 'start-script' stdout output:
[debug] Waiting for valid IP address from tunnel...
Wed Jul 29 14:21:36 2020 Outgoing Control Channel Authentication: Using 512 bit message hash 'SHA512' for HMAC authentication
Wed Jul 29 14:21:36 2020 Incoming Control Channel Authentication: Using 512 bit message hash 'SHA512' for HMAC authentication

2020-07-29 14:21:36,561 DEBG 'start-script' stdout output:
Wed Jul 29 14:21:36 2020 TCP/UDP: Preserving recently used remote address: [AF_INET]84.17.46.2:443
Wed Jul 29 14:21:36 2020 UDP link local: (not bound)
Wed Jul 29 14:21:36 2020 UDP link remote: [AF_INET]84.17.46.2:443

2020-07-29 14:21:36,637 DEBG 'start-script' stdout output:
Wed Jul 29 14:21:36 2020 VERIFY OK: depth=1, C=CA, ST=ON, L=Toronto, O=Windscribe Limited, OU=Operations, CN=Windscribe Node CA

2020-07-29 14:21:36,638 DEBG 'start-script' stdout output:
Wed Jul 29 14:21:36 2020 VERIFY KU OK
Wed Jul 29 14:21:36 2020 Validating certificate extended key usage
Wed Jul 29 14:21:36 2020 ++ Certificate has EKU (str) TLS Web Server Authentication, expects TLS Web Server Authentication
Wed Jul 29 14:21:36 2020 VERIFY EKU OK
Wed Jul 29 14:21:36 2020 VERIFY OK: depth=0, C=CA, ST=ON, O=Windscribe Limited, OU=Operations, CN=Windscribe Node Server 4096

2020-07-29 14:21:36,717 DEBG 'start-script' stdout output:
Wed Jul 29 14:21:36 2020 WARNING: 'link-mtu' is used inconsistently, local='link-mtu 1602', remote='link-mtu 1550'

Wed Jul 29 14:21:36 2020 WARNING: 'cipher' is used inconsistently, local='cipher AES-256-CBC', remote='cipher AES-256-GCM'

Wed Jul 29 14:21:36 2020 WARNING: 'auth' is used inconsistently, local='auth SHA512', remote='auth [null-digest]'


2020-07-29 14:21:36,718 DEBG 'start-script' stdout output:
Wed Jul 29 14:21:36 2020 Control Channel: TLSv1.2, cipher TLSv1.2 ECDHE-RSA-AES256-GCM-SHA384, 4096 bit RSA
Wed Jul 29 14:21:36 2020 [Windscribe Node Server 4096] Peer Connection Initiated with [AF_INET]84.17.46.2:443

2020-07-29 14:21:37,884 DEBG 'start-script' stdout output:
Wed Jul 29 14:21:37 2020 AUTH: Received control message: AUTH_FAILED

2020-07-29 14:21:37,884 DEBG 'start-script' stdout output:
Wed Jul 29 14:21:37 2020 SIGTERM[soft,auth-failure] received, process exiting

 

Second to last line. AUTH_FAILED.  Check to make sure your username and password are correct. 

Link to post
I just started using deluge (and unraid) yesterday but I have some behaviour that seems odd to me and I'm hoping someone can help out.
1. When I enabled a plugin (label) and restart the docker for any reason, the plugin disables and has to be reenabled. Its frustrating but not the end of the world. Is this behaviour normal, it seems like it should keep any plugin enabled.
2. I can't add a plugin. I want to add a copy plugin and no matter what I do (use the plugin section of the UI or even drop it into the plugin folder) nothing happens. The plugin doesn't appear and even restarting the docker doesn't change anything which brings back up 1 above.
 
Can someone suggest how to solve both of these issues please. I can't be the first person to ever have this happen. Maybe I missed something when setting up unraid. Do I need something else installed that I don't have?

See Q4 here: https://github.com/binhex/documentation/blob/master/docker/faq/delugevpn.md


Sent from my iPhone using Tapatalk
Link to post
7 minutes ago, 1q8448q1 said:

thx. I tripple checked them. They are 100% correct. (I'm talking about the vpn ones)

Make sure to only use characters A-Z,a-z,0-9 in your username/pw. Special characters can cause authentication issues. Also make sure you're within your providers device limit. Usually they allow 1-x devices and anything over that will fail to authenticate.  

Link to post
9 hours ago, Jorgen said:


See Q4 here: https://github.com/binhex/documentation/blob/master/docker/faq/delugevpn.md


Sent from my iPhone using Tapatalk

Thanks for that. I'm still left with not being able to add a plugin. According to Q3 I should put it in the "/config/plugins/" folder. I can't find this however I would expect it refers to "/mnt/user/appdata/binhex-delugevpn". If this is not right, where else can it be? I have gone with this folder as when I select to upload a plugin through the UI, once I select the egg file it goes into the pop up the file name displays as "[object FileList]". If I check the folder before and after uploading a file with that name appears in that folder and the plugin still does not appear even after a restart of the docker.

 

I've also manually added the file to that folder leaving it with both the correct file name and the object name above and again, it never displays within Deluge.

Link to post
11 minutes ago, muttly.irl said:

According to Q3 I should put it in the "/config/plugins/" folder. I can't find this however I would expect it refers to "/mnt/user/appdata/binhex-delugevpn". If this is not right, where else can it be?

If you edit your Deluge Docker and search for where /config is defined (you may need to click on "show more settings") - that is where it is referring to.  Sounds like it's mapping to where you're talking about, but wanted to clarify what it means.

Link to post

Never mind. I found the problem. I was using the plugin from the guide, it was for the wrong version of python. Correct version installed and its working fine.

47 minutes ago, muttly.irl said:

Thanks for that. I'm still left with not being able to add a plugin. According to Q3 I should put it in the "/config/plugins/" folder. I can't find this however I would expect it refers to "/mnt/user/appdata/binhex-delugevpn". If this is not right, where else can it be? I have gone with this folder as when I select to upload a plugin through the UI, once I select the egg file it goes into the pop up the file name displays as "[object FileList]". If I check the folder before and after uploading a file with that name appears in that folder and the plugin still does not appear even after a restart of the docker.

 

I've also manually added the file to that folder leaving it with both the correct file name and the object name above and again, it never displays within Deluge.

 

Edited by muttly.irl
I can't spell
Link to post
4 hours ago, SeattleBandit said:

did PIA's france..... server go down?  its not completing connections after my latest reboot - no changes on my end

 

 

 

Mine's stopped connecting to the swiss pia server, also without any known changes. The PIA desktop client connects to both, though. ¯\_(ツ)_/¯

Link to post

Hope someone can help as I am pulling my hair out.

I got home this afternoon and discovered that my Unraid was turned off, "power outage" so I power up and discovered that my Delugevpn was not working, I have checked all the settings and I can't find out what i wrong.

 

during my testing it looks like everything works apart from my VPN, that I am able to use the Privoxy with no issues, I am able to download, but when I enable the the VPN I get the following error message   This site can't be reached, but if I turn off the VPN then I am able to access it.

I also discovered that when the VPN is turn on and I go into the console, and type in curl ifconfig.me/ip  I get the an IP address from my VPN.

 

can someone please help me in resolving this issue,

 

ps.  I am using the France server 

 

update. I just looked at my logs and I am getting this:

 

info] Starting Deluge Web UI...

reated by...
___. .__ .__
\_ |__ |__| ____ | |__ ____ ___ ___
| __ \| |/ \| | \_/ __ \\ \/ /
| \_\ \ | | \ Y \ ___/ > <
|___ /__|___| /___| /\___ >__/\_ \
\/ \/ \/ \/ \/
https://hub.docker.com/u/binhex/

2020-07-31 07:27:49.851286 [info] System information Linux 988c501038b9 4.19.107-Unraid #1 SMP Thu Mar 5 13:55:57 PST 2020 x86_64 GNU/Linux
2020-07-31 07:27:49.877842 [info] OS_ARCH defined as 'x86-64'
2020-07-31 07:27:49.903810 [info] PUID defined as '99'
2020-07-31 07:27:49.934316 [info] PGID defined as '100'
2020-07-31 07:27:50.363320 [info] UMASK defined as '000'
2020-07-31 07:27:50.390297 [info] Permissions already set for volume mappings
2020-07-31 07:27:50.421909 [info] DELUGE_DAEMON_LOG_LEVEL defined as 'info'
2020-07-31 07:27:50.449086 [info] DELUGE_WEB_LOG_LEVEL defined as 'info'
2020-07-31 07:27:50.476288 [info] VPN_ENABLED defined as 'yes'
2020-07-31 07:27:50.509369 [info] OpenVPN config file (ovpn extension) is located at /config/openvpn/France.ovpn
2020-07-31 07:27:50.569269 [info] VPN remote line defined as 'remote france.privateinternetaccess.com 1198'
2020-07-31 07:27:50.596495 [info] VPN_REMOTE defined as 'france.privateinternetaccess.com'
2020-07-31 07:27:50.623768 [info] VPN_PORT defined as '1198'
2020-07-31 07:27:50.658012 [info] VPN_PROTOCOL defined as 'udp'
2020-07-31 07:27:50.685234 [info] VPN_DEVICE_TYPE defined as 'tun0'
2020-07-31 07:27:50.713661 [info] VPN_PROV defined as 'pia'
2020-07-31 07:27:50.738834 [info] LAN_NETWORK defined as '192.168.0.0/24'
2020-07-31 07:27:50.765984 [info] NAME_SERVERS defined as '209.222.18.222,84.200.69.80,37.235.1.174,1.1.1.1,209.222.18.218,37.235.1.177,84.200.70.40,1.0.0.1'
2020-07-31 07:27:50.795770 [info] VPN_USER defined as 'P2420957'
2020-07-31 07:27:50.829415 [info] VPN_PASS defined as 'Wa7chd1ce3st0lenDann3Wat3h'
2020-07-31 07:27:50.857389 [info] VPN_OPTIONS not defined (via -e VPN_OPTIONS)
2020-07-31 07:27:50.885146 [info] STRICT_PORT_FORWARD defined as 'yes'
2020-07-31 07:27:50.910273 [info] ENABLE_PRIVOXY defined as 'yes'
2020-07-31 07:27:50.939801 [info] ADDITIONAL_PORTS not defined (via -e ADDITIONAL_PORTS), skipping allow for custom incoming ports
2020-07-31 07:27:50.970733 [info] Deleting files in /tmp (non recursive)...
2020-07-31 07:27:50.995213 [info] Starting Supervisor...
2020-07-31 07:27:51,132 INFO Included extra file "/etc/supervisor/conf.d/delugevpn.conf" during parsing
2020-07-31 07:27:51,132 INFO Set uid to user 0 succeeded
2020-07-31 07:27:51,134 INFO supervisord started with pid 6
2020-07-31 07:27:52,137 INFO spawned: 'start-script' with pid 172
2020-07-31 07:27:52,138 INFO spawned: 'watchdog-script' with pid 173
2020-07-31 07:27:52,139 INFO reaped unknown pid 7 (exit status 0)
2020-07-31 07:27:52,144 DEBG 'start-script' stdout output:
[info] VPN is enabled, beginning configuration of VPN

2020-07-31 07:27:52,144 INFO success: start-script entered RUNNING state, process has stayed up for > than 0 seconds (startsecs)
2020-07-31 07:27:52,144 INFO success: watchdog-script entered RUNNING state, process has stayed up for > than 0 seconds (startsecs)
2020-07-31 07:27:52,200 DEBG 'start-script' stdout output:
[info] Default route for container is 172.17.0.1

2020-07-31 07:27:52,205 DEBG 'start-script' stdout output:
[info] Adding 209.222.18.222 to /etc/resolv.conf

2020-07-31 07:27:52,211 DEBG 'start-script' stdout output:
[info] Adding 84.200.69.80 to /etc/resolv.conf

2020-07-31 07:27:52,217 DEBG 'start-script' stdout output:
[info] Adding 37.235.1.174 to /etc/resolv.conf

2020-07-31 07:27:52,223 DEBG 'start-script' stdout output:
[info] Adding 1.1.1.1 to /etc/resolv.conf

2020-07-31 07:27:52,229 DEBG 'start-script' stdout output:
[info] Adding 209.222.18.218 to /etc/resolv.conf

2020-07-31 07:27:52,234 DEBG 'start-script' stdout output:
[info] Adding 37.235.1.177 to /etc/resolv.conf

2020-07-31 07:27:52,239 DEBG 'start-script' stdout output:
[info] Adding 84.200.70.40 to /etc/resolv.conf

2020-07-31 07:27:52,244 DEBG 'start-script' stdout output:
[info] Adding 1.0.0.1 to /etc/resolv.conf

2020-07-31 07:27:52,392 DEBG 'start-script' stdout output:
[info] Attempting to load iptable_mangle module...

2020-07-31 07:27:52,392 DEBG 'start-script' stderr output:
modprobe: FATAL: Module iptable_mangle not found in directory /lib/modules/4.19.107-Unraid

2020-07-31 07:27:52,393 DEBG 'start-script' stdout output:
[warn] Unable to load iptable_mangle module using modprobe, trying insmod...

2020-07-31 07:27:52,394 DEBG 'start-script' stderr output:
insmod: ERROR: could not load module /lib/modules/iptable_mangle.ko: No such file or directory


2020-07-31 07:27:52,394 DEBG 'start-script' stdout output:
[warn] Unable to load iptable_mangle module, you will not be able to connect to the applications Web UI or Privoxy outside of your LAN

2020-07-31 07:27:52,394 DEBG 'start-script' stdout output:
[info] unRAID/Ubuntu users: Please attempt to load the module by executing the following on your host: '/sbin/modprobe iptable_mangle'
[info] Synology users: Please attempt to load the module by executing the following on your host: 'insmod /lib/modules/iptable_mangle.ko'

2020-07-31 07:27:52,415 DEBG 'start-script' stdout output:
[info] Docker network defined as 172.17.0.0/16

2020-07-31 07:27:52,419 DEBG 'start-script' stdout output:
[info] Adding 192.168.0.0/24 as route via docker eth0

2020-07-31 07:27:52,420 DEBG 'start-script' stdout output:
[info] ip route defined as follows...

2020-07-31 07:27:52,420 DEBG 'start-script' stdout output:
--------------------

2020-07-31 07:27:52,422 DEBG 'start-script' stdout output:
default via 172.17.0.1 dev eth0

2020-07-31 07:27:52,422 DEBG 'start-script' stdout output:
172.17.0.0/16 dev eth0 proto kernel scope link src 172.17.0.11
192.168.0.0/24 via 172.17.0.1 dev eth0

2020-07-31 07:27:52,422 DEBG 'start-script' stdout output:
--------------------

2020-07-31 07:27:52,479 DEBG 'start-script' stdout output:
[info] iptables defined as follows...
--------------------

2020-07-31 07:27:52,480 DEBG 'start-script' stdout output:
-P INPUT DROP
-P FORWARD DROP
-P OUTPUT DROP
-A INPUT -s 172.17.0.0/16 -d 172.17.0.0/16 -j ACCEPT
-A INPUT -i eth0 -p udp -m udp --sport 1198 -j ACCEPT
-A INPUT -i eth0 -p tcp -m tcp --dport 8112 -j ACCEPT
-A INPUT -i eth0 -p tcp -m tcp --sport 8112 -j ACCEPT
-A INPUT -s 192.168.0.0/24 -i eth0 -p tcp -m tcp --dport 58846 -j ACCEPT
-A INPUT -s 192.168.0.0/24 -d 172.17.0.0/16 -i eth0 -p tcp -j ACCEPT
-A INPUT -p icmp -m icmp --icmp-type 0 -j ACCEPT
-A INPUT -i lo -j ACCEPT
-A INPUT -i tun0 -j ACCEPT
-A OUTPUT -s 172.17.0.0/16 -d 172.17.0.0/16 -j ACCEPT
-A OUTPUT -o eth0 -p udp -m udp --dport 1198 -j ACCEPT
-A OUTPUT -o eth0 -p tcp -m tcp --dport 8112 -j ACCEPT
-A OUTPUT -o eth0 -p tcp -m tcp --sport 8112 -j ACCEPT
-A OUTPUT -d 192.168.0.0/24 -o eth0 -p tcp -m tcp --sport 58846 -j ACCEPT
-A OUTPUT -s 172.17.0.0/16 -d 192.168.0.0/24 -o eth0 -p tcp -j ACCEPT
-A OUTPUT -p icmp -m icmp --icmp-type 8 -j ACCEPT
-A OUTPUT -o lo -j ACCEPT
-A OUTPUT -o tun0 -j ACCEPT

2020-07-31 07:27:52,482 DEBG 'start-script' stdout output:
--------------------

2020-07-31 07:27:52,483 DEBG 'start-script' stdout output:
[info] Starting OpenVPN...

2020-07-31 07:27:52,489 DEBG 'start-script' stdout output:
Fri Jul 31 07:27:52 2020 WARNING: file 'credentials.conf' is group or others accessible

Fri Jul 31 07:27:52 2020 OpenVPN 2.4.9 [git:makepkg/9b0dafca6c50b8bb+] x86_64-pc-linux-gnu [SSL (OpenSSL)] [LZO] [LZ4] [EPOLL] [PKCS11] [MH/PKTINFO] [AEAD] built on Apr 20 2020
Fri Jul 31 07:27:52 2020 library versions: OpenSSL 1.1.1g 21 Apr 2020, LZO 2.10

2020-07-31 07:27:52,489 DEBG 'start-script' stdout output:
[info] OpenVPN started

2020-07-31 07:27:52,490 DEBG 'start-script' stdout output:
Fri Jul 31 07:27:52 2020 NOTE: the current --script-security setting may allow this configuration to call user-defined scripts

2020-07-31 07:27:52,492 DEBG 'start-script' stdout output:
Fri Jul 31 07:27:52 2020 CRL: loaded 1 CRLs from file [[INLINE]]

2020-07-31 07:27:52,492 DEBG 'start-script' stdout output:
Fri Jul 31 07:27:52 2020 TCP/UDP: Preserving recently used remote address: [AF_INET]156.146.63.65:1198

2020-07-31 07:27:52,493 DEBG 'start-script' stdout output:
Fri Jul 31 07:27:52 2020 UDP link local: (not bound)
Fri Jul 31 07:27:52 2020 UDP link remote: [AF_INET]156.146.63.65:1198

2020-07-31 07:27:52,618 DEBG 'start-script' stdout output:
Fri Jul 31 07:27:52 2020 [81d6289914f7e72adfa1f9a1fe98bb97] Peer Connection Initiated with [AF_INET]156.146.63.65:1198

2020-07-31 07:27:59,014 DEBG 'start-script' stdout output:
Fri Jul 31 07:27:59 2020 TUN/TAP device tun0 opened
Fri Jul 31 07:27:59 2020 /usr/bin/ip link set dev tun0 up mtu 1500

2020-07-31 07:27:59,015 DEBG 'start-script' stdout output:
Fri Jul 31 07:27:59 2020 /usr/bin/ip addr add dev tun0 local 10.6.12.6 peer 10.6.12.5

2020-07-31 07:27:59,017 DEBG 'start-script' stdout output:
Fri Jul 31 07:27:59 2020 /root/openvpnup.sh tun0 1500 1558 10.6.12.6 10.6.12.5 init

2020-07-31 07:27:59,027 DEBG 'start-script' stdout output:
Fri Jul 31 07:27:59 2020 Initialization Sequence Completed

2020-07-31 07:27:59,144 DEBG 'start-script' stdout output:
[info] Port forwarding is enabled
[info] Checking endpoint 'france.privateinternetaccess.com' is port forward enabled...

2020-07-31 07:27:59,958 DEBG 'start-script' stdout output:
[info] PIA endpoint 'france.privateinternetaccess.com' is in the list of endpoints that support port forwarding

2020-07-31 07:27:59,958 DEBG 'start-script' stdout output:
[info] List of PIA endpoints that support port forwarding:-

2020-07-31 07:27:59,958 DEBG 'start-script' stdout output:
[info] ca-toronto.privateinternetaccess.com
[info] ca-montreal.privateinternetaccess.com
[info] ca-vancouver.privateinternetaccess.com
[info] de-berlin.privateinternetaccess.com
[info] de-frankfurt.privateinternetaccess.com
[info] sweden.privateinternetaccess.com
[info] swiss.privateinternetaccess.com
[info] france.privateinternetaccess.com
[info] czech.privateinternetaccess.com
[info] spain.privateinternetaccess.com
[info] ro.privateinternetaccess.com
[info] israel.privateinternetaccess.com

2020-07-31 07:27:59,959 DEBG 'start-script' stdout output:
[info] Attempting to get dynamically assigned port...

2020-07-31 07:28:00,101 DEBG 'start-script' stdout output:
[warn] Exit code '56' from curl != 0 or no response body received
[info] 12 retries left
[info] Retrying in 10 secs...

2020-07-31 07:28:10,159 DEBG 'start-script' stdout output:
[warn] Exit code '56' from curl != 0 or no response body received
[info] 11 retries left
[info] Retrying in 10 secs...

2020-07-31 07:28:20,219 DEBG 'start-script' stdout output:
[warn] Exit code '56' from curl != 0 or no response body received
[info] 10 retries left
[info] Retrying in 10 secs...

 

...and then it just repeats

 

2020-07-31 07:28:30,278 DEBG 'start-script' stdout output:
[warn] Exit code '56' from curl != 0 or no response body received
[info] 9 retries left
[info] Retrying in 10 secs...

 

Edited by chris_netsmart
Link to post

I'm also getting the "[warn] Exit code '56' from curl != 0 or no response body received" error.

 

Woke up this morning to some errors in Sonarr about indexers (i run Jackett through this container) & clients being unavailable due to failures. Been tearing my hair out as I can't figure it out, so in a sense I'm glad it's not just me 🤣

Link to post

I am getting the same curl error, Exit code 56 when using the Swiss server .ovpn file. When I tried with Sweden it worked though. Could you see if you maybe experience the same? I think it might be a PIA issue tbh.

Link to post
I'm also getting the "[warn] Exit code '56' from curl != 0 or no response body received" error.
 
Woke up this morning to some errors in Sonarr about indexers (i run Jackett through this container) & clients being unavailable due to failures. Been tearing my hair out as I can't figure it out, so in a sense I'm glad it's not just me 
It's a pia issue, I had swiss endpoint stop working last night, switch endpoint, I'm now on CA montreal

Sent from my CLT-L09 using Tapatalk

Link to post
1 hour ago, binhex said:

It's a pia issue, I had swiss endpoint stop working last night, switch endpoint, I'm now on CA montreal

Any chance this will motivate you to provide automatic endpoint failover / rotation in some form? Not a formal request, just wondering.

 

I can envision a rather complex routine involving multiple ovpn, periodic rate testing of each, and connection to the best one.

Link to post

I just got reply from customer service at PIA, and thought their answer might be of interest to you @binhex 
 

Quote

 

Hello Mads,
Thank you for contacting us here at Private Internet Access. 

I am sorry you are experiencing issues with port forwarding. This may be in part because of our ongoing server migration. Please try changing to our Next Generation network in application settings under the Help tab on desktop and at the bottom of the settings page on mobile. 
 

We are currently in the process of migrating our servers over to our Next Generation network which will provide improved speed an connectivity for users worldwide. Some of these changes and improvements involve migrations and configurations changes on specific servers. We will make every effort to provide information on outages or other issues that may arise and at the moment, you can find any and all current information regarding outages or issues in our support portal, here:


https://www.privateinternetaccess.com/helpdesk/news/posts/july-15-2020-important-server-changes-and-related-issues

The process of improving our overall network will be completed in waves and could affect different groups of servers at different times.  In the meantime, if a connection error occurs, please connect to a different location and try the desired server at a later time, you may additional wish to move over to the next generation network which is available through the setting of all versions of our application to see if it resolves the issue you are experiencing.
 

Please let us know if these troubleshooting steps have been helpful or if we need to continue our efforts.

 

Regards

Travis
Customer Support Agent

A+

 

 

I dont know what the "Next Generation network" does in the desktop app, but it might involve some changes to delugevpn in some way? I dunno, here you have it atleast :)

Link to post

My issue is the same as PyroKid99 on p229 of this thread

 

I'm having trouble connecting this delugeVPN docker image to couchpotato and/or radarr


I am using a synology nas and privateinternetaccess vpn.

Delugevpn works fine. LAN_NETWORK is set appropriately (192.168.1.0/24).
auth file was modified by me to only contain: admin:deluge:10

connection manager in deluge shows one account saying connected admin@127.0.0.1:58846
allow remote connections and daemon port is set in deluge settings

ports are properly mapped in docker config

I have shut down and re-started all docker images and the nas multiple times.

 

I am able to connect to delugevpn with sickgear and lidarr. Torrents are transferred over and download without any issue. The connection always fails for couchpotato and radarr. I have tried both docker images and a local installation.

I have read the FAQ for "connect couchpotato to delugevpn" a dozen times and I am positive I followed the steps correctly.

After reading through this thread, it looks like couchpotato does not work with the latest deluge. That Is fine, I can live with radarr.
I can't get radarr working with delugevpn though. Keep getting connect failed after timeout.

has anyone gotten delugevpn working with radarr?
 

Edited by starfox5194
Link to post
On 7/20/2020 at 12:07 PM, MrDimsum99 said:

As fellow ProtonVPN user, thank you for these instructions. It put me in the right direction to get it working.

 

However, I found out that I could simply use the config file generated from my ProtonVPN account. After I downloaded the config, I simply renamed it to "openvpn.ovpn", then placed this file in the "./appdata/binhex-delugevpn/openvpn" folder. Then started the container with the right credentials and left most of my parameters default.

It works!

As another ProtonVPN user I was excited to find this! I followed your quoted version of @shaunsund post and integrated it with Spaceinvader One's video instructions, but I cannot get to the GUI.

 

After typing up a long description of what I'd been through trying to get this to work, I decided to try one more thing. Just for the heck of it, I edited the docker settings to disable the VPN. I started the docker and was able to get to the GUI. I closed the tab, edited the docker settings to enable VPN and restarted the docker. Lo and behold, I can now get to the Deluge GUI!

 

I have no idea why or how that worked.

 

I will leave two little nuggets, though, for fellow ProtonVPN users:

 

1) Don't forget to grab your OpenVPN / IKEv2 username/pwd from your Proton account and set them up in the config. You cannot use your ProtonVPN/ProtonMail userID/pwd to access the VPN via 3rd party apps!

2) Make sure you download a specific country/server ovpn file, or you may not get connected to a server that supports P2P.

 

Edited by FreeMan
Link to post
@binhex
Would it cause any issues if I stored the openvpn.zip file that I downloaded from PIA in the openvpn folder in appdata? Just looking for someplace to store all the ovpn files where I can find them easily when I need to switch end points.
Nope that's fine.

Sent from my CLT-L09 using Tapatalk

Link to post

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.