Steviewunda Posted April 11, 2023 Share Posted April 11, 2023 13 minutes ago, Steviewunda said: I'm getting this warning even after making the recommended change in Docker Settings Sorry - just did a reboot and no longer getting this warning Quote Link to comment
nraygun Posted April 20, 2023 Share Posted April 20, 2023 (edited) I got this macvlan error too and not sure if it's a simple matter of changing that option in the Docker settings area. Did you have to recreate the vlan after making this setting change so it uses ipvlan instead of macvlan? Edited April 20, 2023 by nraygun Quote Link to comment
nraygun Posted April 21, 2023 Share Posted April 21, 2023 (edited) I tried changing to ipvlan and it broke DuckDNS. Putting it back restored operation. Not sure why. It's not on a custom network, just Host. Guess I'll leave it alone unless someone else has some guidance. Seems that the plugin should flag macvlan as a warning versus an error. Edited April 21, 2023 by nraygun Quote Link to comment
rkotara Posted April 21, 2023 Share Posted April 21, 2023 (edited) Anyone else getting "not available" for this plugin when looking at update status on the plugin page? Edited April 21, 2023 by rkotara Quote Link to comment
Govnah Posted April 21, 2023 Share Posted April 21, 2023 27 minutes ago, rkotara said: Anyone else getting "not available" for this plugin when looking at update status on the plugin page? +1 Quote Link to comment
Squid Posted April 21, 2023 Author Share Posted April 21, 2023 Yeah. inadvertent change to the .plg that messed it up. If it was summer and I had a pool, you have permission to beat me with a wet noodle 1 1 Quote Link to comment
Wintersdark Posted May 5, 2023 Share Posted May 5, 2023 Is there a way to disable checking for new docker versions? My dockers all auto-update on a set schedule, but this means I'll often have 20+ notifications (for docker updates) all of which have already automatically been updated since. It's not useful and spams the notification list badly. Quote Link to comment
trurl Posted May 6, 2023 Share Posted May 6, 2023 13 hours ago, Wintersdark said: Is there a way to disable checking for new docker versions? My dockers all auto-update on a set schedule, but this means I'll often have 20+ notifications (for docker updates) all of which have already automatically been updated since. It's not useful and spams the notification list badly. Me too. Wasn't happening until recently. Not sure where those emails are coming from but FCP seems the only logical source. Quote Link to comment
MAM59 Posted May 14, 2023 Share Posted May 14, 2023 Yeah I know, this here is mentioned very often already but still unresolved and nagging: May 14 04:40:02 F root: Fix Common Problems Version 2023.04.26 May 14 04:40:04 F root: Fix Common Problems: Warning: unRaids built in FTP server is currently disabled, but users are defined ** Ignored The message is simply wrong, There are no ftp users in unraid, there is a docker with crushftp installed (and with its own database for users). Also, nobody knows how to "resolve" this common problem. Yeah, you can ignore it, but the message should never pop up. This is not "Fix Common Problems" this is more "Create Common Problems". Quote Link to comment
Rick Pawlowski Posted May 16, 2023 Share Posted May 16, 2023 My file log is filling up to 110%. I have added my diagnostic file for review. syslog.1.txt Quote Link to comment
MAM59 Posted May 16, 2023 Share Posted May 16, 2023 4 minutes ago, Rick Pawlowski said: My file log is filling up to 110%. I have added my diagnostic file for review. Tame your client 192.168.88.110. He is banging something on your server many thousands of times per seconds. The log does not say which program is been banged, but I would look for something that offers net services like nextcloud or so. There is something running wild on that client. Quote Link to comment
ljm42 Posted May 16, 2023 Share Posted May 16, 2023 On 5/13/2023 at 10:55 PM, MAM59 said: Yeah I know, this here is mentioned very often already but still unresolved and nagging: May 14 04:40:02 F root: Fix Common Problems Version 2023.04.26 May 14 04:40:04 F root: Fix Common Problems: Warning: unRaids built in FTP server is currently disabled, but users are defined ** Ignored The message is simply wrong, There are no ftp users in unraid, there is a docker with crushftp installed (and with its own database for users). Also, nobody knows how to "resolve" this common problem. Yeah, you can ignore it, but the message should never pop up. You can see the FCP code here: https://github.com/Squidly271/fix.common.problems/blob/ce84e87f79caaf750bc84a16f7ecdb93561f4cec/source/fix.common.problems/usr/local/emhttp/plugins/fix.common.problems/include/tests.php#L714 If this file exists on your flash drive it will trigger that message: /boot/config/vsftpd.user_list It looks like when you go to Settings -> FTP Server and remove the users, it empties the file but does not delete it. The FCP test could be updated to ignore a file with no data. In the meantime you can get rid of the message by deleting the empty config/vsftpd.user_list file from your flash drive. Quote Link to comment
MAM59 Posted May 17, 2023 Share Posted May 17, 2023 7 hours ago, ljm42 said: The FCP test could be updated to ignore a file with no data. In the meantime you can get rid of the message by deleting the empty config/vsftpd.user_list file from your flash drive. tnx! this worked. Maybe you should add this explanation/solution to the warning message? So affected people instantly would know why it happens and how to fix it? I never had any vsftp users, as far as I can remember, but in the beginnings I have turned on the builtin ftp just to see that it does not fulfill my needs. So I guess, the file was autocreated, but how could I know? Quote Link to comment
RMichaelRae Posted May 30, 2023 Share Posted May 30, 2023 My /var/log is getting full. It is not egregious, but the constant notifications are getting old. I am unable to figure out what is causing this. Any help is appreciated.cassandra-diagnostics-20230530-1001cassandra-diagnostics-20230530-1001cassandra-diagnostics-20230530-1001cassandra-diagnostics-20230530-1001 cassandra-diagnostics-20230530-1001.zip Quote Link to comment
trurl Posted May 31, 2023 Share Posted May 31, 2023 20 hours ago, RMichaelRae said: /var/log is getting full Doesn't seem to be a problem with FCP plugin On 5/8/2016 at 4:01 PM, Squid said: Any support for problems this plugin finds, should be posted in the General v6 section of these forums Quote Link to comment
mattw Posted June 6, 2023 Share Posted June 6, 2023 I am having a problem with FCP hanging on scanning. I initially was running this because a script that I back of PFSense with is not assigning permissions they way it should, not sure what to do about that. But, FPC should not hang. tower-diagnostics-20230606-1052.zip Quote Link to comment
Squid Posted June 6, 2023 Author Share Posted June 6, 2023 When running a manual scan, the popup shows the progress (the current scan). What does it say? Quote Link to comment
mattw Posted June 6, 2023 Share Posted June 6, 2023 This is all I get... would a manual scan be something different than clicking rescan in the GUI? Quote Link to comment
jginzkey Posted June 10, 2023 Share Posted June 10, 2023 (edited) On 3/4/2023 at 8:11 AM, Squid said: "addons" issue fixed on today's release I had a feeling an update was just needed to correct the error. But I am still receiving the error. Can you or someone else help me ID the folder the errant folder. root@******:~# ls -l /mnt/ total 32 drwxrwxrwt 2 nobody users 40 May 25 23:21 addons/ drwxr-xr-x 3 root root 60 May 25 23:21 cache/ drwxrwxrwx 1 nobody users 28 Jun 10 04:40 cache_downloads/ drwxrwxrwx 1 nobody users 48 Jun 10 04:40 cache_main/ drwxrwxrwx 7 nobody users 101 Jun 10 04:40 disk1/ drwxrwxrwx 5 nobody users 66 Jun 10 04:40 disk10/ drwxrwxrwx 4 nobody users 48 Jun 10 04:40 disk11/ drwxrwxrwx 5 nobody users 66 Jun 10 04:40 disk12/ drwxrwxrwx 5 nobody users 66 Jun 10 04:40 disk13/ drwxrwxrwx 5 nobody users 66 Jun 10 04:40 disk14/ drwxrwxrwx 5 nobody users 50 Jun 10 04:40 disk15/ drwxrwxrwx 5 nobody users 66 Jun 10 04:40 disk16/ drwxrwxrwx 5 nobody users 66 Jun 10 04:40 disk17/ drwxrwxrwx 5 nobody users 66 Jun 10 04:40 disk18/ drwxrwxrwx 5 nobody users 66 Jun 10 04:40 disk19/ drwxrwxrwx 6 nobody users 85 Jun 10 04:40 disk2/ drwxrwxrwx 6 nobody users 84 Jun 10 04:40 disk20/ drwxrwxrwx 6 nobody users 87 Jun 10 04:40 disk21/ drwxrwxrwx 5 nobody users 66 Jun 10 04:40 disk22/ drwxrwxrwx 4 nobody users 48 Jun 10 04:40 disk23/ drwxrwxrwx 5 nobody users 69 Jun 10 04:40 disk24/ drwxrwxrwx 7 nobody users 101 Jun 10 04:40 disk3/ drwxrwxrwx 6 nobody users 85 Jun 10 04:40 disk4/ drwxrwxrwx 6 nobody users 82 Jun 10 04:40 disk5/ drwxrwxrwx 5 nobody users 66 Jun 10 04:40 disk6/ drwxrwxrwx 5 nobody users 66 Jun 10 04:40 disk7/ drwxrwxrwx 5 nobody users 66 Jun 10 04:40 disk8/ drwxrwxrwx 6 nobody users 87 Jun 10 04:40 disk9/ drwxrwxrwt 2 nobody users 40 May 25 23:21 disks/ drwxrwxrwt 2 nobody users 40 May 25 23:21 remotes/ drwxrwxrwt 2 nobody users 40 May 25 23:21 rootshare/ drwxrwxrwx 1 nobody users 101 Jun 10 04:40 user/ drwxrwxrwx 1 nobody users 101 Jun 10 04:40 user0/ Edited June 10, 2023 by jginzkey Quote Link to comment
Grimbone Posted June 14, 2023 Share Posted June 14, 2023 (edited) On 6/6/2023 at 4:09 PM, mattw said: This is all I get... would a manual scan be something different than clicking rescan in the GUI? In Settings > NetworkSettings change IPv4 DNS server assignment from Automatic to Static Set IPv4 DNS server to 8.8.8.8 and 8.8.4.4 Now try and see if it works. *EDIT* You will have to disable Docker and VM's in the settings before you can make these adjustments. Edited June 14, 2023 by Grimbone Clarity Quote Link to comment
Hexenhammer Posted June 14, 2023 Share Posted June 14, 2023 Hi, every day i get this "root: Fix Common Problems: Warning: Write Cache is disabled on disk8" Disk8 is actual disk 8 in the array? I tested every disk with that command that the plugin links to, and it says that cache is ON. But every day im getting a report that cache is off Quote Link to comment
KHP_BOH Posted June 16, 2023 Share Posted June 16, 2023 (edited) Hi, since some month I got the warning: I've ignored this because everything works fine, but before updating to 6.12 I would like to solve this issue... All shares works like a charm, the system is running smoothly without any other problems. But I can not find any problem in my shares configuration. It would be great if someone has an idea! nasgw-diagnostics-20230616-0726.zip Edited June 16, 2023 by KHP_BOH Quote Link to comment
itimpi Posted June 16, 2023 Share Posted June 16, 2023 2 hours ago, KHP_BOH said: I've ignored this because everything works fine, but before updating to 6.12 I would like to solve this issue... All shares works like a charm, the system is running smoothly without any other problems. But I can not find any problem in my shares configuration. Have you checked that you do not have a top level folder called 'disks' on either a cache pool or on any array drive? The FCP messages imply it might be on the cache. Quote Link to comment
KHP_BOH Posted June 16, 2023 Share Posted June 16, 2023 Great, thanks a lot for this! Some time ago I've made a copy of the USB-Disk to the cache... Deleted -> Error has gone. Quote Link to comment
CkChong Posted June 18, 2023 Share Posted June 18, 2023 Current version not compatible with Unraid latest version 6.12.0? When click on it just hanging on scanning screen without moving. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.