SpaceInvaderOne Posted January 16, 2018 Share Posted January 16, 2018 2 hours ago, ThePhotraveller said: I tried multiple times followed every second of spaceinvader video. I still can't figure out why my connection is not going through. Make sure your duck DNS is resolving your public ip address. So to check ping diliremo.duckdns.org (if that is still what you are using-- but I would change that as you have posted it publicly here) Quote Link to comment
ThePhotraveller Posted January 20, 2018 Share Posted January 20, 2018 On 1/16/2018 at 2:59 PM, gridrunner said: Make sure your duck DNS is resolving your public ip address. So to check ping diliremo.duckdns.org (if that is still what you are using-- but I would change that as you have posted it publicly here) I checked it buddy. Its pointing to the ip only. And i have changed it now. But the issue remains Quote Link to comment
PaDadof2 Posted January 20, 2018 Share Posted January 20, 2018 I have this docker up and running, works great to access my ip address on the tower, but I'm not able to access any of my user shares in windows explorer. Is there something I can look for to get those to work too? Thanks in advance. Quote Link to comment
JonathanM Posted January 20, 2018 Share Posted January 20, 2018 1 hour ago, PaDadof2 said: I have this docker up and running, works great to access my ip address on the tower, but I'm not able to access any of my user shares in windows explorer. Is there something I can look for to get those to work too? Thanks in advance. Are you using \\ipaddress\share in windows explorer? Quote Link to comment
PaDadof2 Posted January 20, 2018 Share Posted January 20, 2018 (edited) 32 minutes ago, jonathanm said: Are you using \\ipaddress\share in windows explorer? I was not. I just opened up explorer and clicked on 'tower' I'll try to use ipaddress and see if that works. thank you for the reply EDIT: That works, thank you! Edited January 20, 2018 by PaDadof2 it worked! Quote Link to comment
JonathanM Posted January 20, 2018 Share Posted January 20, 2018 1 hour ago, PaDadof2 said: I was not. I just opened up explorer and clicked on 'tower' I'll try to use ipaddress and see if that works. thank you for the reply EDIT: That works, thank you! If you really want to keep using tower, then you will need to tell windows what IP it is. A few ways to do that, easiest is to add an entry in the hosts file. Quote Link to comment
Micaiah12 Posted January 22, 2018 Share Posted January 22, 2018 Hey guys how do I make it so when I update this docker that my credentials and settings aren't lost? I am having multiple issues and that is one of the main ones. Thanks Quote Link to comment
wgstarks Posted January 22, 2018 Share Posted January 22, 2018 3 minutes ago, Micaiah12 said: Hey guys how do I make it so when I update this docker that my credentials and settings aren't lost? I am having multiple issues and that is one of the main ones. Thanks It’s all outlined in the github and docker hub links in the OP. Scroll down to the setup section. Quote Link to comment
Nem Posted January 23, 2018 Share Posted January 23, 2018 any chance of adding letsencrypt to this for the webgui? Quote Link to comment
aptalca Posted January 24, 2018 Share Posted January 24, 2018 19 hours ago, Nem said: any chance of adding letsencrypt to this for the webgui? Read my reply in the letsencrypt thread. I strongly recommend against making this webgui accessible over wan Quote Link to comment
thisaone Posted January 26, 2018 Share Posted January 26, 2018 Hello , I have gotten this container set up a couple of times. Once it was with host networking. When I did that I could only access the Unraid GUI. I have now changed networking to its own IP. Now I can access every other computer and docker containers with their own IP, but not the Unraid IP, GUI or otherwise. Any ideas on what I should be looking at? Thanks. Quote Link to comment
Hoopster Posted January 26, 2018 Share Posted January 26, 2018 1 hour ago, thisaone said: Hello , I have gotten this container set up a couple of times. Once it was with host networking. When I did that I could only access the Unraid GUI. I have now changed networking to its own IP. Now I can access every other computer and docker containers with their own IP, but not the Unraid IP, GUI or otherwise. Any ideas on what I should be looking at? Thanks. That's as designed. Dockers assigned their own IP address on macvlan are isolated from the host. There are several posts in the forums from bonienl and others about this. There is a way around that, but, by default, there is no communication with the host once dockers have their own IPs on macvlan. Quote Link to comment
thisaone Posted January 26, 2018 Share Posted January 26, 2018 Okay, my apologies. I did do some reading, and think I read the posts you are talking about. I guess I didn't think they were the same since my dockers have an IP address on the same network as my real computers. I am learning and know just enough to get myself into trouble. Thank you for the prompt reply. Quote Link to comment
Hoopster Posted January 26, 2018 Share Posted January 26, 2018 22 minutes ago, thisaone said: Okay, my apologies. I did do some reading, and think I read the posts you are talking about. I guess I didn't think they were the same since my dockers have an IP address on the same network as my real computers. I am learning and know just enough to get myself into trouble. Thank you for the prompt reply. No need to apologize, we all learn by doing. I learned this the first time I assigned an IP address to a docker and had to do some searching to find out why I could not ping or ssh to the host. FYI, in case you want to isolate your dockers on their own network and have communication between dockers (but not with the unRAID host), here is a good guide for how to do it: Quote Link to comment
ThePhotraveller Posted January 30, 2018 Share Posted January 30, 2018 On 21/01/2018 at 2:21 AM, jonathanm said: If you really want to keep using tower, then you will need to tell windows what IP it is. A few ways to do that, easiest is to add an entry in the hosts file. Still my issue hasn't been solved bro Been banging my head for the past 2 months Quote Link to comment
JonathanM Posted January 30, 2018 Share Posted January 30, 2018 55 minutes ago, ThePhotraveller said: Still my issue hasn't been solved bro Been banging my head for the past 2 months Why did you quote my reply to a totally unrelated issue? Quote Link to comment
wayller Posted February 6, 2018 Share Posted February 6, 2018 I'm trying to get this to work. When I use br0I can access the OpenVPN web ui, but when I change it back to host, I can't access it. When I'm using br0, I can't access local IP's or anything else external. When I try using bond0 as interface, I can't access my Unraid GUI. What am I doing wrong? Quote Link to comment
wgstarks Posted February 6, 2018 Share Posted February 6, 2018 9 minutes ago, wayller said: I'm trying to get this to work. When I use br0I can access the OpenVPN web ui, but when I change it back to host, I can't access it. When I'm using br0, I can't access local IP's or anything else external. When I try using bond0 as interface, I can't access my Unraid GUI. What am I doing wrong? Are you setting the interface variable in your docker configuration? IIRC it defaults to eth0. If you’re using anything else you need to set it. Quote Link to comment
wayller Posted February 6, 2018 Share Posted February 6, 2018 9 minutes ago, wgstarks said: Are you setting the interface variable in your docker configuration? IIRC it defaults to eth0. If you’re using anything else you need to set it. I fixed it now. Set the port to 945 in the web ui and in the docker, changed it to bridge, and allowed my user access to the unRAID server subnet Quote Link to comment
hkyCoach Posted February 17, 2018 Share Posted February 17, 2018 I've got LetEncrypt running, with OpenVPN, and DDClient. The VPN works - but only intermittently. The most common issue is a timeout. However, other service running on my box (e.g., Plex) work just fine. Am I possibly missing a setting? Quote Link to comment
Nem Posted February 20, 2018 Share Posted February 20, 2018 the docker instructions says to remove the default admin account and assign admin privs to another user im wondering what a typical user setup should be: 1) 1 admin level user with a strong password and 1 regular user. both accounts used for daily vpn logins or 2) 1 new local admin account, and 2 regular user accounts. only the regular priv accounts are used for vpn connections is it normal to recreate an admin account after removing the default one, and use only that for setup and admin duties? Im trying to understand what the security reasons are for removing the default admin account, and whether creating another local admin account defeats that purpose Quote Link to comment
wgstarks Posted February 20, 2018 Share Posted February 20, 2018 (edited) 6 hours ago, Nem said: the docker instructions says to remove the default admin account and assign admin privs to another user im wondering what a typical user setup should be: 1) 1 admin level user with a strong password and 1 regular user. both accounts used for daily vpn logins or 2) 1 new local admin account, and 2 regular user accounts. only the regular priv accounts are used for vpn connections is it normal to recreate an admin account after removing the default one, and use only that for setup and admin duties? Im trying to understand what the security reasons are for removing the default admin account, and whether creating another local admin account defeats that purpose All accounts will need to be local. The reason the default admin account is removed is that the default user/password was recreated every time the docker was updated. This would allow anyone to have admin privileges on your docker. Edited February 20, 2018 by wgstarks Quote Link to comment
aptalca Posted February 20, 2018 Share Posted February 20, 2018 7 hours ago, Nem said: the docker instructions says to remove the default admin account and assign admin privs to another user im wondering what a typical user setup should be: 1) 1 admin level user with a strong password and 1 regular user. both accounts used for daily vpn logins or 2) 1 new local admin account, and 2 regular user accounts. only the regular priv accounts are used for vpn connections is it normal to recreate an admin account after removing the default one, and use only that for setup and admin duties? Im trying to understand what the security reasons are for removing the default admin account, and whether creating another local admin account defeats that purpose The second option. Also keep in mind that one user account can be used simultaneously by multiple clients if you allow that in the settings. My phone, tablet and laptop all use the same user account Quote Link to comment
kcgodwins Posted February 20, 2018 Share Posted February 20, 2018 On 1/13/2018 at 7:09 PM, Everend said: No, I don't think so. Here's what I did so far with this docker... 1. from the Apps tab, search for openvpn. 2. Locate and click on the install icon for the Linuxserver.io version. 3. per the spaceinvader's video I was following, verified the default settings were Host and Privileged: = on 4. After the successful install message, click on the Docker tab. See the openvpn docker is running, then click on the WebUI 5. Received the ERR_CONNECTION_REFUSED message. 6. Back on the docker tab, EDIT the docker, change the Network Type: to Bridge (from Host). 7. Refresh the chrome tab https://192.168.0.107:943 8. At this point the unsecure message spaceinvader's video said would come up. Note: This is the first docker installed on this new unraid install. Q: Can I continue to run openvpn on the Bridge network type? Are there any considerations/issues for doing this? Q: Separate symptom which I expect is related.. I am still unable to use the Unassigned Devices plugin feature to "Add Remote SMB Share" found on the unRaid GUI "Main" tab. I'm having this exact issue; I didn't try bridge mode because everything I have read said it has to be host, so I don't know if changing it would have fixed it for me and I'm not near the machine to try it now. This is a brand new UnRaid setup and, if I remember correctly, bonding was on by default. However, I have only one NIC so I disabled bonding, and it shows as disabled in the setup. Not sure if it needs a reboot but maybe I'll try that as well. I will be watching this thread for any further info. 1 Quote Link to comment
ChappyEight Posted March 8, 2018 Share Posted March 8, 2018 I've got the same issue as Everend and kcgodwins. Curious to hear if it's okay to keep running on the Bridge network type. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.