lixe Posted March 27, 2019 Share Posted March 27, 2019 (edited) Was someone able to install the latest version of clover (4895)? I'm using 4674 right now an it works absolutely fine. If I update to 4895 or 4901 (which was released nearly an hour ago), I can't boot anymore. I get stuck at the TianoCore logo. I've discovered a new driver AudioDxe-64.efi, which I guessed I won't need anyway and sounds like it could cause problems. After deleting it it shows "clover 4895, scan entries". But nothing more happens. Tried it with HFSPlus.efi and VBoxhfs.efi, neither worked and also not both at the same time... Beside that, I don't use any unusual drivers. Also tried replacing the new drivers64UEFI folder with my backed up one, but won't boot either. The image attached shows all the driver I'm currently using with clover 4674. EDIT: I've also tried removing my old drivers64UEFI folder before the installation, so all drivers will get installed. After that I've copied the Apple* ones over, but also doesn't work. EDIT2: So I found a version which could maybe work (4862 from tonymacx86). My external USB backup drive (HFS+) is recognized. But usually I'm using an NVMe drive with APFS. I'm pretty sure the APFS filesystem isn't working properly... and I've already tried different drivers. EDIT3: Finally got it working (at least 4862 from tonymacx86). The problem was ApfsDriverLoader-64.efi. Had to delete it completely and instead use only apfs-patched.efi. Now its working so far Edited March 28, 2019 by lixe 3 Quote Link to comment
brinx Posted March 29, 2019 Share Posted March 29, 2019 Hi, i tried to install High Sierra VM. I've created bootable disk on a mac. I added 3 vdisks. Added config for Hig Sierra. When I boot VNC it bootloops. It shows Clover than apple logo and restarts. I'm on Ryzen 5 - 1500X - x370 Asrock Taichi with latest Bios and Unraid 6.7.0-rc6 any suggestions? <?xml version='1.0' encoding='UTF-8'?> <domain type='kvm' id='17' xmlns:qemu='http://libvirt.org/schemas/domain/qemu/1.0'> <name>OSX HIGH SIERRA</name> <uuid>26a91b1f-6020-f109-eb17-a2c22c49b36d</uuid> <metadata> <vmtemplate xmlns="unraid" name="Linux" icon="OSX_10.12.png" os="linux"/> </metadata> <memory unit='KiB'>8388608</memory> <currentMemory unit='KiB'>8388608</currentMemory> <memoryBacking> <nosharepages/> </memoryBacking> <vcpu placement='static'>6</vcpu> <cputune> <vcpupin vcpu='0' cpuset='2'/> <vcpupin vcpu='1' cpuset='3'/> <vcpupin vcpu='2' cpuset='4'/> <vcpupin vcpu='3' cpuset='5'/> <vcpupin vcpu='4' cpuset='6'/> <vcpupin vcpu='5' cpuset='7'/> </cputune> <resource> <partition>/machine</partition> </resource> <os> <type arch='x86_64' machine='pc-q35-3.0'>hvm</type> <loader readonly='yes' type='pflash'>/usr/share/qemu/ovmf-x64/OVMF_CODE-pure-efi.fd</loader> <nvram>/etc/libvirt/qemu/nvram/26a91b1f-6020-f109-eb17-a2c22c49b36d_VARS-pure-efi.fd</nvram> </os> <features> <acpi/> <apic/> </features> <cpu mode='host-passthrough' check='none'> <topology sockets='1' cores='6' threads='1'/> </cpu> <clock offset='utc'> <timer name='rtc' tickpolicy='catchup'/> <timer name='pit' tickpolicy='delay'/> <timer name='hpet' present='no'/> </clock> <on_poweroff>destroy</on_poweroff> <on_reboot>restart</on_reboot> <on_crash>restart</on_crash> <devices> <emulator>/usr/local/sbin/qemu</emulator> <disk type='file' device='disk'> <driver name='qemu' type='qcow2' cache='writeback'/> <source file='/mnt/user/domains/OSX HIGH SIERRA/clover.qcow2'/> <backingStore/> <target dev='hdc' bus='sata'/> <boot order='1'/> <alias name='sata0-0-2'/> <address type='drive' controller='0' bus='0' target='0' unit='2'/> </disk> <disk type='file' device='disk'> <driver name='qemu' type='raw' cache='writeback'/> <source file='/mnt/user/domains/OSX HIGH SIERRA/highsierra.img'/> <backingStore/> <target dev='hdd' bus='sata'/> <alias name='sata0-0-3'/> <address type='drive' controller='0' bus='0' target='0' unit='3'/> </disk> <disk type='file' device='disk'> <driver name='qemu' type='raw' cache='writeback'/> <source file='/mnt/user/domains/OSX HIGH SIERRA/vdisk3.img'/> <backingStore/> <target dev='hde' bus='sata'/> <alias name='sata0-0-4'/> <address type='drive' controller='0' bus='0' target='0' unit='4'/> </disk> <controller type='sata' index='0'> <alias name='ide'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x1f' function='0x2'/> </controller> <controller type='pci' index='0' model='pcie-root'> <alias name='pcie.0'/> </controller> <controller type='pci' index='1' model='pcie-root-port'> <model name='pcie-root-port'/> <target chassis='1' port='0x10'/> <alias name='pci.1'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x0' multifunction='on'/> </controller> <controller type='pci' index='2' model='pcie-root-port'> <model name='pcie-root-port'/> <target chassis='2' port='0x11'/> <alias name='pci.2'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x1'/> </controller> <controller type='pci' index='3' model='pcie-root-port'> <model name='pcie-root-port'/> <target chassis='3' port='0x12'/> <alias name='pci.3'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x2'/> </controller> <controller type='pci' index='4' model='pcie-root-port'> <model name='pcie-root-port'/> <target chassis='4' port='0x13'/> <alias name='pci.4'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x3'/> </controller> <controller type='virtio-serial' index='0'> <alias name='virtio-serial0'/> <address type='pci' domain='0x0000' bus='0x02' slot='0x00' function='0x0'/> </controller> <controller type='usb' index='0' model='ich9-ehci1'> <alias name='usb'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x7'/> </controller> <controller type='usb' index='0' model='ich9-uhci1'> <alias name='usb'/> <master startport='0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x0' multifunction='on'/> </controller> <controller type='usb' index='0' model='ich9-uhci2'> <alias name='usb'/> <master startport='2'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x1'/> </controller> <controller type='usb' index='0' model='ich9-uhci3'> <alias name='usb'/> <master startport='4'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x2'/> </controller> <interface type='bridge'> <mac address='52:54:00:58:d3:51'/> <source bridge='br0'/> <target dev='vnet1'/> <model type='vmxnet3'/> <alias name='net0'/> <address type='pci' domain='0x0000' bus='0x01' slot='0x00' function='0x0'/> </interface> <serial type='pty'> <source path='/dev/pts/2'/> <target type='isa-serial' port='0'> <model name='isa-serial'/> </target> <alias name='serial0'/> </serial> <console type='pty' tty='/dev/pts/2'> <source path='/dev/pts/2'/> <target type='serial' port='0'/> <alias name='serial0'/> </console> <channel type='unix'> <source mode='bind' path='/var/lib/libvirt/qemu/channel/target/domain-17-OSX HIGH SIERRA/org.qemu.guest_agent.0'/> <target type='virtio' name='org.qemu.guest_agent.0' state='disconnected'/> <alias name='channel0'/> <address type='virtio-serial' controller='0' bus='0' port='1'/> </channel> <input type='tablet' bus='usb'> <alias name='input0'/> <address type='usb' bus='0' port='1'/> </input> <input type='mouse' bus='ps2'> <alias name='input1'/> </input> <input type='keyboard' bus='ps2'> <alias name='input2'/> </input> <graphics type='vnc' port='5902' autoport='yes' websocket='5700' listen='0.0.0.0' keymap='en-us'> <listen type='address' address='0.0.0.0'/> </graphics> <video> <model type='qxl' ram='65536' vram='65536' vgamem='16384' heads='1' primary='yes'/> <alias name='video0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x0'/> </video> <memballoon model='virtio'> <alias name='balloon0'/> <address type='pci' domain='0x0000' bus='0x03' slot='0x00' function='0x0'/> </memballoon> </devices> <seclabel type='dynamic' model='dac' relabel='yes'> <label>+0:+100</label> <imagelabel>+0:+100</imagelabel> </seclabel> <qemu:commandline> <qemu:arg value='-usb'/> <qemu:arg value='-device'/> <qemu:arg value='usb-mouse,bus=usb-bus.0'/> <qemu:arg value='-device'/> <qemu:arg value='usb-kbd,bus=usb-bus.0'/> <qemu:arg value='-device'/> <qemu:arg value='isa-applesmc,osk=deleted'/> <qemu:arg value='-smbios'/> <qemu:arg value='type=2'/> <qemu:arg value='-cpu'/> <qemu:arg value='Penryn,vendor=GenuineIntel,kvm=on,+invtsc,+avx,+avx2,+aes,+xsave,+xsaveopt,vmware-cpuid-freq=on,'/> </qemu:commandline> </domain> Quote Link to comment
david279 Posted March 29, 2019 Share Posted March 29, 2019 Hey remove this line and try again <topology sockets='1' cores='6' threads='1'/> Quote Link to comment
SnakeDrak Posted April 9, 2019 Share Posted April 9, 2019 Has somebody connected successfully an iPhone to OSX? It is in a loop connecting and disconnecting every time and I cannot see the device inside the MacOS. According to some external forums, it is easy to solve in VMWare with a configuration option in the VMX file: Quote usb.quirks.device0 = "0x05ac:0x12a8 skip-reset, skip-refresh, skip-setconfig" I don't know how to make it with unRaid More info: https://stackoverflow.com/questions/52988664/connecting-an-iphone-to-a-libvirt-virtual-machine-running-osx Quote Link to comment
alpaca_sandhog Posted April 20, 2019 Share Posted April 20, 2019 (edited) Hi there, thank you for the amazing guides. I'd really like to try this on my Unraid server but I do not have access to a Mac right now, mine broke and I don't want/can't afford to replace right now. I bought High Sierra a while back and still have the installation media .dmg saved to my backup. Is there a way to convert this .dmg into a vdisk for Unraid? That seems to be the only step that is tripping me up. I have access to Windows and I could spin up a Linux VM if need be. I've tried multiple methods using Transmac, Macdrive and OFSMount and had no luck. Simply renaming my "HighSierra.dmg" to .img and adding it to vdisk2 doesn't seem to work. I can go into more detail if it would help but perhaps there is an easy thing I'm missing. Thanks again Edited April 20, 2019 by alpaca_sandhog Quote Link to comment
bencarlos Posted April 21, 2019 Share Posted April 21, 2019 (edited) "Clover 4920 .... scan entries ...." I've udpated to 4920, from 4674 i believe and now it hangs/froze at the scan entries I'm switching manually to boot from my Transcend NVME SSD, but I left the clover qcow image for debugging. That qcow image works everytime. Do you need any more information? <?xml version='1.0' encoding='UTF-8'?> <domain type='kvm' xmlns:qemu='http://libvirt.org/schemas/domain/qemu/1.0'> <name>mojave - NVME</name> <uuid>8a563bf3-ba31-db02-eec1-9b5a09834c27</uuid> <metadata> <vmtemplate xmlns="unraid" name="CoreOS" icon="coreos.png" os="coreos"/> </metadata> <memory unit='KiB'>4194304</memory> <currentMemory unit='KiB'>4194304</currentMemory> <memoryBacking> <nosharepages/> </memoryBacking> <vcpu placement='static'>2</vcpu> <cputune> <vcpupin vcpu='0' cpuset='0'/> <vcpupin vcpu='1' cpuset='1'/> </cputune> <os> <type arch='x86_64' machine='pc-q35-3.1'>hvm</type> <loader readonly='yes' type='pflash'>/usr/share/qemu/ovmf-x64/OVMF_CODE-pure-efi.fd</loader> <nvram>/etc/libvirt/qemu/nvram/8a563bf3-ba31-db02-eec1-9b5a09834c27_VARS-pure-efi.fd</nvram> <boot dev='hd'/> </os> <features> <acpi/> <apic/> </features> <cpu mode='host-passthrough' check='none'> <topology sockets='1' cores='2' threads='1'/> </cpu> <clock offset='utc'> <timer name='rtc' tickpolicy='catchup'/> <timer name='pit' tickpolicy='delay'/> <timer name='hpet' present='no'/> </clock> <on_poweroff>destroy</on_poweroff> <on_reboot>destroy</on_reboot> <on_crash>restart</on_crash> <devices> <emulator>/usr/local/sbin/qemu</emulator> <disk type='file' device='disk'> <driver name='qemu' type='qcow2' cache='writeback'/> <source file='/mnt/cache/domains/clover.qcow2'/> <target dev='hdc' bus='sata'/> <address type='drive' controller='0' bus='0' target='0' unit='2'/> </disk> <controller type='usb' index='0' model='ich9-ehci1'> <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x7'/> </controller> <controller type='usb' index='0' model='ich9-uhci1'> <master startport='0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x0' multifunction='on'/> </controller> <controller type='usb' index='0' model='ich9-uhci2'> <master startport='2'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x1'/> </controller> <controller type='usb' index='0' model='ich9-uhci3'> <master startport='4'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x2'/> </controller> <controller type='sata' index='0'> <address type='pci' domain='0x0000' bus='0x00' slot='0x1f' function='0x2'/> </controller> <controller type='pci' index='0' model='pcie-root'/> <controller type='pci' index='1' model='pcie-root-port'> <model name='pcie-root-port'/> <target chassis='1' port='0x10'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x0' multifunction='on'/> </controller> <controller type='pci' index='2' model='pcie-root-port'> <model name='pcie-root-port'/> <target chassis='2' port='0x11'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x1'/> </controller> <controller type='pci' index='3' model='pcie-root-port'> <model name='pcie-root-port'/> <target chassis='3' port='0x12'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x2'/> </controller> <controller type='pci' index='4' model='pcie-root-port'> <model name='pcie-root-port'/> <target chassis='4' port='0x13'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x3'/> </controller> <controller type='virtio-serial' index='0'> <address type='pci' domain='0x0000' bus='0x02' slot='0x00' function='0x0'/> </controller> <interface type='bridge'> <mac address='52:54:00:68:bd:49'/> <source bridge='br0'/> <model type='vmxnet3'/> <address type='pci' domain='0x0000' bus='0x01' slot='0x00' function='0x0'/> </interface> <serial type='pty'> <target type='isa-serial' port='0'> <model name='isa-serial'/> </target> </serial> <console type='pty'> <target type='serial' port='0'/> </console> <channel type='unix'> <target type='virtio' name='org.qemu.guest_agent.0'/> <address type='virtio-serial' controller='0' bus='0' port='1'/> </channel> <input type='tablet' bus='usb'> <address type='usb' bus='0' port='3'/> </input> <input type='mouse' bus='ps2'/> <input type='keyboard' bus='ps2'/> <hostdev mode='subsystem' type='pci' managed='yes'> <driver name='vfio'/> <source> <address domain='0x0000' bus='0x01' slot='0x00' function='0x0'/> </source> <address type='pci' domain='0x0000' bus='0x03' slot='0x00' function='0x0'/> </hostdev> <hostdev mode='subsystem' type='usb' managed='no'> <source> <vendor id='0x045e'/> <product id='0x0745'/> </source> <address type='usb' bus='0' port='1'/> </hostdev> <hostdev mode='subsystem' type='usb' managed='no'> <source> <vendor id='0x093a'/> <product id='0x2510'/> </source> <address type='usb' bus='0' port='2'/> </hostdev> <hostdev mode='subsystem' type='pci' managed='yes'> <driver name='vfio'/> <source> <address domain='0x0000' bus='0x1c' slot='0x00' function='0x0'/> </source> <rom file='/mnt/cache/domains/Lexa.rx550.rom'/> <address type='pci' domain='0x0000' bus='0x04' slot='0x00' function='0x0'/> </hostdev> <memballoon model='none'/> </devices> <qemu:commandline> <qemu:arg value='-usb'/> <qemu:arg value='-device'/> <qemu:arg value='usb-mouse,bus=usb-bus.0'/> <qemu:arg value='-device'/> <qemu:arg value='usb-kbd,bus=usb-bus.0'/> <qemu:arg value='-device'/> <qemu:arg value='isa-applesmc,osk=xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx'/> <qemu:arg value='-smbios'/> <qemu:arg value='type=2'/> <qemu:arg value='-cpu'/> <qemu:arg value='Penryn,vendor=GenuineIntel,kvm=on,+invtsc,+avx,+avx2,+aes,+xsave,+xsaveopt,+ssse3,+sse4_2,+popcnt,vmware-cpuid-freq=on,'/> </qemu:commandline> </domain> EFI.zip Edited April 21, 2019 by bencarlos exposed key Quote Link to comment
alpaca_sandhog Posted April 21, 2019 Share Posted April 21, 2019 On 4/20/2019 at 10:16 PM, alpaca_sandhog said: Hi there, thank you for the amazing guides. I'd really like to try this on my Unraid server but I do not have access to a Mac right now, mine broke and I don't want/can't afford to replace right now. I bought High Sierra a while back and still have the installation media .dmg saved to my backup. Is there a way to convert this .dmg into a vdisk for Unraid? That seems to be the only step that is tripping me up. I have access to Windows and I could spin up a Linux VM if need be. I've tried multiple methods using Transmac, Macdrive and OFSMount and had no luck. Simply renaming my "HighSierra.dmg" to .img and adding it to vdisk2 doesn't seem to work. I can go into more detail if it would help but perhaps there is an easy thing I'm missing. Thanks again As an update. I decided to use a VirtualBox VM temporarily which did the trick. Quote Link to comment
cherritaker Posted April 27, 2019 Share Posted April 27, 2019 Since radeon gpu run natively on osx could if i follow this tutorial just not do the nvidia part and stick a RX 580 instead would i have video and audio working? Or do i still need to modify some of it? I followed the tutorial complete using a Nvidia Gt 710 and everything worked but i could not get hdmi audio working at all. Now i want to test a RX 580 and see if it will run out of the box without modifications. Thanks. Quote Link to comment
dgwharrison Posted April 28, 2019 Share Posted April 28, 2019 (edited) Hi guys, I've gone through the video and double checked everything, I've done the Disk Utility Erase and I'm at the point where you select 'Install macOS'. The problem I'm having is after I press continue, it does nothing but the continue button is greyed out. For example I can click other selections but nothing ever seems to happen. I'm using High Sierra. Looks like this: How do I get it to move on? I've tried restarting several times, tried double clicking instead of select then continue. I don't know what it's problem is. Edit: one thing I note is that because I tried APFS the first time, I can't go back to HFS for whatever reason. The vdisk is on an NVMe cache though so I thought that APFS would be fine. Edited April 28, 2019 by dgwharrison Quote Link to comment
Spies Posted April 30, 2019 Share Posted April 30, 2019 (edited) My Mojave VM is crashing after the Apple logo, it worked fine last time I used it, have there been any update in 6.6.6 that could have caused it? Edited April 30, 2019 by Spies Quote Link to comment
TheBlueKingLP Posted May 10, 2019 Share Posted May 10, 2019 On 3/28/2019 at 4:26 AM, lixe said: Was someone able to install the latest version of clover (4895)? I'm using 4674 right now an it works absolutely fine. If I update to 4895 or 4901 (which was released nearly an hour ago), I can't boot anymore. I get stuck at the TianoCore logo. I've discovered a new driver AudioDxe-64.efi, which I guessed I won't need anyway and sounds like it could cause problems. After deleting it it shows "clover 4895, scan entries". But nothing more happens. Tried it with HFSPlus.efi and VBoxhfs.efi, neither worked and also not both at the same time... Beside that, I don't use any unusual drivers. Also tried replacing the new drivers64UEFI folder with my backed up one, but won't boot either. The image attached shows all the driver I'm currently using with clover 4674. EDIT: I've also tried removing my old drivers64UEFI folder before the installation, so all drivers will get installed. After that I've copied the Apple* ones over, but also doesn't work. EDIT2: So I found a version which could maybe work (4862 from tonymacx86). My external USB backup drive (HFS+) is recognized. But usually I'm using an NVMe drive with APFS. I'm pretty sure the APFS filesystem isn't working properly... and I've already tried different drivers. EDIT3: Finally got it working (at least 4862 from tonymacx86). The problem was ApfsDriverLoader-64.efi. Had to delete it completely and instead use only apfs-patched.efi. Now its working so far Where can I find apfs-patched.efi? Quote Link to comment
Dr. Ew Posted May 10, 2019 Share Posted May 10, 2019 39 minutes ago, TheBlueKingLP said: Where can I find apfs-patched.efi? Send me a PM, I can help you out? Has anyone had luck getting 10GbE to work in High Sierra? I spun up a few MacOS VM's and can't get networking active. I only tried in HS, trying in mojave next. I may have to plug in gigabitE to get it to work in HS. Curious if anyone else has the same issue? Quote Link to comment
1812 Posted May 10, 2019 Share Posted May 10, 2019 42 minutes ago, Dr. Ew said: Send me a PM, I can help you out? Has anyone had luck getting 10GbE to work in High Sierra? I spun up a few MacOS VM's and can't get networking active. I only tried in HS, trying in mojave next. I may have to plug in gigabitE to get it to work in HS. Curious if anyone else has the same issue? 10gbe is "suppose" to work with the vmxnet3 virtual interface but falls laughably short in both high Sierra and Mojave. It also has some weird issues with upload speeds to some websites. My discover and ultimate disappointment are here: I do run a solar flare 10gbe card passed through with no issues on high Sierra (haven't tried Mojave with it due to nvidia driver unavailability with that vm's gpu). iPerf shows 9.1-9.5Gbps to my server from the vm. Quote Link to comment
Leoyzen Posted May 12, 2019 Share Posted May 12, 2019 On 3/28/2019 at 4:26 AM, lixe said: Was someone able to install the latest version of clover (4895)? I'm using 4674 right now an it works absolutely fine. If I update to 4895 or 4901 (which was released nearly an hour ago), I can't boot anymore. I get stuck at the TianoCore logo. I've discovered a new driver AudioDxe-64.efi, which I guessed I won't need anyway and sounds like it could cause problems. After deleting it it shows "clover 4895, scan entries". But nothing more happens. Tried it with HFSPlus.efi and VBoxhfs.efi, neither worked and also not both at the same time... Beside that, I don't use any unusual drivers. Also tried replacing the new drivers64UEFI folder with my backed up one, but won't boot either. The image attached shows all the driver I'm currently using with clover 4674. EDIT: I've also tried removing my old drivers64UEFI folder before the installation, so all drivers will get installed. After that I've copied the Apple* ones over, but also doesn't work. EDIT2: So I found a version which could maybe work (4862 from tonymacx86). My external USB backup drive (HFS+) is recognized. But usually I'm using an NVMe drive with APFS. I'm pretty sure the APFS filesystem isn't working properly... and I've already tried different drivers. EDIT3: Finally got it working (at least 4862 from tonymacx86). The problem was ApfsDriverLoader-64.efi. Had to delete it completely and instead use only apfs-patched.efi. Now its working so far I found something interesting according here, you should use qcow2 instead of raw to make new version clover work. But it not seems to recognized my apfs dirver, only hfs+ works Quote Link to comment
GreenEyedMonster Posted May 14, 2019 Share Posted May 14, 2019 My mouse control in VNC when installing everything just SUCKS. No direct control. Any advice on how to fix that? Quote Link to comment
nasforthemass Posted May 15, 2019 Share Posted May 15, 2019 17 hours ago, GreenEyedMonster said: My mouse control in VNC when installing everything just SUCKS. No direct control. Any advice on how to fix that? I did not enjoy VNC through a browser when setting up my VM. All my issues were solved once I used a VNC software on a separate computer on the local network! for me, i ran "VNC Viewer" and TurboVNC Viewer" from my main mac. 1 Quote Link to comment
frodr Posted May 15, 2019 Share Posted May 15, 2019 Hi, MacOS kvm is running. Also running with GTX 1070 passthru, but the GPU is not seen by the OS. The GTX 1070 is a Mac flashed GPU from Macvidcards, is such likely to work? If yes, then the question is what must cange in my setup? Link to the xml: https://www.dropbox.com/sh/3x5cqsy6nloqb5n/AAAHZdhRSx8DKxJdgT6_YxD7a?dl=0 Quote Link to comment
GreenEyedMonster Posted May 18, 2019 Share Posted May 18, 2019 So I have everything running great till I try to install my GPU. I have a rx580 4gb and it works on my Windows VM. I have never used Clover before so I am unsure what to do to get it running. Do I have to install anything specific or special? Passthrough the GPU bios? Thanks! Quote Link to comment
Jagadguru Posted May 18, 2019 Share Posted May 18, 2019 Do you think it would be possible to run an Apple Thunderbolt Display? They are getting pretty cheap now on Craigslist. Quote Link to comment
Jagadguru Posted May 18, 2019 Share Posted May 18, 2019 On 5/15/2019 at 6:58 PM, frodr said: Hi, MacOS kvm is running. Also running with GTX 1070 passthru, but the GPU is not seen by the OS. The GTX 1070 is a Mac flashed GPU from Macvidcards, is such likely to work? If yes, then the question is what must cange in my setup? Link to the xml: https://www.dropbox.com/sh/3x5cqsy6nloqb5n/AAAHZdhRSx8DKxJdgT6_YxD7a?dl=0 Most NVIDIA cards, including the GTX 1070 will not have acceleration even if you do get them to work in Mojave because there are no Webdrivers released from NVIDIA for Mojave yet. I think these cards worked in High Sierra however. I've been using an inexpensive GT 710 in my Mojave. It works great. But then I don't do anything demanding like modern games or rendering. Acceleration works. Quote Link to comment
milanp Posted May 21, 2019 Share Posted May 21, 2019 On 3/27/2019 at 9:26 PM, lixe said: Was someone able to install the latest version of clover (4895)? I'm using 4674 right now an it works absolutely fine. If I update to 4895 or 4901 (which was released nearly an hour ago), I can't boot anymore. I get stuck at the TianoCore logo. I've discovered a new driver AudioDxe-64.efi, which I guessed I won't need anyway and sounds like it could cause problems. After deleting it it shows "clover 4895, scan entries". But nothing more happens. Tried it with HFSPlus.efi and VBoxhfs.efi, neither worked and also not both at the same time... Beside that, I don't use any unusual drivers. Also tried replacing the new drivers64UEFI folder with my backed up one, but won't boot either. The image attached shows all the driver I'm currently using with clover 4674. EDIT: I've also tried removing my old drivers64UEFI folder before the installation, so all drivers will get installed. After that I've copied the Apple* ones over, but also doesn't work. EDIT2: So I found a version which could maybe work (4862 from tonymacx86). My external USB backup drive (HFS+) is recognized. But usually I'm using an NVMe drive with APFS. I'm pretty sure the APFS filesystem isn't working properly... and I've already tried different drivers. EDIT3: Finally got it working (at least 4862 from tonymacx86). The problem was ApfsDriverLoader-64.efi. Had to delete it completely and instead use only apfs-patched.efi. Now its working so far Does this apfs-patched.efi work with Mojave ? Where to get it? Quote Link to comment
BigSpoonzz Posted May 24, 2019 Share Posted May 24, 2019 On 4/21/2019 at 5:54 PM, alpaca_sandhog said: As an update. I decided to use a VirtualBox VM temporarily which did the trick. Sorry to jump in here a few weeks late... I too, followed the Spaceinvader updated HSierra/Mojave video guide. I bumped up to the latest version of clover, (4920) thinking that would be most compatible with Unraid 6.7 stable. I get stuck on "Scanning" as well... when you say you chose VirtualBox, where did you do this? in the setup of the VM, not using the SATA suggestion of SpaceInvader? also, did you remove the topology folks are mentioning? Thanks much, just been scanning the forums for someone with a similar predicament. I was up until 3:30 trying to get it to work, and couldn't figure out what I was doing wrong. I wiped and tried 4 different times following the videos exactly, then updating clover, then downgrading Unraid from an RC version to a stable version. No luck. Any advice is helpful. Quote Link to comment
WashingtonMatt Posted May 25, 2019 Share Posted May 25, 2019 I had the same issue. I just rolled back clover to 46xx until I had time to dig into it more. Quote Link to comment
rpj2 Posted May 27, 2019 Share Posted May 27, 2019 I followed the video and had Mojave working fine. I've since upgraded to 6.7.0 and tried to start the VM today. When I connect to it, I see like 10 copies of it. I'm not sure what caused this or how to fix it. Quote Link to comment
Jagadguru Posted May 27, 2019 Share Posted May 27, 2019 Go back and check your resolution in OVMF. Make sure it matches your clover resolution. 1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.