Leaderboard

Popular Content

Showing content with the highest reputation on 04/11/21 in all areas

  1. It's a bug, mover isn't working for shares with a space in the name, you should create a bug report. As a workaround you can rename the share, using for example an underscore.
    2 points
  2. 1 point
  3. If you did a format then that would create an empty file system and update parity to reflect this. When you try and format you get a big warning telling you that format is not part of a rebuild. if you still have the old disk intact it should be possible to mount it using UD and then copy the files back to the array.
    1 point
  4. Unraid does not automatically format a drive. If the drive came up as unmountable either prior to or after the rebuild process, a popup would have showed up that stated that "Formatting is never part of a rebuild process". Did you tell Unraid to format the drive? This is what caused the problem. By changing the format of the drive, it basically would've had to format the drive. (But still would have prompted you) What you want to do is take a note of all the current drive assignments, do a Tools - New Config, and then reassign the drives and substitute the ori
    1 point
  5. Hatte ich damals bei meiner macOS-VM auch. Lag bei mir am falschen Model des virtuellen Adapters. Meine funktionierende Config dazu sieht so aus: <interface type='bridge'> <mac address='XX:XX:XX:XX:XX:XX'/> <source bridge='br0'/> <model type='e1000-82545em'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x05' function='0x0'/> </interface>
    1 point
  6. PM is a Miner for GPUs -see https://phoenixminer.org/ I would recomend to read about cryptos first. But basically it is possible to mine ETH with a CPU but very much not recomended. Have a look at monero for that purpose. came to this thread to point out that you have to install and start the docker first w/o the extra parameter for nvidia. than the docker will start but give you an error. Edit the docker and add the nvidia parameter => starts up fine. my 1070 does around 28MH/s which can be tweaked by some overclocking & undervolting (to around 30-32) which
    1 point
  7. Stop the array but don't shut down or reboot. After it finishes stopping the array (or if it doesn't) post diagnostics. See here for how "unclean shutdown" works:
    1 point
  8. You probably filled it up See this recent thread for a fairly detailed discussion on settings that help keep you from filling disks:
    1 point
  9. I think the issues are due to changes at ookla (could be wrong though). Either way, I'm having CA mark 2018.02.11 as being incompatible as it doesn't work at all.
    1 point
  10. I never passed thru USB controllers just used USB mapping in VMs. But no issues. There are plugins to allow dynamic mapping , including one of my own(usbip-gui beta) which has expanded past just USBIP, currently changing to name to USB_Manager and making the USBIP optional. Do you have any devices of the same Vendor/model you want to passthru? The disk port to the HBA will run at 6Gps if the drive supports it. The PCIe Connections are 1 PCI-E 3.0 x8 (in x16 slot), 1 PCI-E 3.0 x8 1 PCI-E 2.0 x4 (in x8 slot)
    1 point
  11. Die Fehlermeldung geht auch nicht weg, die besteht bis in alle Ewigkeit. WICHTIG ist zu gucken ob sich die Fehleranzahl erhöht. Nur wenn die sich ändert/erhört existiert das Problem weiterhin. Bleibt die gleich, ist das nur eine Info, dass es mal einen Fehler gab. Und UDMA_CRC_Error hat halt seltenst etwas mit der HDD/SSD zu tun. Kabel, Stecker, Buchsen und ganz eventuell noch die Controller (sowohl auf dem Board als auch auf der HDD/SSD). Auch ungefähr in der Reihenfolge - das sind die Übeltäter.
    1 point
  12. @JorgeB can you see if this fixes it: (and doesn't cause any other issues - It shouldn't) Save the attached as /usr/local/sbin/mover (and give it executable permissions) mover
    1 point
  13. No, this is not the case with every Docker template but game servers are not normal Containers in terms of port forwarding. Take Valheim for example, the default game port for example is 2456 (game port) then there is the port 2457 (query port) and the port 2458 (I don't know what it's exactly for but if you close it you cannot connect to the server). When you try to actually connect to the game, the game tries to connect to the default query port to get all necessary information on port 2457 and the query port actually responds with a message to the game that the game port is on 245
    1 point
  14. Both no problem.
    1 point
  15. Is the Card already flashed to IT Mode? If not you should re-flash. https://flemmingss.com/how-to-flash-it-mode-firmware-to-hp-lsi-sas-9212-4i-controller-card/
    1 point
  16. Thank you for your help. I would have ran into the same issue with cloning the share. Problem should be solved with renaming.
    1 point
  17. Share doesn't yet exist on that disk, once it does space will be correct.
    1 point
  18. Hi, I have a X10SL7-F which is similar with a built in SAS HBA and one less slots. The HBA will connect multiple devices and will support SAS and SATA drives. Normally they tend to have a couple of ports and you will need a fan out cable to connect to the drives. This is now my test box so dont have a GPU installed and using passthru, but did have a GT710 when it was my prod server and passed it thru to a WIn10 VM. And used the IPMI for console which uses the ASPEED VGA Screen so dont need to have a monitor connected. Also I have an 16 port
    1 point
  19. I don't know if they can accept a registration. But with "synapse admin" you can easily see who has registered and assign roles or create users yourself. just download it from the app store and test it
    1 point
  20. Mh did nothing other then restart the MagicMirror2 Docker. Now the Log is no longer 18GB in size. The Logfiles of MM did grow over the last weeks. I restarted unraid and the docker multible times. feels like the docker knew i would open a helpthread and deleted it it self. sorry for your time.
    1 point
  21. Due to overwhelming demand (3 people 😂), I've just released a new version works with both AMD and likely Nvidia GPUs as well. You'll need to re-add the container from CA and use the repository to lnxd/xmrig:latest-root to use the new features; it'll probably get picked up some time within the next 2 hours. I haven't got an Nvidia GPU to test it with so if someone gets it working with one, please let me know. But be patient, it takes around 10 mins to install Cuda for me before it gets to the mining stage, I'm gonna work on reducing that when I get a chance. It now includes XMRig 6.
    1 point
  22. I got the same error when I updated to 21.0.1, and for me, it turned out to be the "external storage" application (which I'm using to get access to SMB shares in the Nextcloud app) I got this fixed by simply removing the "files_external" folder found in: \\YourServer\appdata\nextcloud\www\nextcloud\apps\ However, now I can't see the External Storages- application within the appstore of NC, so I'm trying to figure out how to re-install said app in order to access the SMB shares once again. EDIT! Haven't done a-lot of testing yet, but I think I got everything t
    1 point
  23. Damn, my post was delayed by the stupid forum reboot and I am late to the party !
    1 point
  24. CRC errors are a known issue with some Samsung SSDs and those AMD chipsets, other issue looks like a hardware problem, like a bad PSU, CPU, board, etc.
    1 point
  25. Thank you @cakes044! I got It working on my X570D4U-2L2T. ipmi2json worked when I switched all the fans to manual mode in the BMC. Think $manual_cmd wasn't doing it for me for some reason. Didn't look too hard since there's a workaround. I also had to adjust the fan positions in the board.json as they were bumped down by one. ipmifan does work great as-is though! Thanks again.
    1 point
  26. @ChatNoir - I didn't. I will be once I recover. @JorgeB - I think the PCI-E slot on my X399 motherboard failed or something. I spent the last 4 hours migrating my i7700K board, memory and CPU to my UNRAID system, managed to get all drives assigned (except my cache pool), checked parity valid and started the array. It looks like everything is being seen and there is at least data on each of the drives now. I am running the parity check now, I did notice that it found quite a few errors already (perhaps its fixing the replacement drive that's blank). Looking at the "MAIN page"
    1 point
  27. Is anyone interested in some of the settings to get this working using flux (influxdb v2.0 language / API). Have gotten about half of the queries re-written for it atm.
    1 point
  28. Bingo. That sorted it, thanks. I'd got an old rule blocking port 80 sitting at the bottom of my rules list that I'd missed and forgotten to disable again. I've unblocked it and Letsencrypt can now issue the certificate 😊
    1 point
  29. Ja super!! Ne, bei mir läuft alles.. frag nur interessehalber. Ja, die Soundkarte sollte generell immer mit auf den gleichen bus gesetzt werden, so wie es "original" auch ist. Was die Konfiguration betrifft, ist macOS deutlich "empfindlicher"... Aber wenn richtig konfiguriert, dann stabil, schnell und effizient. Nur mal so btw... Bei idle Betrieb mit aktivem Displayoutput spart macOS gegenüber Windows ca. 20w bei meinem Server...
    1 point
  30. Thanks for the heads up @Squid! A very good call to do this after the recent wave of compromised servers with XMRig running. I'll update OP. And @jonathanm that recommendation made me laugh this morning, it was one of the first things I read when I woke up and it's very true 🤣 Hey @Steace! Yup you sure do. Otherwise it'll be a looooonngg time to payout. Just make sure you note their transaction fee when you're reducing the value. If you slip it into the worker field it should work, eg. Unraid/test@example.com. Then just let it mine for a while befo
    1 point
  31. Danke für den Tipp bezüglich der cfg-Files, die benötigte ist die /boot/config/smart-one.cfg [VMware_Virtual_NVMe_Disk_VMWare_NVME-0000] hotTemp="11760" maxTemp="11780" Einen feature request werde ich morgen erstellen, wobei ich kaum glaube, dass die Anfrage auf der road map landet.
    1 point
  32. Er meint PlugIns innerhalb von Magic Mirror...
    1 point
  33. As long as you are on the latest version of the Unraid.net plugin, there isn't anything else you need to do. Once we get the connection issues resolved this logging will stop. Thanks for helping us test!
    1 point
  34. I have a xeon e5-2690v3 and had --asm intel and --randomx-1gb-pages but I could never seem to get the 1gb pages to work. When I removed those two arguements my H/s actually went UP about 200 H/s. I have no idea why. Have you done before/after to see what difference they are making? Also, can you tell in your container log that your actually getting 1gb pages?
    1 point
  35. Constant disk activity Just installed the Paperless-ng and Redis dockers and it works, very nice:) My only issue is that the Redis docker produces a constant disk activity (super steady 144 KB/s write, no read activity) at all times. I removed all documents from Paperless-ng but the disk activity still persists. As soon as I stop the Paperless-ng docker the disk activity of the Redis docker stops, so it definitely has something to do with Paperless-ng. This seems to be a bug, why would Redis need a constant 150KB/s write stream when there is no activity at all in t
    1 point
  36. 1 point
  37. @xthursdayx It is actually much easier than that. Simply copy the contents of your "/mnt/user/appdata/rutorrent/rtorrent/rtorrent_sess" into the following folder : "/mnt/user/appdata/binhex-rtorrentvpn/rtorrent/session" Everything should be good to go.
    1 point
  38. If your DNS is resolving to cloudflare are you 100% sure the '/config/letsencrypt-acme-challenge' is also forwarded correctly? Letsencrypt needs to contact your server (over http) to verify the signature.
    1 point
  39. Without the diagnostics, assuming that it's very early in the boot process when it's initializing the cores, it's not a problem and safe to ignore.
    1 point
  40. Thanks @bytchslappa for the heads up. Everyone using a User Script for Nvidia GPU Power State just edit the script to: #!/bin/bash nvidia-persistenced fuser -v /dev/nvidia* and leave the schedulle At first Array start only unchanged.
    1 point
  41. Yes that possible, just put multiple IP's to that field separated by a comma.
    1 point
  42. For me, I had to open up the query and then right click on the icon. However, it still is not working for me. I've tried a mix of HTTPS and HTTP to no avail.
    1 point
  43. Right now this link is dead. I'll check it later. here is the new issue i created. If you want you can do a comment there with your steps. and if you have the error still. https://github.com/linuxserver/docker-nextcloud/issues/189 Edit* Check the issue for the solution. TL?DR? Update docker, delete /config/nginx/site-confs/default, restart docker, Go to Settings > Overview, (for chrome) Press F12 and while having dev tools open right click refresh button and click emtpy cache and hard reload.
    1 point
  44. OK guys, multi remote endpoint support is now in for this image please pull down the new image (this change will be rolled out to all my vpn images shortly). What this means is that the image will now loop through the entire list, for example, pia port forward enabled endpoints, all you need to do is edit your ovpn config file and add the remote endpoints at the top and sort into the order you want them to be tried, an example pia ovpn file is below (mine):- remote ca-toronto.privateinternetaccess.com 1198 udp remote ca-montreal.privateinternetaccess.com 1198 udp remote ca-vanc
    1 point
  45. Is the process still so complex in Oct 2019, for the linux untrained? I want to share my /mnt/user to my NethServer . Can I have a step by step "stupid-proof" guide?
    1 point
  46. I used the plugin "Nerd Tools". Installed "kbd-1.15.3-x86_64-2.txz" (Settings - Nerd Pack) and added this to the go file on flash for Swedish keyboard (qwerty) in terminal etc: # load keyboard layout loadkeys se-latin1 For german (qwertz), you have these: de-latin1-nodeadkeys de-latin1 de-mobii de de_CH-latin1 de_alt_UTF-8 Add and reboot (you can also try it out by running "loadkeys de-latin1-nodeadkeys" in the server terminal without rebooting ofc). You could also download kbd-1.15.3-x86_64-2.txz manually and put it in to flash/extra folder and it will instal
    1 point
  47. Ok so I just added a path in the Krusader container settings (attached), restarted the container, and that seemed to solve the issue.
    1 point
  48. Read this post and the next half-dozen and see if any one of these situations apply to you: Also, on your Windows computer, go to 'Control Panel' and then 'Credential Manager' to see if Windows is storing any login credentials.
    1 point