limetech Posted June 14, 2022 Share Posted June 14, 2022 The primary purpose of this release is to address an issue seen with many HP Microserver Gen8/9 servers (and other platforms) where data corruption could occur if Intel VT-d is enabled. ALL USERS are encouraged to update. As always, please make a flash back up before upgrading: Main/Flash/Flash Backup. While we have not identified the exact kernel commit that introduced this issue, we have identified a solution that involves changing the default IOMMU operational mode in the Linux kernel from "DMA Translation" to "Pass-through" (equivalent to "intel_iommu=pt" kernel option). At first, we thought the 'tg3' network driver was the culprit; however, upon thorough investigation, we think this is coincidental and we have also removed code that "blacklists" the tg3 driver. Special thanks to @JorgeB who helped characterize and report this issue, as well as helping many people recover data when possible. Please refer to the Unraid OS 6.10.3-rc1 announcement post for more information. Version 6.10.3 2022-06-14 Improvements Fixed data corruption issue which could occur on some platforms, notably HP Microserver Gen8/9, when Intel VT-d was enabled. This was fixed by changing the Linux kernel default IOMMU operation mode from "DMA Translation" to "Pass-through". Also removed 'tg3' blacklisting when Intel VT-d was enabled. This was added in an abundance of caution as all early reports of data corruption involved platforms which also (coincidentally) used 'tg3' network driver. If you created a blank 'config/modprobe.d/tg3.conf' file you may remove it. Plugin authors: A plugin file may include a tag which displays a markdown formatted message when a new version is available. Use this to give instructions or warnings to users before the upgrade is done. Brought back color-coding in logging windows. Bug fixes Fix issue detecting Mellanox NIC. Misc. webGUI bug fixes Change Log vs. Unraid OS 6.10.2 Base distro: no changes Linux kernel: version 5.15.46-Unraid CONFIG_IOMMU_DEFAULT_PASSTHROUGH: Passthrough Management: startup: improve network device detection webgui: Added color coding in log files webgui: In case of flash corruption try the test again webgui: Improved syslog reading webgui: Added log size setting when viewing syslog webgui: Plugin manager: add ALERT message function webgui: Add INFO icon to banner webgui: Added translations to PageMap page webgui: Fix: non-correcting parity check actually correcting if non-English language pack installed webgui: Updated azure/gray themes Better support for Firefox Move utilization and notification indicators to the right 14 3 1 Quote Link to comment
Hitcher Posted June 14, 2022 Share Posted June 14, 2022 Can VT-d be re-enabled on Gen 8 servers now or is there no real need to? Quote Link to comment
JonathanM Posted June 15, 2022 Share Posted June 15, 2022 2 hours ago, Hitcher said: Can VT-d be re-enabled on Gen 8 servers now or is there no real need to? If you need it, you can re-enable. If you don't need it, don't bother. 1 Quote Link to comment
mmmeee15 Posted June 15, 2022 Share Posted June 15, 2022 Could you provide more information on the Mellanox NIC bug fix? I have 2 connectx-2 cards flashed to ethernet mode (with the unraid plugin). The cards were correctly detected and showing up in the plugin, but the link appeared down even though it was properly connected. Could this be related, or is my qsfp cable bad? Also there were a few strange issues with the network config of other NICs when the mellanox card was plugged in. It wasn't a critical issue at the time, so I dropped the matter, but if it is fixed now, it would be great to have 10gbit. Quote Link to comment
JorgeB Posted June 15, 2022 Share Posted June 15, 2022 1 hour ago, mmmeee15 said: Could this be related Unlikely, AFAIK the only thing that changed is the device detection during boot, that looks more like driver/initialization issue, I would recommend starting a new thread in the general support forum and please don't forget the diagnostics. Quote Link to comment
Kagami Hiiragi Posted June 15, 2022 Share Posted June 15, 2022 This update bricked my system. I attached monitor and there's no anything on the screen after the BIOS screen. Network card was blinking but I wasn't able to ping it. Thankfully I made boot drive backup right before the update. So I flashed it again and now it works fine (on 6.10.2). Unfortunately I made backup right during the parity check (scheduled on 15th of every month) and it started another parity check right after the boot and instantly found 1 error... I hope it's some bug when parity starts after the boot, because it finished today without any errors, before I upgraded to 6.10.3. Quote Link to comment
mmmeee15 Posted June 15, 2022 Share Posted June 15, 2022 27 minutes ago, JorgeB said: Unlikely, AFAIK the only thing that changed is the device detection during boot, that looks more like driver/initialization issue, I would recommend starting a new thread in the general support forum and please don't forget the diagnostics. Will do. I'm getting a new cable shortly, and will post if needed. Thank you Quote Link to comment
JorgeB Posted June 15, 2022 Share Posted June 15, 2022 10 minutes ago, Kagami Hiiragi said: I attached monitor and there's no anything on the screen after the BIOS screen. Do you mean right after the BIOS, i.e., you don't even see the Unraid boot menu? If that's true can't see how it can be because of the update. Quote Link to comment
Kagami Hiiragi Posted June 15, 2022 Share Posted June 15, 2022 3 minutes ago, JorgeB said: you don't even see the Unraid boot menu? Yes. Maybe it wasn't properly written to USB drive or something... I just clicked update & reboot via the web interface as usual and it wasn't bootable after that. Quote Link to comment
JorgeB Posted June 15, 2022 Share Posted June 15, 2022 3 minutes ago, Kagami Hiiragi said: Maybe it wasn't properly written to USB drive or something... Should still see something after the BIOS, like "no boot device found" or something similar. Quote Link to comment
BRiT Posted June 15, 2022 Share Posted June 15, 2022 Updated yesterday and so far so good. The system came up after reboot without issues. Quote Link to comment
xxlbug Posted June 15, 2022 Share Posted June 15, 2022 For anybody with a Dell R510: i can confirm that this update works for me with VT-d enabled. This was not the case with 6.10.2. Same seamless update process as in the last couple of years 🙂 1 Quote Link to comment
joggs Posted June 15, 2022 Share Posted June 15, 2022 Many of the sqlite images became broken after the upgrade, for example radarr and sonarr Quote Link to comment
jademonkee Posted June 15, 2022 Share Posted June 15, 2022 Updated my gen8 Microserver from 6.10.2 without incident. Decided to leave VT-d off in BIOS, as I don't use VMs anyhow. Sonarr and Radarr Dockers both started fine and GUIs load (haven't tried searching, but I don't think there'll be problems). Quote Link to comment
JorgeB Posted June 15, 2022 Share Posted June 15, 2022 48 minutes ago, joggs said: Many of the sqlite images became broken after the upgrade, for example radarr and sonarr I would guess unrelated to the update (if you updated from another v6.10.x release) but please start a new thread in the general support forum and don't forget to include the diagnostics after array start. Quote Link to comment
1812 Posted June 15, 2022 Share Posted June 15, 2022 why does it keep installing the newest Nvidia driver after every update? I use a gt for Plex and it always rolls to the latest vs keeping me on the 470.129.06 which is the one that works for this card. Quote Link to comment
pkoci1 Posted June 15, 2022 Share Posted June 15, 2022 It seems that Time machine backup has not been fixed and the host still cannot access containers on custom network via IPv6. Quote Link to comment
wgstarks Posted June 15, 2022 Share Posted June 15, 2022 19 minutes ago, pkoci1 said: It seems that Time machine backup has not been fixed and the host still cannot access containers on custom network via IPv6. The TimeMachine docker is working great for me. You might want to check that out. Supports AFP too although I haven’t tried that. Quote Link to comment
craigr Posted June 15, 2022 Share Posted June 15, 2022 Updated from 6.10.2 without issue. Quote Link to comment
Stitzer Posted June 16, 2022 Share Posted June 16, 2022 Humm upgraded turned virtualization back on I can get to my VM through NoMachine, but if i try to vnc from the vm manger it never connects. I read a post from 2018 or 2016 that talked about clearing cookies and fixing but that did not work here. Quote Link to comment
JorgeB Posted June 16, 2022 Share Posted June 16, 2022 5 hours ago, Stitzer said: I read a post from 2018 or 2016 that talked about clearing cookies and fixing but that did not work here. Try this: https://forums.unraid.net/bug-reports/stable-releases/6100-vnc-no-longer-connects-r1902/?do=findComment&comment=19746 Quote Link to comment
cobhc Posted June 16, 2022 Share Posted June 16, 2022 17 hours ago, 1812 said: why does it keep installing the newest Nvidia driver after every update? I use a gt for Plex and it always rolls to the latest vs keeping me on the 470.129.06 which is the one that works for this card. I believe that's because the update process checks that all plugins are up to date before asking you to reboot in the situation that there's an update that's needed for the plugin to be compatible with that version of Unraid. Not sure if this is something you can disable. Quote Link to comment
Jamaica1985 Posted June 16, 2022 Share Posted June 16, 2022 Everything works as expected however, both the main page and the dashboard show no hardware information whatsoever. I see no disks, no CPU stats, no Fan stats, no array however everything else is working just fine. Not sure where to start to troubleshoot this... Quote Link to comment
tjb_altf4 Posted June 16, 2022 Share Posted June 16, 2022 I don't want to be that guy, but the return of syslog colouring has bled over to docker logs, which is now overwriting colouring where/if defined by those applications. Previous docker container log New docker container log Quote Link to comment
Zonediver Posted June 16, 2022 Share Posted June 16, 2022 Is this problem with "no reaction" after wakeup from sleep already solved at 6.10.3? Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.