alturismo Posted April 2, 2020 Share Posted April 2, 2020 39 minutes ago, ephigenie said: haven't found in the forum if 6.9.0-beta1 is already supported by the nvidia plugin ? did u took a look in the plugin if there is a 6.9 available ? i dont use it, but thats where i d look Link to comment
soloandy Posted April 2, 2020 Share Posted April 2, 2020 I'm trying to install nVidia Unraid Builds 6.8.3. But I got this message after the installation: NVIDIA-SMI has failed because it couldn't communicate with the NVIDIA driver. Make sure that the latest NVIDIA driver is installed and running. I have a nVidia GT710 installed (should be supported), and it has been recognized by the system. Does anyone have the same issue, how to solve this problem? Thanks! Link to comment
BRiT Posted April 2, 2020 Share Posted April 2, 2020 Not sure if I'm recalling things correctly or not, but ... I think because of the large level of efforts required that Beta builds are typically not targetted, only once they hit RC Release Candidates. In the past there have been over 3 non-RC builds released in a single day, and nearly half dozen in 1 week. 1 Link to comment
j0nnymoe Posted April 2, 2020 Share Posted April 2, 2020 5 hours ago, soloandy said: I'm trying to install nVidia Unraid Builds 6.8.3. But I got this message after the installation: NVIDIA-SMI has failed because it couldn't communicate with the NVIDIA driver. Make sure that the latest NVIDIA driver is installed and running. I have a nVidia GT710 installed (should be supported), and it has been recognized by the system. Does anyone have the same issue, how to solve this problem? Thanks! It's likely nvidia-smi doesn't support the 710. Link to comment
ephigenie Posted April 3, 2020 Share Posted April 3, 2020 On 4/2/2020 at 5:53 PM, BRiT said: Not sure if I'm recalling things correctly or not, but ... I think because of the large level of efforts required that Beta builds are typically not targetted, only once they hit RC Release Candidates. In the past there have been over 3 non-RC builds released in a single day, and nearly half dozen in 1 week. Oh i see, i didn't know about the amount of releases per day. Any chance to automate it ? Link to comment
JesterEE Posted April 3, 2020 Share Posted April 3, 2020 11 minutes ago, ephigenie said: Oh i see, i didn't know about the amount of releases per day. Any chance to automate it ? I suggest reading the linked comment on this thread, saying "Thank you!" for all the volunteered effort by the dev team, and waiting patiently. If you have some skills, maybe you can help though. I'm sure CHBMB and the rest if the team would appreciate another set of hands! 2 Link to comment
ephigenie Posted April 3, 2020 Share Posted April 3, 2020 13 minutes ago, JesterEE said: I suggest reading the linked comment on this thread, saying "Thank you!" for all the volunteered effort by the dev team, and waiting patiently. If you have some skills, maybe you can help though. I'm sure CHBMB and the rest if the team would appreciate another set of hands! Ok understood. I'll keep on reading this in full first. Thanks. And thank you for the Team who already put so much effort in making it happening. Link to comment
ZaDoctor Posted April 3, 2020 Share Posted April 3, 2020 I am getting "Checking SHA 256's: failed!". From my research earlier on this forum it is mentioned it might be a DNS issue. I have no idea where to begin trouble shooting this or how to fix it. Any help would be greatly appreciated, thanks. I do have xfinity/Comcast which has caused issues in the past if that is relevant at all. Also installing on unraid 6.8.3, I originally was on 6.8.2 but tried updating to see if that fixed it. My GPU is a Quadro K2200 which is listed as compatible. Link to comment
bigmac5753 Posted April 3, 2020 Share Posted April 3, 2020 Is an AMD version possible? I would happily donate generously to have AMD cards running in containers. Link to comment
Hoopster Posted April 3, 2020 Share Posted April 3, 2020 21 minutes ago, bigmac5753 said: Is an AMD version possible? I would happily donate generously to have AMD cards running in containers. Plex does not support AMD video cards in Linux; just Windows. Don't know about other containers where it may be used. Link to comment
bigmac5753 Posted April 4, 2020 Share Posted April 4, 2020 10 hours ago, Hoopster said: Plex does not support AMD video cards in Linux; just Windows. Don't know about other containers where it may be used. There's several containers I have in mind including folding@home. Link to comment
j0nnymoe Posted April 4, 2020 Share Posted April 4, 2020 1 hour ago, bigmac5753 said: There's several containers I have in mind including folding@home. I don't actually believe AMD provide the same solutions for using their cards within docker like nvidia do. Link to comment
binarygeek119 Posted April 6, 2020 Share Posted April 6, 2020 can i run multi gpu for one docker app below is my setup i like to do have two gpus setup for one tdarr app working on transcodes GeForce GTX 950 unraid nvidia docker tdarr GeForce GTX 950 the above setup would be great so i can have more transcodes about i would like to add plex to the mix too Link to comment
Markland Posted April 7, 2020 Share Posted April 7, 2020 (edited) First specs: unraid 6.8.2 - from the version from the unraid nvidia plugin threadripper 1950X 128GB Ram 3 x gtx970 1 x quadro 2000 Hi Guys. I just have a quick question for everyone using the netdata docker in conjunction with unraid nvidia and also everyone else . I have been trying to pass through my gpus to netdata for like the last 2 weeks trying all different kinds of steps like putting in the correct extra parameters into the docker. I followed what others have done like: On 3/10/2019 at 1:06 AM, Xaero said: Got this working in netdata! So, don't worry about grabbing a special version, the version from Community Apps is fine. Steps to reproduce: Grab the docker from Community Apps. During the initial container install switch to advanced view, and add --runtime=nvidia to the end of the list. Add a new variable "NVIDIA_VISIBLE_DEVICES" with the value set to "all" Click done, and let the docker install. Open a console for the docker. echo "nvidia_smi: yes" >> /etc/netdata/python.d.conf Restart the docker. Enjoy. But even with that I cant see nvidia-smi in the docker from the console. I have a folding at home docker and that can see nvidia-smi with no issues but I cant seem to get it to work with the netdata docker. Others have also had this issue with the docker. Are we doing something wrong? Steps I have tried: Just one gpu Uninstalling and reinstalling apps, dockers, plugins, Passing through individual UUIDs of cards rather than just "all" Running scrips mentioned by others to make sure the correct config is edited I even went as far as installing random dockers and putting in the above variable and parameters and nvidia-smi worked in them.... Edited April 7, 2020 by Markland be more inclusive Link to comment
aussben Posted April 7, 2020 Share Posted April 7, 2020 Has anyone got a NVidia GT730 card working? I see it's in the supported driver list but mine doesn't show up. Link to comment
Cessquill Posted April 7, 2020 Share Posted April 7, 2020 27 minutes ago, aussben said: Has anyone got a NVidia GT730 card working? I see it's in the supported driver list but mine doesn't show up. I can't see it on this list https://developer.nvidia.com/video-encode-decode-gpu-support-matrix so you won't likely be able to use it for transcoding even if it did show up I'm afraid. Link to comment
tjb_altf4 Posted April 7, 2020 Share Posted April 7, 2020 42 minutes ago, aussben said: Has anyone got a NVidia GT730 card working? I see it's in the supported driver list but mine doesn't show up. 13 minutes ago, Cessquill said: I can't see it on this list https://developer.nvidia.com/video-encode-decode-gpu-support-matrix so you won't likely be able to use it for transcoding even if it did show up I'm afraid. GT 730 is on that list, but anything older than previous gen cards are hidden... you need to press the button under "For a complete list, click on the buttons below to open the complete tables" Link to comment
Cessquill Posted April 7, 2020 Share Posted April 7, 2020 11 minutes ago, tjb_altf4 said: GT 730 is on that list D'OH! Ignore me Link to comment
Marshalleq Posted April 7, 2020 Share Posted April 7, 2020 Well, for the first time, I am now too getting the dreaded Warning: file_get_contents(https://lsio.ams3.digitaloceanspaces.com/?prefix=unraid-nvidia/): failed to open stream: HTTP request failed! in /usr/local/emhttp/plugins/Unraid-Nvidia/include/exec.php on line 45 etc. I checked it yesterday, was needing to do some encoding so thought I'd try running it, and it worked, but the server was busy, so thought I'd do this morning. This morning it says this. That to me says it something external to our networks and more common to the digital ocean side. I don't run pi-hole or any kind of filtering. It's direct to internet. It's a Gigabit Fibre Optic connection and no updates have been applied to the firewall since yesterday. Just thought this might help to narrow down the cause for someone at some point. Link to comment
Xaero Posted April 8, 2020 Share Posted April 8, 2020 On 4/6/2020 at 8:13 PM, Markland said: First specs: unraid 6.8.2 - from the version from the unraid nvidia plugin threadripper 1950X 128GB Ram 3 x gtx970 1 x quadro 2000 Hi Guys. I just have a quick question for everyone using the netdata docker in conjunction with unraid nvidia and also everyone else . I have been trying to pass through my gpus to netdata for like the last 2 weeks trying all different kinds of steps like putting in the correct extra parameters into the docker. I followed what others have done like: But even with that I cant see nvidia-smi in the docker from the console. I have a folding at home docker and that can see nvidia-smi with no issues but I cant seem to get it to work with the netdata docker. Others have also had this issue with the docker. Are we doing something wrong? Steps I have tried: Just one gpu Uninstalling and reinstalling apps, dockers, plugins, Passing through individual UUIDs of cards rather than just "all" Running scrips mentioned by others to make sure the correct config is edited I even went as far as installing random dockers and putting in the above variable and parameters and nvidia-smi worked in them.... nvidia-smi is provided by the nvidia docker runtime. On your netdata docker are you using --runtime=nvidia in the additional parameters? If not it won't have nvidia-smi. Link to comment
Markland Posted April 10, 2020 Share Posted April 10, 2020 On 4/8/2020 at 6:04 PM, Xaero said: nvidia-smi is provided by the nvidia docker runtime. On your netdata docker are you using --runtime=nvidia in the additional parameters? If not it won't have nvidia-smi. I did add the --runtime=nvidia and it didnt work. I was able to get it to work with another container the has a glib added. On 4/7/2020 at 8:44 PM, Markland said: Guys I posted this on Reddit and got it to work by using a different docker. Linked is the Reddit thread. And what I did: "I took D34DC3N73R's docker and shoved it in Data-monkey aka roland's template from the CA Hub and tada it works. All of my gpus that support nvidia-smi showed up! Now onto custom configs and things. Muahahaha!" I dont know if everything works but it seems to be! D34DC3N73R's docker: https://hub.docker.com/r/d34dc3n73r/netdata-glibc Link to comment
Xaero Posted April 10, 2020 Share Posted April 10, 2020 2 hours ago, Markland said: I did add the --runtime=nvidia and it didnt work. I was able to get it to work with another container the has a glib added. Interesting, admittedly I don't use the docker myself, the glibc dependency must have either changed or been removed so it doesn't work anymore. Good that you got it working! 1 Link to comment
sarieri Posted April 13, 2020 Share Posted April 13, 2020 Hi, I don't know if I met a bug or it's just the way it is. I appreciate any comment or idea. So my graphic card is a gigabyte 1650super windforce which should have their fans stop under certain temperature. The weird thing here is that whenever I start emby in docker, the fan speed is 0(which is right). However, whenever emby is not started, fan speed will be at about 60% and temperature below 30 celcius. I tried to type in nvidia-smi -l in ssh when emby is not started and the fan stops in a few seconds, and it keeps that way as long as nvidia-smi -l runs in background, but if I hit ctrl+C to stop the nvidia-smi -l from running, the fan speed again goes up to 60%. Link to comment
MowMdown Posted April 13, 2020 Share Posted April 13, 2020 On 3/31/2020 at 11:03 AM, deaerator said: Is it possible to use the Nvidia runtime Docker container instead of the plugin? Negative. The plugin is needed to install the nvidia-unraid build to the usb boot drive. Without this plugin Nvidia GPUs wouldn't work at all with unraid. Link to comment
medic6578 Posted April 14, 2020 Share Posted April 14, 2020 I have a nvidia quadro p2000 GPU on unraid build 6.8.3 and with the GPU Stats plug-in i get the “nv000908rm+0x1bf/0x1f0 [nvidia] mapping multiple BARs” filling up my syllogism. Once removed it no longer writes to the syllogism. Link to comment
Recommended Posts