ChatNoir Posted September 15, 2021 Share Posted September 15, 2021 1 hour ago, Fuggin said: Love this feature....now if we could just get a cell phone app! Not using it, but there is a community mobile app : Link to comment
Fuggin Posted September 15, 2021 Share Posted September 15, 2021 2 hours ago, ChatNoir said: Not using it, but there is a community mobile app : I know about that one but I would prefer an app made by limetech. 1 Link to comment
Arbadacarba Posted October 7, 2021 Share Posted October 7, 2021 I just performed a MAJOR update on my server hardware, new CPU, Mainboard, and smaller NIC. I spent HOURS getting it up and running to the point where it could serve the house as router (pfSense) and Media Streamer. Along with creating Users, Naming Shares, configuring Drive Mapping and installing some of my most used pluggins and creating my Hardware Centric Gaming VM. (You know, the important stuff) And then I moved the key over to my new thumbdrive... I assume it pulled my backup from "My Servers"? Did I miss a warning? It restore a backup of my flash drive destroying all my hard work and making the whole thing unusable... Very frustrating. Link to comment
ljm42 Posted October 7, 2021 Share Posted October 7, 2021 1 hour ago, Arbadacarba said: I assume it pulled my backup from "My Servers"? Did I miss a warning? It restore a backup of my flash drive destroying all my hard work and making the whole thing unusable... I can assure you there is no code to restore a backup over an existing installation. The only way to get a backup is to download a zip file from the My Servers dashboard, there is nothing automatic. 1 hour ago, Arbadacarba said: And then I moved the key over to my new thumbdrive... Exactly what steps did you take to do this? If you copied the entire /config folder, that would have overwritten your settings. If you copied just the key file that would have been safe. Link to comment
Arbadacarba Posted October 7, 2021 Share Posted October 7, 2021 I had copied just the key file... I had installed from the USB Creator onto a new USB drive and registered the trial... Then installed my most important VM's and such. Then rebooted and was the victim of my own "cleverness". Rebooting with the trial key (which needs an internet connection to verify its validity and then start the array), on a system that houses it's own router in a VM, (which requires the Array to be started to run even though it's not, itself on the Array) might have been a poor choice. I wonder... Was it the existing Appdata, System, and Domain folders that made it look like it had recovered? I might have jumped the gun and made an assumption. My appologies if so. My real goal here is to get rid of the Cruft, that I have created over the past year of customizations to the Go file etc. for my old system. Of course mixed into all of this is troubleshooting a few little hardware conflicts on the new system. Thanks for the response Link to comment
Dondo70 Posted October 12, 2021 Share Posted October 12, 2021 I have this situation, but the server is running well. I will try to restart the API and I let you know if is going good or not. Link to comment
interwebtech Posted October 12, 2021 Share Posted October 12, 2021 4 hours ago, Dondo70 said: I have this situation, but the server is running well. I will try to restart the API and I let you know if is going good or not. I'm am seeing the same thing. Link to comment
interwebtech Posted October 12, 2021 Share Posted October 12, 2021 3 minutes ago, interwebtech said: I'm am seeing the same thing. unraid-api restart fixed it 1 Link to comment
Dondo70 Posted October 13, 2021 Share Posted October 13, 2021 21 hours ago, interwebtech said: unraid-api restart fixed it Thanks Link to comment
Craig Dennis Posted October 13, 2021 Share Posted October 13, 2021 On 10/12/2021 at 8:12 AM, interwebtech said: unraid-api restart fixed it Ran into the same issue but `unraid-api restart` doesn't resolve it. The flash backup also just says 'loading'. No errors in the log. No browser/console errors. Adblock and such are disabled. Link to comment
ljm42 Posted October 13, 2021 Share Posted October 13, 2021 32 minutes ago, Craig Dennis said: Ran into the same issue but `unraid-api restart` doesn't resolve it. The flash backup also just says 'loading'. No errors in the log. No browser/console errors. Adblock and such are disabled. Would you please remove the My Servers plugin and reinstall it? Pay attention to the wall of text on the install screen, it will alert you if there are any DNS issues that need to be resolved. If flash backup continues to have issues, please see the release notes from yesterday: https://forums.unraid.net/topic/112073-my-servers-releases/?tab=comments#comment-1043427 Link to comment
Craig Dennis Posted October 15, 2021 Share Posted October 15, 2021 After a few reboots it seems to have suddenly started working 1 Link to comment
orlando500 Posted October 23, 2021 Share Posted October 23, 2021 hi i just noticed my backup of flash was not up to date. i have removed and installed the plugin again. but still get: Link to comment
i1mran92 Posted October 25, 2021 Share Posted October 25, 2021 (edited) hi there. my servers is showing an error "not connected to mothership" what i tried so far but still unsuccessful: rebooted the server re-install the my servers plugin tried unraid-api restart in settings remote access is enabled and port forwarding show it is able to access from outside. dubugging shows this ☁️ RELAY:200:OK:RECONNECTING:NOW ☁️ RELAY:200:OK:RECONNECTING:NOW ☁️ RELAY:200:OK:RECONNECTING:NOW ☁️ RELAY:200:OK:RECONNECTING:NOW libvirt: No changes detected. ☁️ RELAY:200:OK:RECONNECTING:NOW ☁️ RELAY:200:OK:RECONNECTING:NOW ☁️ RELAY:200:OK:RECONNECTING:NOW ☁️ RELAY:200:OK:RECONNECTING:NOW libvirt: No changes detected. ☁️ RELAY:200:OK:RECONNECTING:NOW ☁️ RELAY:200:OK:RECONNECTING:NOW ☁️ RELAY:200:OK:RECONNECTING:NOW ☁️ RELAY:200:OK:RECONNECTING:NOW libvirt: No changes detected. ☁️ RELAY:200:OK:RECONNECTING:NOW anything else i could do to resolve this? thank you edit resolved after another reboot. false alarm. thanks Edited October 25, 2021 by i1mran92 1 Link to comment
no1warr1or Posted October 28, 2021 Share Posted October 28, 2021 Wanted to throw in that the plugin would not stay signed in after it updated and when I went to the plugin config the page kept refreshing when trying to pull the flash backup status. I used the above mentioned command unraid-api restart and it fixed the issue. 1 Link to comment
sir_storealot Posted November 2, 2021 Share Posted November 2, 2021 (edited) Enabling remote access is a nice feature, but I use wireguard for that and Im very happy with it. However, what would be really needed to improve the current state of remote access, is a web-interface variant that is designed for and renders correctly on mobile devices. It is past time that this is added, without any crutches like 3rd-party Apps etc. Edited November 2, 2021 by sir_storealot 1 Link to comment
semicole Posted November 3, 2021 Share Posted November 3, 2021 I'm having the same issue, but none of the fixes have worked for me. I am getting the "not connected to mothership" error in the top right drop down menu. My server is functioning fine other than this issue. I have tried the following: -rebooted numerous times -ran unraid-api restart command numerous times, both before and after a reboot -uninstalled and re installed My Servers plugin I'm at a loss as to what to do now. Link to comment
zspearmint Posted November 3, 2021 Share Posted November 3, 2021 We've identified a potential cause for the issue and are working on a fix. 2 Link to comment
clowrym Posted November 5, 2021 Share Posted November 5, 2021 (edited) For some reason when I try and sign in, a pop up appears, i sign in fine, then the window closes, but it still tell sme to sign in!! Edit, I manually deleted the plugin as it didnt show up, and couldnt install, and now everything seems to be wrking Edited November 5, 2021 by clowrym Link to comment
xorinzor Posted November 6, 2021 Share Posted November 6, 2021 Please add the feature for local flash backup, rather then online flash backup. I'm aware there's the CA Appdata Backup / Restore plugin available currently, but it's also deprecated since 6.9. 2 Link to comment
mathgoy Posted November 12, 2021 Share Posted November 12, 2021 I uninstalled the plugin since I would like to revert back so I can access my server with the good old local ip address. I went through the unstinstallation process but when I type in my local ip adress in my browser, it is still going through the DNS. What did I miss? Thanks! Link to comment
trurl Posted November 12, 2021 Share Posted November 12, 2021 9 minutes ago, mathgoy said: What did I miss? https://wiki.unraid.net/My_Servers#How_to_disable_SSL_for_local_access 1 Link to comment
Meannekes Posted November 15, 2021 Share Posted November 15, 2021 (edited) today i was on my unRaid Server remotly and everything worked fine. in the upper right corner i saw, i wasnt logged in?! (but was before last time i was on my server a few days ago) without thinking alot about that i just signed in and now my Server is listet offline and i cant reach it anymore from here at work. i´m on RC2 Edited November 15, 2021 by Meannekes Link to comment
Necrotic Posted November 17, 2021 Share Posted November 17, 2021 So I was wondering, does this work if you haven't started the array? (ie stuff like dockers dont work until then) I was just wondering as I have it set in case of power loss for it to restart on power, but I need to log-in to start the array, would this let me do this remote? Link to comment
ljm42 Posted November 17, 2021 Share Posted November 17, 2021 14 minutes ago, Necrotic said: So I was wondering, does this work if you haven't started the array? (ie stuff like dockers dont work until then) I was just wondering as I have it set in case of power loss for it to restart on power, but I need to log-in to start the array, would this let me do this remote? When you say "this", are you referring to the optional Remote Access feature of My Servers? Yes it does work without the array being started. Link to comment
Recommended Posts